• Journal of Magnetics
• /
• 제4권2호
• /
• pp.65-68
• /
• 1999

The M-type barium ferrite ($BaFe_{12}O_{19}$) is well known magnetic material to be used as a permanent magnet due to its strong uniaxial anisotropy. The substitution of nonmagnetic $Ti^{+4}$ and magnetically weak $Co+^2ion for Fe^{+3}$ to its strong uniaxial anisotropy. The substitution of nonmagnetic $Ti^{+4}$ and magnetically weak $Co+^2ion for Fe^{+3}$ sublattices reduces the uniaxial anisotropy and those compounds open a new application field of noise suppressor at high frequencies. In this study, the magnetic and microwave absorbing properties are investigated in Ti-and Co-substituted barium ferrites ($BaFe_{12-2X} Ti_XCo_XO_{19}$). The saturated magnetization decreases linearly with the substitution of Ti and Co. The rapid drop in coercive force is observed with Ti and Co substitution upto x=1.2. The magnetic permeability spectrum shows the natural magnetic resonance in the specimens with small coercive force and large attenuation of microwave is predicted in those specimens at high frequencies (above 4 GHz).

• 대한의용생체공학회:의공학회지
• /
• 제18권2호
• /
• pp.173-178
• /
• 1997

pH sensitive polymers have long been utilized as one important type among many interesting drug delivery systems. This is due to the reason of different pH environments in human organs, which requires different pH control mechanism depending upon the organs. In the present study the pH sensitivity was investigated for both pH sensitive and pH insensitive biopolymers using the diffusion effect along with the swelling effect. NMR microscopy was performed along with optical microscopy. For the analysis of diffusion effect, UMR Microscopy was perFormed to measure diffusion coefficients for various liquids such as distilled water, acetone and DMSO(dimethyl sulfoxide). Also, this technique is expected to contribute to the studies for many pH drug delivery systems.

• Environmental Analysis Health and Toxicology
• /
• 제11권1_2호
• /
• pp.49-57
• /
• 1996

The production of reactive oxygen species on addition of hexavalent chromium (potassium dichromate, $K_2Cr_2O_7$ ) to lung cells in culture was studied using flow cytometer analysis. A Coulter Epics Profile flow cytometer was used to detect the formation of reactive oxygen species after $K_2Cr_2O_7$ was added to A549 cells grown to confluence. The cells were loaded with the dye, 2',7'-dichlorofluorescein diacetate, after which cellular esterases removed the acetate groups and the dye was trapped intracellularly. Reactive oxygen species oxidized the dye, with resultant fluorescence. Increased doses of Cr(VI) caused increasing fluorescence (10-fold higher than background at 200 gM). Addition of Cr(III) compounds, as the picolinate or chloride, caused no increased fluorescence. Electron paramagnetic resonance (EPR) spectroscopic studies indicated that three (as yet unidentified) spectral "signals" of the free radical type were formed on addition of 20, 50, 100 and 200 gM Cr(VI) to the A549 cells in suspension. Two other EPR 'signals" with the characteristics of Cr(V) entities were seen at field values lower than the standard free radical value. radical value.

• Bulletin of the Korean Chemical Society
• /
• 제27권4호
• /
• pp.489-494
• /
• 2006

Goethite, hematite, magnetite and synthesized iron oxide are used as catalysts for Fenton-type oxidation of phenol. The synthesized iron oxides were characterized by X-ray diffraction (XRD), BET, X-ray photoelectron spectroscopy (XPS), and electron paramagnetic resonance (EPR). The catalytic activity of these materials is classified according to the observed rate of phenol oxidation. The effectiveness of the catalysts followed the sequence: ferrous ion > synthesized iron oxide >> magnetite hematite > goethite. According to these results, the most effective iron oxide catalyst had the structure similar to natural hematite. The surface oxidation state of the catalyst was between magnetite and hematite (+2.5 ~ +3.0). Phenol degraded completely in 40 min at neutral pH (pH = 7). Soluble ferric and ferrous ions were not detected in the filtrate from Fenton reaction solution by AAS. The formation of hydroxyl radicals was confirmed by EPR.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.235-238
• /
• 2009

BaMg$Al_{10}O_{17}$ (BAM) co-doped with $Eu^{2+}$ and $Mn^{2+}$ was synthesized in a solid-state reaction and their luminescence properties were investigated as functions of the concentrations of the sensitizer and activator. BAM:$Eu^{2+}$ had a broad blue emission band at 450 nm and BAM:$Mn^{2+}$ exhibited green emission at 514 nm. The energy transfer from $Eu^{2+}$ to $Mn^{2+}$ was mainly of the resonance-type via an electric dipole-quadrupole interaction. Additionally, the addition of various fluxes such as $AlF_3$ and $BaF_2$ in the synthesis improves the moist and thermal stability. This is particularly important for the phosphor in white light emitting diodes (LEDs).

