• 대한인간공학회지
• /
• 제32권3호
• /
• pp.217-227
• /
• 2013

Objective: The purpose of this study was to analyze 'response time', 'peak response time' and 'overshoot value' for each muscle by applying the EMG signal to the vehicle response in ISO 7401 and to quantify the response of the driver according to vehicle characteristics by comparing vehicle characteristics and muscle responses of the driver. Background: The Open-loop test defined in international standards ISO 7401 is the only method for evaluating the performance of the vehicle. However, this test was focused only on mechanical responses, not driver's ones. Method: One skilled male driver(22 yrs. experience) was participated in this experiment to measure muscle activities of the driver in transient state. Then the seven muscle signals were applied to calculate 'response time', 'peak response time', and 'overshoot value'. Results: In the analyses of the EMG data, the effects of vehicle type and muscle were statistically significant on the 'response time' and 'peak response time'. Also, the effects of vehicle type, muscle, and lateral acceleration level were statistically significant on the 'overshoot value' in this study. According to the analyses of the vehicle motion data, vehicle motion variable(LatAcc, Roll, YawVel) was statistically significant on the 'response time' and vehicle type, vehicle motion variable, and lateral acceleration level were statistically significant on the 'peak response time', respectively. Conclusion: In the analyses of the 'response time' and 'overshoot value', the data of muscle activities(EMGs) was better index that could evaluate the vehicle characteristic and performance than the data of vehicle motion. In case of peak response time, both EMG and vehicle motion data were good index. Application: The EMGs data from a driver might be applicable as index for evaluation of various vehicle performances based on this study.

• 한국융합학회논문지
• /
• 제12권1호
• /
• pp.205-210
• /
• 2021

본 연구에서는 대상 시스템의 목표 값과 동일한 응답 특성을 얻기 위한 가진 입력 데이터의 생성 방법에 대해 연구하였다. 입력-출력 사이의 전달함수인 주파수 응답함수를 사용하여 가진 입력을 재구성하는 방법에 대해 논하였다. 이를 위하여 수치모델로 세 점에서 부싱으로 연결된 엔진 마운트 모델을 사용하였다. 3 방향의 입력에 대한 응답을 시험값과 비교하고, 목표 값과 동일한 응답을 얻을 수 있도록 가진 입력을 보정하였다. 오차함수를 계산한 다음 이 값이 수렴하는지 판단하여 반복 시뮬레이션을 수행하였다. 반복과정을 통해 시험과 동일한 응답을 가질 수 있도록 조정된 가진 입력 값을 얻을 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.789-795
• /
• 2014

In a demand response (DR) market run by independent system operators (ISOs), load aggregators are important market participants who aggregate small retail customers through various DR programs. A load aggregator can minimize the allocation cost by efficiently allocating its demand response resources (DRRs) considering retail customers' characteristics. However, the uncertain response behaviors of retail customers can influence the allocation strategy of its DRRs, increasing the economic risk of DRR allocation. This paper presents a risk-based DRR allocation method for the load aggregator that takes into account not only the physical characteristics of retail customers but also the risk due to the associated response uncertainties. In the paper, a conditional value-at-risk (CVaR) is applied to deal with the risk due to response uncertainties. Numerical results are presented to illustrate the effectiveness of the proposed method.

• 한국항공운항학회지
• /
• 제31권4호
• /
• pp.56-71
• /
• 2023

This paper describes the significant effects of customer's PAD emotional response according to consumption value of airline goods on brand charisma, brand attitude, and brand loyalty. The result shows that among the consumption values, epistemic value, emotional value, and self-expressive value have a positive effect on PAD emotional response. In addition it was found that the PAD emotional response had positive influence on brand charisma but had no effect on brand attitude. Brand charisma was found to have significant positive influence on brand attitude and both brand charisma and brand attitude had positive effect on brand loyalty. Through the results of this study, airline goods products are an effective means to increase brand loyalty. Further more, this study provides academic and business implications for effective airline goods marketing.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.33-36
• /
• 2007

This study shows the basic data for setting up a response modification factor of unreinforcement masonry structure by considering and analyzing the experiment results of the domestic walls. If the result of this study compare with the value R of KBC-2005, 1.5, the average value, 1.2, is the low value. However, the maximum value, 2.57, is more than 70% bigger than the standard value. The standard value of overstrength factor, 2.5 is judged to have relatively bigger value than this study.

• 한국콘텐츠학회논문지
• /
• 제8권11호
• /
• pp.225-234
• /
• 2008

본 논문은 일차 의료기관을 이용하는 고객들이 느끼는 고객가치가 장기적으로 고객충성도에 영향을 미친다는 것과 고객가치를 대상으로 고객관계관리와 관련된 변수들의 구조적 관계를 밝히고자 하였다. 연구결과 편리가치, 응대가치, 신뢰가치는 고객만족에 영향을 미치는 요인이며 고객만족은 고객충성도, 즉 재구매와 구전의도에 영향을 준다는 것이 확인되었다. 또한 편리가치와 응대가치, 신뢰가치는 고객만족의 완전매개 역할을 통해 재구매에 영향을 미치며 편리가치, 응대가치는 고객만족의 완전매개 역할을 통해 구전의도에 영향을 준다는 것을 확인하였다. 특히 신뢰가치의 경우는 고객만족이 없이도 구전의도를 형성하는 요인이라는 것을 확인하였다.

