• 전기학회논문지
• /
• 제57권9호
• /
• pp.1584-1588
• /
• 2008

The Ring Laser Gyroscope makes use of the Sagnac effect within a resonant ring cavity of a He-Ne laser and has more accuracy than the other gyros. The Low Earth Orbit satellite for observatory use require the high accuracy Gyro to control and determine the altitude because of the need of payload pointing accuracy. In this paper, The theory of the Path Length Control is explained. The electrical design of Path Length Controller is described. The Design for Path Length Controller is composed of the demodulator, integrator, phase shifter, high voltage amplifier. We apply the circuit to 28cm square ring laser gyro and get the test results.

• Journal of Magnetics
• /
• 제18권2호
• /
• pp.178-182
• /
• 2013

We have developed a new non-conventional electron paramagnetic resonance (EPR) spectrometer, in which no resonant cavity was used. We previously demonstrated a wide frequency range operation of an EPR spectrometer using two loop antennas, one for a microwave transmission and the other for signal detection [1]. In contrast to Ref. [1], the utilization of a microstrip antenna as a transmitter enhanced a capability of wide-band operation. The replacement of conventional capacitors with varactor diodes makes resonance condition easily reproducible without any mechanical action during tuning and matching procedure since the capacitance of the diodes is controlled electronically. The operation of the new EPR spectrometer was tested by measuring a signal of 1,1-diphenil-2-picrylhydrazyl (DPPH) sample in the frequency range of 0.8-2.5 GHz.

• International Journal of Safety
• /
• 제5권1호
• /
• pp.17-23
• /
• 2006

An investigation was carried out to determine the effect of the thickness of the air-gap installed between the roof metal sheet and the headliner on booming noise in passenger cars. In addition, a way of offering quieter driving condition to drivers and passengers was studied. It was found that a very thin air-gap corresponding to approximately 3/100 of the height of the passenger compartment causes noticeable change in the coupled resonance frequencies and acoustic responses. Furthermore, a guideline is proposed for determining an optimal air-gap thickness during design stage of the air-gap beneath the roof metal sheet for reducing booming noise.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.535-538
• /
• 2002

공진기내에 음향광학소자(AOM)를 사용하여 FSF(Frequency-shifted feedback) 레이저를 수치해석 하였다. 출력 스펙트럼의 Comb 대역폭은 첨두 스펙트럼 세기에서의 순간 발진 주파수와 내부공진기 전계의 Wigner-Ville 분포로부터 유도된 순간 스펙트럼 세기의 식을 이용하여 분석한다. Comb 대역폭은 포화-확산된 대역폭과 FSF 동작에 유도되는 전체 공진 모드의 곱으로 정의된다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권8호
• /
• pp.384-389
• /
• 2005

The Resonance Scattering Theory(RST) provides the physical explanation of the scattered field that appears in the vicinity of the resonance frequency. The theory suggests that the amplitude of each Partial-wave mode can be divided into two components : resonance and non-resonant background. The long-standing difficulty in the application of RST is that it always requires background components. We have applied the RST to the electromagnetic scattering problems by a penetrable spherical scatterer and a cavity. In this paper, we show some numerical results, and validate background coefficients.

• 한국전기전자재료학회논문지
• /
• 제16권4호
• /
• pp.311-316
• /
• 2003

Effects of pores on the microwave properties in microwave dielectric ceramics were studied by a computer simulation. Scattering matrix S$\_$21/ obtained from the network analyzer was compared to the S$\_$21/ obtained from the simulation. From electric field distribution, the dominant resonant TE$\_$01$\delta$/ mode could be easily determined. The effects of the porosity and pore size inside the dielectrics on the microwave properties were investigated by the HFSS simulation. When the total pore volume remains constantly, the quality factor decreased as the pore size Increases. As the total pore volume of the dielectrics increased. quality factor decreased.

