• 한국멀티미디어학회논문지
• /
• 제23권8호
• /
• pp.1040-1048
• /
• 2020

In this study, in order to improve the implantable bone conduction transducer of the prototype proposed by Shin et al., the effect of the element parameters of the transducer on the frequency characteristics was analyzed using electromagnetic and mechanical vibration analysis. Electromagnetic analysis was performed on the size of the permanent magnet and the distance between the metal plate and the coil to derive an optimal structure that generates the maximum Lorentz force. In addition, mechanical vibration analysis was performed on the cantilever structure of the vibrational membrane in order to minimize the distortion of the transducer and to have a frequency characteristic suitable for conductive hearing loss compensation. The frequency characteristics of the transducer of the optimal structure derived through finite element method were compared with the simulation results of the previous transducer. As a result, the output magnitude (displacement) of the transducer designed with the optimal structure generated an average 8.8 times higher than the previous transducer, and the resonance frequency was generated at 0.9 kHz.

• 한국콘텐츠학회논문지
• /
• 제5권5호
• /
• pp.296-304
• /
• 2005

고양이 뇌 지방색전증을 유발한 후 자기공명 관류영상기법을 이용하여 대뇌혈류량을 정량적으로 분석하고 동적특성 변화를 구현 할 수 있는 기법을 제안한다. 고양이 20마리를 대상으로 한쪽 내경동맥에 리노레익 (n=11)을 주입하여 뇌 지방색전을 유발시켰고, 대조군으로는 이바론 입자 (n=9)를 주입하여 색전이 유발되게 하였다. 그 후 30분과 2시간에 각각 T2강조, 확산강조영상을 획득하고 가장 색전이 많이 일어난 부위에서 관류강조영상을 획득하였다. 획득한 데이터는 IDL 소프트웨어와 자체 개발한 영상처리 알고리즘을 이용하여 신호강도 곡선을 ${\Delta}R_2^*$ 곡선으로 변환한 후 적분하여 뇌혈류량을 측정하였다. 실험군에서 병변부위의 뇌혈류량은 정상부위에 비해 감소하였으며, 뇌혈류량 비는 시간경과에 따라 유의한 차이가 있었다 (P<0.005). 뇌 지방색전증의 초기에는 혈류량이 감소하였으나, 2시간에서는 30분에 비해 뇌혈류량이 다소 증가됨을 관찰 할 수 있었다. 뇌경색 발생시 조기에 자기공명확산 및 관류강조영상을 획득하여 개발한 영상처리 알고리즘을 적용하여 뇌 혈류량의 다양한 동적변화 특성 및 혈류역학적 변화를 상대적 관류도 맵으로 얻을 수 있었다.

• 센서학회지
• /
• 제8권5호
• /
• pp.407-413
• /
• 1999

유전체 원주 공진기의 공진주파수는 대칭성을 이용한 전기벽과 자기벽 개념을 도입해서 매우 정확하게 계산할 수 있으나, 유전체 공진기를 지지하기 위한 지지대의 존재 및 지지대의 유전율 등의 영향으로 인하여 유전체 원주 공진기의 구성이 실제로는 비대칭성을 가지므로, 비대칭 유전체공진기의 공진특성을 조사할 필요가 있다. 본 논문에서는 고유함수 전개법을 이용하여 도체 공동 내에 비대칭적으로 위치한 유전체 원주 공진기의 공진특성을 추출하는 관계식을 유도하고 공진주파수를 계산하였다. 실험을 통하여 계산된 공진주파수가 정확함을 확인하였고, 비대칭성이 있는 경우 TE 모드나 하이브리드 모드의 경우보다 TM 모드에 있어서 그 영향이 더 큼을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제14권5호
• /
• pp.561-567
• /
• 1993

