• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.343-343
• /
• 2008

Newly designed structure of a thin ultrasonic rotary motor was proposed. Thin brass plate was used as a cross shaped vibrator and eight ceramic plates were attached on the upper and bottom sides of the brass plate as in Figure 1. The thin type ultrasonic motor has the structure adherent piezoelectric ceramic on the top and bottom surface of the thin elastic body. The direction of polarization is decided so as to occur the elliptical displacement in regular sequence at touch point A, B, C and D of stator contacted with rotor. By applying two electric fields which have 90 degree phase difference on the ceramics, each contact points make rotational displacements as in figure 2. Finite element analysis program ATILA was used to find the optimal size of the stator. As a result of the simulation, elliptical displacements of the tips were obtained at off-resonance frequencies. The maximum displacements of the contact tips were obtained at the length of 16[mm], width of 6[mm] and thickness of 0.4[mm]. Changes of the resonance frequencies were inversely proportional to the length of ceramic and proportional to the width of ceramic. Elliptical motions of the contact tips. of the stator were consistently obtained at off resonance frequencies. From a prototype motor, speed of 600[rpm] was obtained at 20[Vrms].

• 센서학회지
• /
• 제27권6호
• /
• pp.421-426
• /
• 2018

To develop a piezoelectric inkjet printhead for high-resolution and high-speed printing, we studied the characteristics of an inkjet printhead by analyzing the major design parameters. An analytical model for the inkjet printhead was established, and numerical analysis of the coupled first-order differential equation for the defined state variables was performed using state equations. To design the dimension of the inkjet printhead with a driving frequency of 100 kHz, the characteristics of the flow rate and discharge pressure of the nozzle were analyzed with respect to design variables of the flow chamber, effective sound wave velocity, driving voltage, and voltage waveform. It was predicted that the change in the height of the flow chamber does not significantly affect the Helmholtz resonance frequency and discharge speed of the nozzle. From the analysis of change in flow chamber width, it is observed that as the width of the flow chamber increases, the ejection speed greatly increases and the Helmholtz resonance frequency decreases considerably, thereby substantially affecting the performance of the inkjet printhead.

• 한국소프트웨어감정평가학회 논문지
• /
• 제15권1호
• /
• pp.109-114
• /
• 2019

본 논문은 프로브 핀에 대한 S-파라미터 시뮬레이션과 특성 임피던스 시뮬레이션을 수행하였고 이를 통해 프로브 핀의 고주파 성능을 분석하였다. 프로브 핀은 중앙의 한 개의 신호 핀과 상하좌우의 네 개의 접지 핀으로 배치하였다. 프로브 핀 사이의 간격을 0.35 mm, 0.40 mm, 0.50 mm으로 증가시키면서 프로브 핀의 삽입손실과 반사손실을 계산하였다. 반사손실의 주기적인 공진 현상으로 인해 프로브 핀은 서로 다른 삽입손실 특성을 가진다. 또한 프로브 핀의 배치와 피치 변화에 따른 특성 임피던스 분석을 수행하였다. 동일한 피치에서 특성 임피던스가 50 Ω에 근접하는 접지 핀 개수가 있음을 확인하였다.

• 한국축산식품학회지
• /
• 제41권2호
• /
• pp.312-323
• /
• 2021

The purpose of this study was to use 1H nuclear magnetic resonance (1H NMR) to quantify taste-active and bioactive compounds in chicken breasts and thighs from Korean native chicken (KNC) [newly developed KNCs (KNC-A, -C, and -D) and commercial KNC-H] and white-semi broiler (WSB) used in Samgye. Further, each breed was differentiated using multivariate analyses, including a machine learning algorithm designed to use metabolic information from each type of chicken obtained using 1H-13C heteronuclear single quantum coherence (2D NMR). Breast meat from KNC-D chickens were superior to those of conventional KNC-H and WSB chickens in terms of both taste-active and bioactive compounds. In the multivariate analysis, meat portions (breast and thigh) and chicken breeds (KNCs and WSB) could be clearly distinguished based on the outcomes of the principal component analysis and partial least square-discriminant analysis (R2=0.945; Q2=0.901). Based on this, we determined the receiver operating characteristic (ROC) curve for each of these components. AUC analysis identified 10 features which could be consistently applied to distinguish between all KNCs and WSB chickens in both breast (0.988) and thigh (1.000) meat without error. Here, both 1H NMR and 2D NMR could successfully quantify various target metabolites which could be used to distinguish between different chicken breeds based on their metabolic profile.