• 소음진동
• /
• 제10권1호
• /
• pp.33-40
• /
• 2000

With the increased requirement for automobile noise, a design fo mufflers with higher performances becomes more important in recent days. For a design of some mufflers, it must satisfy both minimizing back pressure and maximizing sound attenuation in broad range of frequecny. Even for a simple Helmholtz resonator, an important element in a muffler, a resonator design with accurate resonant frequency is difficult if one want to consider standing waves within the cavity. In this paper, the genetic algorithm, one of the optimization technique with high capability of global fittest solution and robust convergence, is applied to the design process of mufflers. Results show that the genetic algorithm can be successfully and efficiently used to find the fittest model for both mufflers and Helmoltz resonators.

• 대한전자공학회논문지TC
• /
• 제38권7호
• /
• pp.14-21
• /
• 2001

본 논문에서는 유전체가 삽입된 공진기를 이용하여 C-band용 대역통과 여파기를 설계, 제작하였다. 공진기의 높이는 인접 유전체 공진기의 도파관 차단 주파수로부터 결정된다. 공진기의 지름은 도체 손실을 고려하여 유전체의 두 배로 결정하였다. 유전체 공진기의 공진주파수는 비소멸(non-decaying) 모드 해석법으로 계산하였다. 일반적으로 원통형 유전체 공진기의 공진주파수는 Cohn 모델로 해석하였는데, 이것은 공진기의 벽과 유전체벽 사이에서 전자파가 소멸(decaying)된다는 가정 하에 해석한 방법이다. 그러나， 이 방법은 근사적인 해석방법이다. 외부양호도(external quality factor)인 $Q_{ex}$는 Ansoft의 Maxwell 시뮬레이션 툴을 사용하여 결정하였다. 유전율 45인 유전체를 사용하여 설계한 대역통과 여파기는 5.065GHz의 중심주파수를 가졌다. 삽입손실은 1dB, 밴드 폭은 20MHz, 감쇠 특성은 30dB$(f_0{\pm}15MHz)$)로 설계목표에 만족함을 알 수 있다.

• The Journal of the Acoustical Society of Korea
• /
• 제28권1E호
• /
• pp.9-15
• /
• 2009

In this paper, FSTL (Field Sound Transmission Loss) measured in a mock-up simulating ship cabins is studied. A mock-up is built by using 6 mm steel plate, and two identical cabins are made where 25 mm or 50 mm sandwich panel is used to construct wall and ceiling inside the steel structure. Various wall panels and ceilings are tested, where effects of wall and ceiling panel thickness, and presence of a unit toilet on FSTL are investigated. It is found that the effect of unit toilet on FSTL is at most 1 dB. From the comparison of FSTL for panels of the same thickness of 50 mm, it is observed that panel having inside air cavity of 10 mm shows higher STL than that of the panel without air cavity. Comparison of FSTL for panels of 50 mm and 25 mm thickness shows that dependency on surface density predicted by mass law is not observed. The sandwich panels act as a mass-spring system, which shows a resonant mode that cannot be explained by the mass law. It is also found that STL from laboratory test is higher than FSTL by 5- 10 dB, which can be explained by flanking structure-borne noise transmission path such as ceiling, floor and corridor-facing wall.

• 한국광학회지
• /
• 제16권5호
• /
• pp.476-478
• /
• 2005

전자선 증착기를 이용하여 $1.3{\mu}m$ 중심 파장의 파브리-페로 에탈론을 $Al_{2}O_3$와 a-Si 박막 쌍으로 증착하였다. 제작된 에탈론의 투과율 및 반사율 스펙트럼을 측정하여, 공진 파장에서 투과 반치폭이 ${\sim}12.1\;nm$이며 피네세(finesse) 값은 53임을 알았다. $Al_{2}O_3$ 단일박막의 광학 상수는 타원분광기법으로 측정하였다. $Al_{2}O_3$와 a-Si 박막 에탈론의 측정을 통하여 a-Si 박막의 굴절률은 각각 실수부 3.120, 허수부 0.002로 측정하였다. 이러한 박막 쌍은 $1.3{\mu}m$ 파장 표면방출레이저의 출력 반사경으로 사용 가능하다.