The twelve macrocycle (L) complexes of cadmium(II) nitrate have been synthesized: $CdL(NO_3)_2$. All the complexes have been indentified by elemental analysis, electric conductivity measurements, IR and NMR spectroscopic techniques. The molar electric conductivities of the complexes in water and acetonitrile solvent were in the range of 236.8-296.1 $cm^2{\cdot}mol^{-1}{\cdot}ohm^{-1}$ at 25$^{\circ}$C. The characteristic peaks of macrocycles affected from Cd(II) were shifted to lower frequencies as compared with uncomplexed macrocycles. A complex with 1,4,8,11-tetrakis(methylacetato)-1,4,8,11-tetraaza cyclodecane (L4) exhibited two characteristic bands such as strong stretching (1646 $cm^{-1})$, and weaker symmetric stretching band (1384 $cm^{-1})$. NMR studies indicated that all nitrogen donor atoms of macrocycles have greater affinity to cadmium(II) metal ion than do the oxygen atoms. The $^{13}$C-resonance lines of methylene groups neighboring the donor atom such as N and S were shifted to a direction of high magnetic field and the order of chemical shifts were $L_1 < L_2 < L_3 < L_6 < L_4$. Also the chemical shifts values were larger than those of methylene groups bridgeheaded in side-armed groups. This result seems due to not only the strong interaction of Cd(Ⅱ) with nitrogen donors according to the HSAB theory, but weak interaction of Cd(Ⅱ) and COO- ions or sulfur which is enhanced by the flexible methylene spacing group in side-armed groups. Thus, each additional gem-methyl pairs of L_3, L_4\;and\; L_6$ macrocycles relative to $L_1, L_2,\;and\;L_5$ leads to an large enhancement in Cd(II) affinity. ^{13}C$-NMR spectrum of the complex with $L_{12}$ (1,5,9,13-tetracyclothiacyclohexadecane-3,11-diol) reveals the presence of two sets of three resonance lines, and intensities of the each resonance line have the ratio of 1 : 2 : 2. This molecular conformation is predicted as structure of tetragonal complex to be formed by coordinating two sulfur atoms and the other two sulfur atoms which is affected by OH-groups.

• 한국소음진동공학회논문집
• /
• 제19권3호
• /
• pp.301-312
• /
• 2009

This paper presents a theoretical approach to calculate the resonant frequency of a thickness vibration mode in the radial direction for a 1-3 piezoelectric composite transducer of circular arch shape. For the composite transducer composed of a piezoelectric ceramic and a polymer, vibration parameters were derived according to the volume ratio of a ceramic, and a vibration characteristic equation was derived from the piezoelectric governing equations with adequate boundary conditions. The fundamental resonant frequencies were calculated numerically and verified by comparing them with those obtained from the finite element analysis and the experiment. The volume ratio and the thickness are more substantial than the curvature radius to determine the fundamental resonant characteristics, and the fundamental resonant frequency becomes higher for the larger volume ratio of the piezoelectric ceramic and for the smaller thickness.

• 한국소음진동공학회논문집
• /
• 제16권1호
• /
• pp.89-100
• /
• 2006

This paper presents an analytical approach to describe the variation in the vibration characteristics such as the natural frequency of a piezoelectric transducer under static pre-pressure. The transducer considered in this paper is a bolt-clamped Langevin-type transducer, which consists of a couple of piezoelectric discs, a couple of metal blocks for added mass effect, and a bolt to tighten them. A new analysis model for the transducer has been developed by taking into account the contact area between the piezoelectric ceramic disc and the metal block. The variation of the resonance frequency due to the pre-pressure has been calculated and compared with measured results reported earlier.

• 대한치과보철학회지
• /
• 제41권2호
• /
• pp.182-206
• /
• 2003

Statement of problem : Successful osseointegration of endosseous threaded implants is dependent on many factors. These may include the surface characteristics and gross geometry of implants, the quality and quantity of bone where implants are placed, and the magnitude and direction of stress in functional occlusion. Therefore clinical quantitative measurement of primary stability at placement and functional state of implant may play a role in prediction of possible clinical symptoms and the renovation of implant geometry, types and surface characteristic according to each patients conditions. Ultimately, it may increase success rate of implants. Purpose : Many available non-invasive techniques used for the clinical measurement of implant stability and osseointegration include percussion, radiography, the $Periotest^{(R)}$, Dental Fine $Tester^{(R)}$ and so on. There is, however, relatively little research undertaken to standardize quantitative measurement of stability of implant and osseointegration due to the various clinical applications performed by each individual operator. Therefore, in order to develop non-invasive experimental method to measure stability of implant quantitatively, the resonance frequency analyzer to measure the natural frequency of specific substance was developed in the procedure of this study. Material & method : To test the stability of the resonance frequency analyzer developed in this study, following methods and materials were used : 1) In-vitro study: the implant was placed in both epoxy resin of which physical properties are similar to the bone stiffness of human and fresh cow rib bone specimen. Then the resonance frequency values of them were measured and analyzed. In an attempt to test the reliability of the data gathered with the resonance frequency analyzer, comparative analysis with the data from the Periotest was conducted. 2) In-vivo study: the implants were inserted into the tibiae of 10 New Zealand rabbits and the resonance frequency value of them with connected abutments at healing time are measured immediately after insertion and gauged every 4 weeks for 16 weeks. Results : Results from these studies were such as follows : The same length implants placed in Hot Melt showed the repetitive resonance frequency values. As the length of abutment increased, the resonance frequency value changed significantly (p<0.01). As the thickness of transducer increased in order of 0.5, 1.0 and 2.0 mm, the resonance frequency value significantly increased (p<0.05). The implants placed in PL-2 and epoxy resin with different exposure degree resulted in the increase of resonance frequency value as the exposure degree of implants and the length of abutment decreased. In comparative experiment based on physical properties, as the thickness of transducer increased, the resonance frequency value increased significantly(p<0.01). As the stiffness of substances where implants were placed increased, and the effective length of implants decreased, the resonance frequencies value increased significantly (p<0.05). In the experiment with cow rib bone specimen, the increase of the length of abutment resulted in significant difference between the results from resonance frequency analyzer and the $Periotest^{(R)}$. There was no difference with significant meaning in the comparison based on the direction of measurement between the resonance frequency value and the $Periotest^{(R)}$ value (p<0.05). In-vivo experiment resulted in repetitive patternes of resonance frequency. As the time elapsed, the resonance frequency value increased significantly with the exception of 4th and 8th week (p<0.05). Conclusion : The development of resonance frequency analyzer is an attempt to standardize the quantitative measurement of stability of implant and osseointegration and compensate for the reliability of data from other non-invasive measuring devices It is considered that further research is needed to improve the efficiency of clinical application of resonance frequency analyzer. In addition, further investigation is warranted on the standardized quantitative analysis of the stability of implant.