• 전자공학회논문지
• /
• 제53권10호
• /
• pp.123-130
• /
• 2016

고주파 유도가열장치는 LC 공진회로에 고주파 전원을 인가하여 금속을 가열 할 수 있다. 공진회로는 워크 코일과 전도 냉각 커패시터로 구성되며, 커패시터의 특성에 따라 열처리 설비의 성능을 좌우한다. 그러나 전도 냉각 커패시터는 국내 원천기술의 연구개발 부족으로 해외 수입 의존도가 높다. LC 공진 시 커패시터 내부의 발열을 최소화하고, 무효 전력손실을 줄이며, 내 전압특성이 우수한 커패시터가 요구된다. 국산화를 위하여, 선진 제조사의 완성품 커패시터의 주파수 응답 특성 분석에 대한 선행 연구가 필요하다. 주어진 로그-로그 특성 곡선의 임의 점에서 값을 읽기 위한 보간법을 연구하여 매틀랩 코딩으로 커패시터의 분석 도구로 적용하였다. 커패시터를 간단 화 된 RC 직렬 등가 회로로 가정하고, 등가 직렬 저항 ESL 값을 구하여 주파수 응답 특성 곡선을 재현하는 시뮬레이션을 시도하였다. 실제 무효전력의 피크 치에 대한 특성과 시뮬레이션 특성을 비교할 때 재현율이 83% 이상 결과 값으로 나타나는 것을 확인할 수 있었고, 이 알고리즘은 간단화 된 모델의 커패시터 특성곡선을 분석하여 예측 할 때 적용이 가능하다.

• 한국전기전자재료학회논문지
• /
• 제20권5호
• /
• pp.425-429
• /
• 2007

A linear ultrasonic motor was designed by a combination of the longitudinal and bending mode. linear ultrasonic motors are based on an elliptical motion on the surface of elastic body, such as bar or plates. The corresponding eigen-mode of one resonance frequency can be excited twice at the same time with a phase shift of 90 degrees in space and time. That is excite symmetric and anti-symmetric modes. Then it determines the thrust and speed of the motor. Linear ultrasonic motors are investigated experimentally in according to be fabricated a general classification to motor structure and material characteristic. There was the first to simulate as use of finite element analysis ANSYS 9.0. The AL-T2W8-ARM14-LEG18-ANGLE80 motor has a maxim efficiency 18 % under the speed 0.14 m/s, thrust 345 gf and preload 280 gf, operating frequency is 57.6 kHz.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.699-705
• /
• 2013

This paper presents vibration testing, control, and finite element analysis of a piping system, which is subjected to the changes in fluid levels. Nuclear power plants typically employ a cooling system that uses sea water. These systems are subjected to dynamic characteristic changes caused by sea-level variations, which introduces failures of cooling system components. Therefore in this study, analytical and experimental studies were performed to understand the effect of sea-level changes on the dynamic characteristics of piping systems. It was shown that, as the sea-level increases, pipe's natural frequencies decreases in relation to its mode shape. A 1/14 scale model was also built to compare the results obtained by the analytical study. A good agreement between experiment and analytical studies were observed. Finally, an on-line resonant frequency identification system was proposed and developed, which utilizes piezoelectric transducers as sensors and actuators, in order to avoid catastrophic failure of piping systems.

• 비파괴검사학회지
• /
• 제30권2호
• /
• pp.132-138
• /
• 2010

본 연구에서는 접촉역학 특성에 의한 캔틸레버 탑의 접촉-진동을 연구하고 나노스케일의 표면에서 탄성특성을 이미지화 하였다. 스프링-질량 모텔과 Herzian 이론을 이용하여 접촉공진주파수를 이론적으로 계산하고 초음파원자현미경을 이용하여 캔틸레버의 자유공진주파수와 접촉공진주파수의 변화를 분석하였다. 또한, 프로토타입의 초음파원자현미경을 이용하여 구상화 열처리된 시험편의 탄성 이미지를 위상과 진폭 신호를 이용하여 성공적으로 얻을 수 었었다.

• 전기학회논문지
• /
• 제63권12호
• /
• pp.1759-1763
• /
• 2014

In this paper, we were performed a structural analysis and durability analysis for an integral frame with an axle according to development of the electric locomotive traction motor. In terms of the structural stability, as a result of the analysis modeling with coupling conditions of beam element and an alternative element of three-dimensional, the maximum von-Mises stress of the locking screw mounting frame were similar as 50MPa and 51MPa. Also A comparison of the natural frequency and the exciting frequency while driving of the electric locomotive No. 8200, the natural frequency is 627.05Hz~856.9Hz while the exciting frequency is not more than most 30Hz or 553Hz, 1110Hz. Therefore, it is possible to avoid the resonance.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권2호
• /
• pp.37-41
• /
• 2016

This paper presents the developed quench analysis code and protection circuit design for a superconducting magnet system of 28GHz electron cyclotron resonance (ECR) ion source. The superconducting magnet is composed of a hexapole magnet and four solenoid magnets located outside of the hexapole one. All magnets are wound with NbTi composite wire and impregnated by epoxy. By using the developed characteristic analysis code, the normal zone resistance, decaying current and temperature rising can be estimated during quench. Also, the stored magnetic energy is successfully consumed from the series resistor of the designed protection circuit. The analytical results are compared with the experimental results to verify the developed quench analysis code and protection circuit.