• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1166-1168
• /
• 2004

The high frequency series resonant converter has been widely used for the non-contact power supply system with the large air gap and the increased leakage inductance of the non-contact transformer. However. the high frequency series resonant converter has the disadvantages of high voltage gain characteristics in the overall load range due to the large air gap and the circulating magnetizing current. In this paper, unit voltage gain is revealed in the proposed three-level series-parallel resonant converter. The results are verified on the simulation results and the 5kW experimental prototype.

• 한국전기전자재료학회논문지
• /
• 제13권11호
• /
• pp.932-937
• /
• 2000

The length extensional vibration mode of a piezoelectric ceramic substrate is used in fabricating the ultra-small size resonators and filters. In general, the three side ratios of the rectangular substrate affect the resonant characteristics of the resonator using its length extensional vibration. In this paper, their relationships are studied. We know that changing the ratio of its length to its width makes possible to change the resonant frequency of the width vibration without degrading the length extensional vibration. And frequency constant for length extensional vibration becomes slightly small as the substrate thickness becomes thin, but it does not change as its length changes. Electro-mechanical coupling factor for length extensional vibration, k$\_$31/ does not change as its length changes within length/width$\geq$4, but it becomes small as its width increases.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.625-626
• /
• 2012

A coupled magnetic resonance system (CMRS) using compact coil sets with core driven by a class-E inverter was proposed. The source and load coils of conventional CMRS were replaced with two coils containing core so that the system can be quite compact in size and easy to design due to a resonance frequency for all resonant tanks regardless of coupling factor. Experiments for 500 kHz switching frequency show 40% system efficiency.

• 한국지반공학회논문집
• /
• 제22권5호
• /
• pp.47-57
• /
• 2006

전단파는 흙 입자의 강성과 밀도에 연관된다. 흡 입자의 전단 강성은 물의 존재 여부에 영향을 받지 않는다. 벤더 엘리먼트는 흙과 트랜스듀서 간의 뛰어난 결합 효과를 보여 토질 시험 장치에 적용하기에 편리한 전단파 트랜스듀서이다. 본 논문은 전단파의 기본 원리를 살펴본 뒤, 전자기 커플링 방지, 지향성(directivity), 공진주파수, 초동 추정, 근접장 효과 등을 포함하여 벤더 엘리먼트의 설계와 설치에 대하여 다루었다. 전해질 용액 속에서의 전기적 간섭(cross-talk)현상은 병렬 타입의 벤더 엘리먼트를 사용함으로써 최소화할 수 있다. 캔틸레버 보 형식의 벤더 엘리먼트는 전단파의 지향성은 원형에 가깝게 나타났다. 벤더 엘리먼트의 공진주파수는 벤더 엘리먼트 자체의 특성, 흡의강성 및 엥커 특성에 의존적인 것으로 나타났다. 벤더 엘리멘트 시험에서 가장 어려운 부분 중의 하나는 전단파의 도착시간에 영향을 주는 근접장 효과이다. 근접장 내에서 전단파의 도착시간 산정은 다중반사법(multiple reflection method)과 signal matching 기술을 적용하여 해결할 수 있다. 여러 가지 고려사항이 요구되는 벤더 엘리먼트는 전단파를 이용한 지반 동적 특성 파악에 매우 효과적인 방법이 될 수 있을 것이다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권1호
• /
• pp.33-39
• /
• 2005

Comparing with the conventional transformer without the air gap, a contactless transformer with the large air gap between the long primary winding and the secondary winding has increased leakage inductance and reduced magnetizing inductance. For transferring the primary power to the secondary one, the high frequency series resonant converter has been widely used for the contactless power supply system with the large air gap and the increased leakage inductance of the contactless transformer However, the high frequency series resonant converter has the disadvantages of the low efficiency and high voltage gain characteristics in the overall load range due to the large air gap and the circulating magnetizing current. In this paper, the characteristics of the high efficiency and unit voltage gain are revealed in the proposed three-level series-parallel resonant converter. The results are verified on the simulation based on the theoretical analysis and the 5kW experimental prototype.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.253-256
• /
• 2000

We report the experimental results for the coupling properties of the an side-polished single-mode fiber covered with metal-clad planar waveguide. The experimental results show that the large birefringence of a metal-clad planar waveguide facilitates the effective separation of TE and TM polarization in the spectral domain. Additionally the resonant wavelengths of the device are tuned based in the thermo-optic effect of polymer planar waveguide.

• The Journal of the Acoustical Society of Korea
• /
• 제25권3E호
• /
• pp.110-114
• /
• 2006

In a previous theoretical paper, we have derived a unified formula by considering 2-D coupled mode vibrations. The unified formula for electromechanical coupling coefficient of piezoelectric resonator was verified experimentally. The capacitance change near the resonant frequency was investigated to estimate the effective coupling coefficient of the resonator instead of the conventional method based on I-D model. The susceptance spectra were measured for the seven samples of piezoelectric resonator with different aspect ratio. Excellent agreement between theoretical and experimental results was obtained.

• 한국전자파학회논문지
• /
• 제14권4호
• /
• pp.384-392
• /
• 2003

본 연구에서는 유전체 슬랩으로 덮힌 평행평판 도파관의 좁은 슬릿을 통한 유전체슬랩 위의 도체 스트립과의 전자기적인 결합을 고려하였다. 제안된 구조에서 관찰되는 두 가지의 대조적인 결합현상인 캐비티형 결합과 기생형 결합의 차이점을 도체 스트립의 길이 및 위치, 도체 스트립에 유기된 전류, 복사패턴, 대역폭, 결합슬릿 근처의 전자계분포 등을 비교하여 관찰하였다.

• 한국전기전자재료학회논문지
• /
• 제26권3호
• /
• pp.171-176
• /
• 2013

In this paper, we present a MEMS (micro-electro-mechanical system) implantable blood pressure sensor which has designed and fabricated with consideration of size, design flexibility, and wireless detection. Mechanical and electrical characterizations of the sensor were obtained by mathematical analysis and computer aided simulation. The sensor is composed of two coils and a air gap capacitor formed by separation of the coils. Therefore, the sensor produces its resonant frequency which is changed by external pressure variation. This frequency movement is detected by inductive coupling between the sensor and an external antenna coil. Theoretically analyzed resonant frequency of the sensor under 760 mmHg was calculated to 269.556 MHz. Fused silica was selected as sensor material with consideration of chemical and electrical reaction of human body to the material. $2mm{\times}5mm{\times}0.5mm$ pressure sensors fitted to radial artery were fabricated on the substrates by consecutive microfabrication processes: sputtering, etching, photolithography, direct bonding and laser welding. Resonant frequencies of the fabricated sensors were in the range of 269~284 MHz under 760 mmHg pressure.

• 한국소음진동공학회논문집
• /
• 제15권5호
• /
• pp.527-535
• /
• 2005

This paper explains a general coupling system in terms of the system parameters. impedance of a cavity or mobility of a structure. To easily access the mechanism of the structural-acoustic coupled system, a simple expression is derived. A general coupled equation is also derived of a general coupled problem constituted a flexible structure and an opening boundary in terms of vector and matrix notation, and is analyzed the coupling phenomena using the understanding acquired simple coupled system. The paper shows that the general coupled equation is expanded version of the simple coupled equation by some limiting checks. The paper also shows that the degree of coupling is proportioned to a stiffness of the acoustic system and a modal coupling coefficient, but is in inverse proportion to a mass of the structural system and the difference of the excitation frequency and resonant frequency of the acoustic or structural system.