• 수산해양기술연구
• /
• 제27권3호
• /
• pp.193-210
• /
• 1991

For the deckhouse or superstructure, attention is directed to the reduction of vibration from a human susceptibility point of view. The two basic requirements for obtaining a low vibration level in the accommodation are to ensure that excitation forces from propeller and/or main engine are small and to avoid resonance excitation of the hull and superstructure. In recent years increased attention has been directed towards the problems of vibration and noise in deckhouse, which have caused major problems with regard to the environmental quality in the living quarters for crews. Accordingly, in this paper, the characteristic of the vibration of deckhouse of fishing boat, of which the length/height ratio is also relatively high, are studied systematically with regard to the shape and modelling of deckhouse based on finite element method of 1-dimensional, 2-dimensional and 3-dimensional model. This study is divided into 4-part. 1st part is the global deckhouse vibration, 2nd part is the local deckhouse vibration, 3rd part consists of the estimation for stiffness of foundational support and 4th part is the application to TUNA LONG LINER of 416 ton class. For the global vibration analysis, the severity of the vibration depends on the longitudinal shear and bending stiffness of the deckhouse, on the vertical deckhouse support(fore, aft and sides). However, even if the design is technically sound, vibration problems may arise due to vertical or longitudinal hull girder or afterbody resonances. Author applied the method of this study to the analysis of, deep-sea fishing vessel of G.T. 416 ton class with relatively low height and long deckhouse, and investigated the vibrational characteristic of the fishing vessel with earlier structural feature. According to this investigation, the vibration, response of above vessel was confirmed of which main hull and deckhouse behave as one body. It is at the bottom of vibrational trouble which a accommodation part of the fishing vessel is raised, that is the local vibration for side wall, fore-aft wall and deck plate of deckhouse rather than thief fect of fore-aft vibration of deckhouse for above fishing vessel. and the resonance of main hull, deckhouse and driving system such as the main engine, propeller in exciting source is mainly brought up as the trouble.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.764-769
• /
• 2007

This paper is studied the noise and vibration characteristics analysis of the three-phase induction AC motor of the electrical forklift. And we suggest the method which the reduction orders the noise and vibration to be the mechanical. In other to investigate these characteristics, we considered the mechanical characteristics, the electromagnetic effects, and these interactions. In mechanical, we studied the characteristic of the stator, the bearing supported condition of the rotor, and the sound radiation. In electronically, this paper is considered the harmonic effect which is related the magnetic motive force (mmf) with respect to the characteristic of the slot number of the rotor and the stator and the pole number of the motor. Finally we investigated the overall noise and vibration of the induction motor by relations between the electronically harmonic and the mechanical resonance of the stator. By the analysis of the generally three-phase induction motor, we suggest the design methodology to low noise and vibration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.15-15
• /
• 2015

본 논문은 무선전력전송을 위한 자기공진코일의 최적 설계에 관한 내용이다. 공진코일의 턴수, 공진코일 사이의 거리, 코일을 형성하는 도선의 두께, 공진코일의 구조에 따라 공진시스템의 공진주파수와 전송효율 등의 공진특성에 영향을 준다. 이때 소스코일과 수신코일은 턴수가 1인 단일원형루프코일을 사용한다. 공진시스템의 공진특성은 상용툴인 HFSS를 이용한 시뮬레이션으로 분석하였고, 측정을 통해 성능을 검중하였다.