• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.79-83
• /
• 2000

A sliding mode fuzzy control (SMFC) with disturbance estimator is applied to design a controller for the third generation benchmark problem on an wind-excited building. A distinctive feature in vibration control of large civil infrastructure is the existence of large disturbances, such as wind, earthquake, and sea wave forces. Those disturbances govern the behavior of the structure, however, they cannot be precisely measured, especially for the case of wind-induced vibration control. Since the structural accelerations are measured only at a limited number of locations without the measurement of the wind forces, the structure of the conventional control may have the feed-back loop only. General structure of the SMFC is composed of a compensation part and a convergent part. The compensation part prevents the system diverge, and the convergent part makes the system converge to the sliding surface. The compensation part uses not only the structural response measurement but also the disturbance measurement, so the SMFC has a feed-back loop and a feed-forward loop. To realize the virtual feed-forward loop for the wind-induced vibration control, disturbance estimation filter is introduced. the structure of the filter is constructed based on an auto regressive model for the stochastic wind force. This filter estimates the wind force at each time instance based on the measured structural responses and the stochastic information of the wind force. For the verification of the proposed algorithm, a numerical simulation is carried out on the benchmark problem of a wind-excited building. The results indicate that the present control algorithm is very efficient for reducing the wind-induced vibration and that the performance indices improve as the filter for wind force estimation is employed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.3
• /
• pp.221-229
• /
• 2018

Various types of dried laver Pyropia yezoensis have been produced in response to increasing demand and other laver goods manufactured using different processing methods are continuously being developed. The dried laver used in this experiment was initially heated at $165^{\circ}C$ for 3 seconds, followed by second heating at a high temperature ($340-350^{\circ}C$) to increase the storage period and enhance taste and flavor. Nutrient analysis of each sample heated under three conditions revealed that the protein and lipid contents were highest in samples from D company, while the carbohydrate contents remained relatively stable. After storage for 10 weeks at room temperature, changes in the composition were evaluated. The results showed decrease in protein (30%-49%) and essential amino acid contents. During storage, the major unsaturated fatty acids contained in dried laver slightly changed to 53.4%-56.0% in the form of EPA, while saturated fatty acids slightly increased to 18.4%-22.6% in the form of palmitic acid. The variables derived from fatty acid composition, such as atherogenic and thrombogenic, and hypocholesterolemic/hypercholesterolemic dietary indices, and polyunsaturated fatty acids/saturated fatty acids ratio, also indicated reasonable levels of stability. However, the laver should be consumed within 2 months.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.3
• /
• pp.557-565
• /
• 2015

Sea level rise due to global warming causes seawater intrusion into aquifers in coastal areas. Seawater intrusion vulnerability index was developed using PSR (Pressure, State, Response) model and analysis hierarchy process (AHP). Coastal regions in Korea, Gangwon-do Sokcho-si, Incheon-si Ganghwa-gun, Chungcheongnam-do Taean-gun, Jeollanam-do Yeosu-si, Jindo-gun were chosen and 14 indicators were selected by considering the humanities, economic, social, environmental aspects. Re-scaling method was used for the standardization of indices and questionnaire survey was performed to calculate weight values for each index. The results showed that Yeosu-si was selected as the most vulnerable region to seawater intrusion. The seawater intrusion index developed in this research can be used to analyze the vulnerable regions to seawater intrusion and to establish a policy to minimize the seawater intrusion problems in coastal regions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.4
• /
• pp.311-318
• /
• 2002

