• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.2
• /
• pp.1-10
• /
• 2016

In this paper, we consider the algorithms and numerical analysis for real-time integrated control system and resource management of large-scale manufacturing smart factory system. There various data transmitted on Cyber-Physical-System (CPS) is necessary to control in real time, as well as the terminal and the platform with respective system service. This will be a true smart manufacturing which consisting of existing research results, and a numerical analysis by the parameter-specific information. In this paper, Jacoby calculation to reflect the optimization algorithms that are newly proposed. It also presents a behavior that optimal operational algorithm on CPS which is adapted to the sensing data. In addition, we also verify the excellence of the real-time integrated control system through experimentation, by comparison with the existing research results.

• Journal of Internet Computing and Services
• /
• v.7 no.6
• /
• pp.113-121
• /
• 2006

To reduce switch cost, the optimum numbers of tunable wavelength converters (TWCs) and internal wavelengths required for contention resolution of asynchronous and variable length packets like internet traffics, is presented in the optical packet switch (OPS) with the shared fiber delay line (FDL) buffer. To optimize TWCs and internal wavelength related to on OPS design cost, we proposed a scheduling algorithm for the limited TWCs and internal wavelengths. For three TWC alternatives (not shared, partially shared, and fully shared cases), the optimum numbers of TWCs and internal wavelengths to guarantee minimum pocket loss are evaluated to prevent resource waste. Under o given load, TWCs and internal wavelengths could be significantly reduced, guaranteeing the same pocket loss probability as the performance of on OPS with full TWCs and internal wavelengths.

• Korean Journal of Agricultural Science
• /
• v.45 no.2
• /
• pp.283-289
• /
• 2018

Agricultural gear reducers are used in a variety of agricultural machinery designs such as in agricultural tractors and transport cars, and even greenhouses. For greenhouses, a gear reducer is used to control windows on the side and the roof. Gear reducers for agricultural applications are designed using the empirical method because of the lack of a standard for experimentation. Simulation is necessary for the optimal design of an agricultural gear reducer. There are many advantages to this optimization such as low-cost maintenance, reduced size, and weight. In this study, bending and contact safety factor simulation for the gear reducer of a greenhouse was conducted by decreasing the face widths of helical gear shaft 2 and shaft 3 from 30.8 and 30 mm, respectively, at an interval of 4 mm. The bending and contact safety factors were calculated using AGMA standard. Simulation results showed that bending and contact safety factors decreased rapidly when the face width of the helical gear on shaft 2 was 30 mm and the face width of helical gear on shaft 3 decreased from 30.8 mm to 26.8 mm, suggesting that it would be safe to reduce the face width of the helical gear on shaft 3 to 26.8 mm. The reduction of the face width also reduced the weight of the agricultural gear. This study suggests that the agricultural gear reducer safety factor decreases as the face width decreases.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.3
• /
• pp.219-225
• /
• 2010

Optimal grinding condition was examined by changing only the size of screen opening with fixing other factors to produce coal fines of particle sizes required for circulating fluidized bed gasifier. At least 85 wt% of the coal particles should fall into the size range of 0.045~1.0 mm for efficient gasification. In this study, hammer mill was used to grind Chinese low rank lignite coal following grinding condition designed by Taguchi method. The analysis of signal to noise ratio showed that optimum grinding condition for the gasifier was 3 mm in primary screen size and 1.3 mm in secondary screen size on the 95% level of significance.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.11
• /
• pp.1566-1573
• /
• 2014

Although most algae cultivation systems are operated in suspended culture, an attached growth system can offer several advantages over suspended systems. Algal cultivation becomes light-limited as the microalgal concentration increases in the suspended system; on the other hand, sunlight penetrates deeper and stronger in attached systems owing to the more transparent water. Such higher availability of sunlight makes it possible to operate a raceway pond deeper than usual, resulting in a higher areal productivity. The attached system achieved 2.8-times higher biomass productivity and total lipid productivity of $9.1g\;m^{-2}day^{-1}$ and $1.9g\;m^{-2}day^{-1}$, respectively, than the suspended system. Biomass productivity can be further increased by optimization of the culture conditions. Moreover, algal biomass harvesting and dewatering were made simpler and cheaper in attached systems, because mesh-type substrates with attached microalgae were easily removed from the culture and the remaining treated wastewater could be discharged directly. When the algal biomass was dewatered using natural sunlight, the palmitic acid (C16:0) content increased by 16% compared with the freeze-drying method. There was no great difference in other fatty acid composition. Therefore, the attached system for algal cultivation is a promising cultivation system for mass biodiesel production.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1B
• /
• pp.71-79
• /
• 2003