• Journal of Information Display
• /
• 제2권4호
• /
• pp.63-67
• /
• 2001

The switching power loss due to the panel capacitance during sustain period in AC PDP driving system can be minimized by using the energy recovery circuits. We proposed a new energy recovery circuit, SER1 (Seoul national univ. Energy Recovery circuit 1st). The experimental results of its application to a 42-inch surface discharge type AC PDP showed superior performance of SER1 in energy recovery efficiency and low distortion voltage waveform. Energy recovery efficiency of SER1 was measured up to 92.3 %, and the power dissipation during the sustain period was reduced by 15.2 W in 2000 pulse/frame compared with serial LC resonance energy recovery circuit.

• 한국기계가공학회지
• /
• 제13권6호
• /
• pp.134-138
• /
• 2014

Power packs can change energy to hydraulic energy generated by an engine as a tool for use with civil engineering construction equipment. This paper determines which type of power pack meets the standards of construction machinery. A power pack was formulated as a three-dimensional model by using the software CATIA. A modal analysis was conducted using ANSYS Workbench, and the resonance was checked. Next, a harmonic analysis was conducted. The analytical results show that the dynamic stability of the power pack is assured.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2002년도 제7차 학술대회 초록집
• /
• pp.83-83
• /
• 2002

목적： 현재 임상적으로 사용되고 있는 확산경사자장의 세기 이상( > 1200)의 강한 확산 경사자장이 가해진 경우 뇌구조물들의 확산계수값을 조사하고 고자장(Bo = 3T)에서 이러한 강한 확산 경사자장을 이용하는 경우 1.5T에서 시행하는 경우와의 차이점을 비교 연구해보고자 하였다. 대상 및 방법： 정상 성인 3명을 대상으로 b-value를 0부터 3500까지 변화시키며 확산강조영상을 최대경사자장 40 mT/m, slew rate 150 T/m/s의 경사자장계가 장착된 3T MR scanner (General Electric, USA)에서 획득하였다. 사용한 펄스열은 Stejskal-Tanner type의 확산강조 경사자장이 포함된 single-shot SE EPI를 사용하였으며 영상획득시 사용한 파라미터는 다음과 같다. TR/TE= 10000/95.1, Thickness/space=512mm, FOV=24$\times$21cm, Matrix=128$\times$128, NEX=1 뇌구조물들에 관심 영역을 설정하고 b-value에 따른 신호감소를 측정하였다. 측정된 데이터를 hi-exponential decay 모델을 이용하여 분석하였다.

• 한국자기학회지
• /
• 제11권3호
• /
• pp.109-113
• /
• 2001

Presently, an inductor adapted at MMIC (Monolithic Microwave Integrated Circuit) which is used for cellular phone or PHS operates at quasi-microwave range over 800 MHz. However, a W-CDMA (Wideband Code Division Multiple Access) will use about 2 GHz range. Therefore magnetic film device should be compatible up to 2 GHz. We have deposited Co-Pd-Al-O system film using rf sputtering method which is expected up to 2 GHz, and investigated the effect of Pd content and magnetic field annealing. When Pd composition is 19%, Hk was 118 Oe, and ${\mu}$′showed flat frequency characteristics up to 1.5 GHz. The Q factor (=${\mu}$′/${\mu}$") was 23.3 at 1 GHz, 6.7 at 1.5 GHz and 1.5 at 2 GHz, respectively. Resonance frequency was 2 GHz. Therefore Co-Pd-Al-O thin film could be used at over 1 GHz, and also expected as an inductor material for wide band CDMA type cellular phone.

• 전자공학회논문지SC
• /
• 제47권1호
• /
• pp.62-66
• /
• 2010

순수한 수동소자들을 사용하여 영전류 영전압에서 소프트하게 스위칭 동작하는 펄스 폭 변조 의사 공진 컨버터를 소개한다. 사용된 수동 소자망은 폴딩 스너버망의 변형된 형태로 컨버터의 주 정류 다이오드의 역 복귀 전류를 제거시켜 주고 스위칭 소자 MOSFET를 소프트하게 스위칭 시킨다. 효율도 능동 스너버형과 비슷한 수준이고 회로 구성이 간단하여 구현하기 쉬우며 중 출력(수 KW이하) 정전압 공급원에 적합하다.