Planting date of soybeans [Glycine max (L.) Merr.] is one of production components in cultural systems. The objective of the current study was to identify the components of soybean production and cultural practices encompassing planting dates and cultivars that respond to dry matter accumulation, harvest index and yield components. Three determinate soybean cultivars were planted on May 13 (early), June 3 (mid), and June 24 (late). Planting density was 60$\times$15cm with 2 seeds (222,000 plants per ha). Soybean plants were sampled every 10 days interval from the growth stages of V5 to R8 and separated into leaves including petioles, stems, pods, and seeds. Dry matter accumulations, harvest indices, and yield components were measured. Early planting had taken 55 days from VE to R2 and late planting taken 39 days indicating reduced vegetative growth. Early planting showed higher leaf, stem, pod and seed dry weights than late planting. However, late planting appeared to be higher harvest index and harvesting rate. Vegetative mass including leaf and stem increased to a maximum around R4/R5 and total dry weight increased to a maximum around R5/R6 and then declined slightly at R8. The highest seed yield was obtained with mid planting and no difference was found between early and late plantings. Cultivar differences were found among planting dates on growth characteristics and yield components. The results of this experiment indicated that soybean yield in relation to planting dates examined was mainly associated with harvest index and harvesting rate, and planting date of cultivars would be considered soybean plants to reach the growth stage of R4/R5 after mid August for adequate seed yield.

• Clinical and Experimental Pediatrics
• /
• v.60 no.11
• /
• pp.353-358
• /
• 2017

Purpose: To develop and evaluate a simple screening tool to assess hearing loss in newborns. A derived score was compared with the standard clinical practice tool. Methods: This cohort study was designed to screen the hearing of newborns using transiently evoked otoacoustic emission and auditory brain stem response, and to determine the risk factors associated with hearing loss of newborns in 3 tertiary hospitals in Northern Thailand. Data were prospectively collected from November 1, 2010 to May 31, 2012. To develop the risk score, clinical-risk indicators were measured by Poisson risk regression. The regression coefficients were transformed into item scores dividing each regression-coefficient with the smallest coefficient in the model, rounding the number to its nearest integer, and adding up to a total score. Results: Five clinical risk factors (Craniofacial anomaly, Ototoxicity, Birth weight, family history [Relative] of congenital sensorineural hearing loss, and Apgar score) were included in our COBRA score. The screening tool detected, by area under the receiver operating characteristic curve, more than 80% of existing hearing loss. The positive-likelihood ratio of hearing loss in patients with scores of 4, 6, and 8 were 25.21 (95% confidence interval [CI], 14.69-43.26), 58.52 (95% CI, 36.26-94.44), and 51.56 (95% CI, 33.74-78.82), respectively. This result was similar to the standard tool (The Joint Committee on Infant Hearing) of 26.72 (95% CI, 20.59-34.66). Conclusion: A simple screening tool of five predictors provides good prediction indices for newborn hearing loss, which may motivate parents to bring children for further appropriate testing and investigations.

• The Korean Journal of Applied Statistics
• /
• v.29 no.1
• /
• pp.243-255
• /
• 2016

The developed composite index has limits to estimate and predict economic status due to economic pattern change and the response change of explanatory variables. A higher precedence individual indicators should be selected to predict the future accurately. In this study, effectiveness of Jeju Island precedence indicators consists of constituents in the area, the consumer price index, services production index, mining and manufacturing production index. The average temperature of Seogwipo and credit card purchase amount is reviewed as an economic turning point consideration and time lag correlation analysis with real data. In addition, we suggest the proper reference cycle in Jeju composite precedence index and evaluate the configuration in leading indicators for Jeju by comparing national economic indicators. Based on the derived results, the current problems of Jeju Island precedence indicators will be illustrated and the improvement methods to estimate a regional composite index will be suggested.

• Parasites, Hosts and Diseases
• /
• v.35 no.3
• /
• pp.181-188
• /
• 1997

In order to clarify the effect of cryptosporidiosis on immune response, histopathological changes associated with experimentally occurring bursal cryptosporidiosis in chickens were chronologically observed as the first step. A total of 150 2-day-old chickens was each inoculated orally with a single dose of 5 × 105 Cryptospori,mum bailevi oocysts. The chickens showed a normal profile of oocyst shedding in droppings. The bursa indices throughout the experimental period indicated negligible reactions. Numerous cryptosporidia occurred in the microvillous border of bursal epithelium between days 4 and 16 postinoculation (PI). Appearance of the most mast cells was followed by a dramatic loss of the protozoa in the bursa of Fabricius (BF). The distribution of the coccidium coincided with heterophil infiltration in the epithelium and adjacent lamina propria. The histopathological lesion was marked diffuse chronic superficial purulent bursitis with heterophil infiltration in the epithelium and adjacent lamina proprla and mucosal epithelial hyperplasia. These results suggest that the bursitis may induce immunosuppressive effect.