As the traffic grows rapidly in the Internet, the QoS guarantee of the flows and the traffic engineering problems have become very important issues. MPLS has more advantages to solve the problems than existing IP routing because of its use of multiple paths between the source and destination pairs Particularly, the availability of Constraint-based Shortest Path First(CSPF) algorithm and explicit route in MPLS made the problem referred above to be solved efficiently. However, the CSPF algorithm has the characteristic of selecting the shortest path of all paths which meet the traffics' QoS constraints Therefore, even though there are alternative paths to route traffic, alternate QoS paths may not be found and best-effort traffic will be dropped during congestion period In this paper, we present the network resource optimization method related to the traffic engineering by using load balancing through routing in MPLS network.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.5
• /
• pp.559-571
• /
• 2012

Dimethyl ether (DME) is a new clean fuel as an environmentally-benign energy resource. DME can be manufactured from various energy sources including natural gas, coal, and biomass. In addition to its environmentally friendly properties, DME has similar characteristics to those of LPG. The aim of this article is to represent the development of new DME process with KOGAS's own technologies. KOGAS has investigated and developed new innovative DME synthesis process from synthesis gas in gaseous phase fixed bed reactor. DME has been traditionally produced by the dehydration of methanol which is produced from syngas, a product of natural gas reforming. This traditional process is thus called the two-step method of preparing DME. However, DME can also be manufactured directly from syngas (single-step). The single-step method needs only one reactor for the synthesis of DME, instead of two for the two-step process. It can also alleviate the thermodynamic limitations associated with the synthesis of methanol, by converting the produced methanol into DME, thereby potentially enhancing the overall conversion of syngas into DME. KOGAS had launched the 10 ton/day DME demonstration plant project in 2004 at Incheon KOGAS LNG terminal. In the mid of 2008, KOGAS had finished the construction of this plant and has successively finished the demonstration plant operation. And since 2008, we have established the basic design of commercial plant which can produce 3,000 ton/day DME.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.6
• /
• pp.672-677
• /
• 2016

Development of Internet has been successfully inspired with extensive deployment of the network technology and application. However, increases in Internet usage had caused a lot of traffic overload in these days. Thus, we need a continuous research and development on the network virtualization for effective resource allocation. In this paper, we propose a minimal cost virtual network mapping algorithm using Piecewise Linear Cost Function. We exploited an algorithm with Linear Programming and D-VINE for node mapping, and Shortest Path Algorithm based on linear programming solution is used for link mapping. In this way, we compared and analyzed the average cost for arrival rate of VN request with linear and tree structure. Simulation results show that the average cost of our algorithm shows better efficiency than ViNEyard.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1A
• /
• pp.76-83
• /
• 2009

In this paper, we provide opportunistic scheduling schemes for elastic services in OFDMA systems with fairness constraints for each user. We adopt the network utility maximization framework in which a utility function is defined for each user to represent its level of satisfaction to the service. Since we consider elastic services whose degree of satisfaction depends on its average data rate, we define the utility function of each user as a function of its average data rate. In addition, for fair resource allocation among users, we define fairness requirements of each user by using utility functions. We first formulate an optimization problem for each fairness requirement that aim at maximizing network utility, which is defined as the sum of utilities of users. We then develop an opportunistic scheduling scheme for each fairness requirement by solving the problem using a dual approach and a stochastic sub-gradient algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9A
• /
• pp.888-897
• /
• 2007

In this paper, we propose an uplink dynamic resource allocation algorithm to increase sector throughput and fairness among users in 802.16e OFDMA TDD system. In uplink, we address the difference between uplink and downlink channel state information in 802.16e OFDMA TDD system. The simulation results show that not only an increment of 10% of sector throughput but higher level of fairness is achieved by round-robin using the FLR and the rate / margin adaptive inner closed-loop power control algorithm. The FLR algorithm determines the number of sub-channels to be allocated to the user according to the user's position. Also, we get 31.8% more sector throughput compared with the round-robin using FLR by FASA algorithm using uplink channel state information. User selection, sub-channel allocation, power allocation algorithms and simulation methodology are mentioned in Part I.