• 한국공간구조학회논문집
• /
• 제18권2호
• /
• pp.35-42
• /
• 2018

The outrigger damper system is a structural system with excellent lateral resistance when a wind load occurs. However, research on outrigger dampers is still in its infancy. In this study, dynamic response control performance of damper is analyzed according to change of stiffness value and damping value of damper. To do this, a real-scale 3D model of 50 stories has been developed and the artificial wind load has been entered for dynamic analysis. Generally, the larger the damping value, the smaller the stiffness value is, the more effective it is to reduce the maximum displacement and acceleration response. However, the larger the attenuation value as the cost of construction increases, it is necessary to select appropriate stiffness and damping value when applying an outrigger damper.

• 한국식품영양과학회지
• /
• 제30권3호
• /
• pp.466-470
• /
• 2001

Response surface methodology was used for monitoring extraction conditions, based on quality properties of old pumpkin extracts. Hunter's color L value of extracts was maximized at 101℃, 2.6 hr and decreased gradually after maximum point. The polynomial equation for Hunter's color L value showed 10% of significance level and 0.8799 of R². Hunter's color a value was minimized at 117℃, 3.9 hr and R² of polynomial equation was 0.9852 within 1% significance level. Hunter's color b value and ΔE value increased as the extracting temperature and time increased. Extraction yield of old pumpkin was maximized at 110℃, 4 hr and increased in proportional to the extracting temperature and time, but decreased after 113℃ and 2 hr. Viscosity of pumpkin extracts were maximized at 120℃, nearly 3 hr. R² of polynomial equations for yield, viscosity and sugar content were 0.9532, 0.9812 and 0.8869, respectively. Optimum ranges of extraction conditions for quality properties of old pumpkin were 102∼109℃, 2.5∼3.5 hr, respectively. Predicted values at the optimum extraction condition agreed with experimental values.

• Korean Journal of Radiology
• /
• 제20권4호
• /
• pp.589-598
• /
• 2019

Objective: To evaluate whether data acquired from perfusion computed tomography (PCT) parameters can aid in the prediction of treatment outcome after palliative chemotherapy in patients with unresectable advanced gastric cancer (AGC). Materials and Methods: Twenty-one patients with unresectable AGCs, who underwent both PCT and palliative chemotherapy, were prospectively included. Treatment response was assessed according to Response Evaluation Criteria in Solid Tumors version 1.1 (i.e., patients who achieved complete or partial response were classified as responders). The relationship between tumor response and PCT parameters was evaluated using the Mann-Whitney test and receiver operating characteristic analysis. One-year survival was estimated using the Kaplan-Meier method. Results: After chemotherapy, six patients exhibited partial response and were allocated to the responder group while the remaining 15 patients were allocated to the non-responder group. Permeability surface (PS) value was shown to be significantly different between the responder and non-responder groups (51.0 mL/100 g/min vs. 23.4 mL/100 g/min, respectively; p = 0.002), whereas other PCT parameters did not demonstrate a significant difference. The area under the curve for prediction in responders was 0.911 (p = 0.004) for PS value, with a sensitivity of 100% (6/6) and specificity of 80% (12/15) at a cut-off value of 29.7 mL/100 g/min. One-year survival in nine patients with PS value > 29.7 mL/100 g/min was 66.7%, which was significantly higher than that in the 12 patients (33.3%) with PS value ≤ 29.7 mL/100 g/min (p = 0.019). Conclusion: Perfusion parameter data acquired from PCT demonstrated predictive value for treatment outcome after palliative chemotherapy, reflected by the significantly higher PS value in the responder group compared with the non-responder group.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.567-572
• /
• 2008

This paper's purpose is to improve determining of the critical response of curved bridge to multi-component seismic motion. There are several methods to combine responses by multi-component excitation response, 30%, 40% rules and square-root-of-sum (SRSS). These combination rules determine same value of critical response in straight bridges. However, each method has critical response value of different magnitude in curved bridges. Thus a study about critical response of curved bridges is required. This paper presents comparison critical responses value as each combination rule, 30%, 40% rules and SRSS on curved bridges with the different radiuses of curvature. This study was carried out by response spectrum analysis of OO IC steel box girder bridge using SAP2000. It is concluded as follows: 1) In curved bridges, 30% and 40% rules tend to underestimate the critical response relatively to SRSS. 2) When bridges have smaller radiuses than 100m, difference between SRSS and 30% or 40% rules let run errors up as radiuses of curvature decreased.