• Smart Structures and Systems
• /
• v.26 no.4
• /
• pp.451-468
• /
• 2020

Although model updating has been widely applied using a specific optimization algorithm with a single objective function using frequencies, mode shapes or frequency response functions, there are few studies that investigate hybrid optimization algorithms for real structures. Many of them did not take into account the sensitivity of the updating parameters to the model outputs. Therefore, in this paper, optimization algorithms and sensitivity analysis are applied for model updating of a real cable-stayed bridge, i.e., the Kien bridge in Vietnam, based on experimental data. First, a global sensitivity analysis using Morris method is employed to find out the most sensitive parameters among twenty surveyed parameters based on the outputs of a Finite Element (FE) model. Then, an objective function related to the differences between frequencies, and mode shapes by means of MAC, COMAC and eCOMAC indices, is introduced. Three metaheuristic algorithms, namely Gravitational Search Algorithm (GSA), Particle Swarm Optimization algorithm (PSO) and hybrid PSOGSA algorithm, are applied to minimize the difference between simulation and experimental results. A laboratory pipe and Kien bridge are used to validate the proposed approach. Efficiency and reliability of the proposed algorithms are investigated by comparing their convergence rate, computational time, errors in frequencies and mode shapes with experimental data. From the results, PSO and PSOGSA show good performance and are suitable for complex and time-consuming analysis such as model updating of a real cable-stayed bridge. Meanwhile, GSA shows a slow convergence for the same number of population and iterations as PSO and PSOGSA.

• Journal of Radiation Protection and Research
• /
• v.14 no.1
• /
• pp.8-15
• /
• 1989

After administration of $^{99m}TC,\;^{67}Ga,\;^{131}I,\;^{32}P\;and\;^{238}U(UO_2(NO_2)_3{\cdot}6H_2O)$, in male rats, toxic effects were examined by determining the biological materials in blood. Dosages of radio-nuclides injected are based on the amounts routinely administered to patients, and concentrations of BUN, creatinine, SGOT, SGPT and $PGE_2$ in plasma are determinated as indices to the biochemical response. No increase of creatinine was observed after injection of $^{99m}TC$. Concentrations of BUN, SGOT and $PGE_2$ were not significantly increased in comparison with before-administration. Administration of $^{67}Ga,\;^{131}I\;and\;^{32}P$, did not significantly change BUN, SGPT and SGOT, but largely increased $PGE_2$ than control levels. Besides, $^{238}U$ Showed the most severe toxicity. From the above results, we suggest that the determination of $PGE_2$ in plasma can be used as an index in case of elvaluating the effects of radiation toxicity by nuclides used in nuclear medicine.

• Steel and Composite Structures
• /
• v.20 no.1
• /
• pp.127-145
• /
• 2016

Composite column design is strongly influenced by the computation of the critical buckling load, which is very sensitive to the effective flexural stiffness (EI) of the column. Because of this, the behaviour of a composite column under lateral loading and its response to deflection is largely determined by the EI of the member. Thus, prediction models used for composite member design should accurately mirror this behaviour. However, EI varies due to several design parameters, and the implementation of high-strength materials, which are not considered by the current composite design codes of practice. The reliability of the design methods from six codes of practice (i.e., AS 5100, AS/NZS 2327, Eurocode 4, AISC 2010, ACI 318, and AIJ) for composite columns is studied in this paper. Also, the reliability of these codes of practice against a serviceability limit state criterion are estimated based on the combined use of the test-based statistical procedure proposed by Johnson and Huang (1997) and Monte Carlo simulations. The composite columns database includes 100 tests of circular concrete-filled tubes, rectangular concrete-filled tubes, and concrete-encased steel composite columns. A summary of the reliability analysis procedure and the evaluated reliability indices are provided. The reasons for the reliability analysis results are discussed to provide useful insight and supporting information for a possible revision of available codes of practice.