• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.778-787
• /
• 2014

This study presents an input filter resonance mitigation method for an AC-DC matrix converter. This method combines the advantages of the one-cycle control strategy and the active damping technique. Unnecessary sensors are removed, and system cost is reduced by employing the grid-side input currents as feedback to damp out LC resonance. A model that includes the proposed method and the input filter is established with consideration of the delay caused by the actual controller. A zero-pole map is employed to analyze model stability and to investigate virtual resistor parameter design principles. Based on a double closed-loop control scheme, the one-cycle control strategy does not require any complex modulation index control. Thus, this strategy can be more easily implemented than traditional space vector-based methods. Experimental results demonstrate the veracity of theoretical analysis and the feasibility of the proposed approach.

• Journal of Electrical Engineering and Technology
• /
• 제6권6호
• /
• pp.849-852
• /
• 2011

This paper investigates a method to tackle the resonance problems of the rectangular power-bus structure(PBS) using thin sheets loaded with periodic metal strips. The equivalent surface impedance of the proposed loading is calculated and involved in the expression of the impedance that accounts for in the PBS, in order to improve the resonance behavior of the original structure. The effects of the strips and the immediate surroundings are illustrated by a number of numerical experiments. Also the restrictions of the technique are addressed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.955-958
• /
• 2005

In this study, the wind load characteristics for a transmission tower is investigated considering the effect of the transmission lines through stochastic analysis. The assemblage of the transmission line and insulator are modeled as a double pendulum system connected to the SDOF model of the tower It is observed that the background component of the overturing moment induced by the wind response of the transmission line has considerable portion in the total overturning moment. Based on this result, a rotational viscoelastic damper (VED) is proposed for the mitigation of the transmission line reactions, which act as wind load transferred to the tower. To verify the effectiveness of the proposed strategy, time history analysis is conducted for different wind velocities and VED damping constants. From the analysis, the proposed VED is proved to be effective for mitigation of the background component rather than the resonance component of the transmission line reaction.

• 한국항해항만학회지
• /
• 제35권9호
• /
• pp.755-763
• /
• 2011

Recently, extreme tsunami waves generated by submarine earthquake have caused tremendous damages to the coastal cities and ports. Strong seiche oscillations and runups are observed in specific sea areas around the world. Although no frequent impacts to the coast of Korean peninsula, there exist some important events in the east of Korea in the past. This study focuses on two historical events and recalculate with different fault and rupture mechanism for prediction considering the recent trend of submarine earthquake. The present study of the 1983 Akita tsunamis demonstrates the multi-scale resonance along continental coasts. Together with the Nankai tsunami for inland sea, we have confirmed the inland sea resonance surrounded by islands in defining the impact along the coast. Coherence and wavelet analyses for deducing a predominant period and time frequency are useful in reasoning the inundation. The resonance modes, which are largely independent of the tsunami source, allow identification of at-risk communities and infrastructure for mitigation of tsunami hazards. Furthermore, understanding of the resonance and the predicted runups for the site of power plant and industrial complex in the east coast of Korea would allow better preparation for the future disasters.

• Wind and Structures
• /
• 제23권2호
• /
• pp.91-107
• /
• 2016

Flow-excited acoustic resonance in ducted cavities can produce high levels of acoustic pressure that may lead to severe damage. This occurs when the flow instability over the cavity mouth, which is created by the free shear layer separation at the upstream edge, is coupled with one of the acoustic modes in the accommodating enclosure. Acoustic resonance can cause high amplitude fluctuating acoustic loads in and near the cavity. Such acoustic loads could cause damage in sensitive applications such as aircraft weapon bays. Therefore, the suppression and mitigation of these resonances are very important. Much of the work done in the past focused on the fluid-dynamic oscillation mechanism or suppressing the resonance by altering the edge condition at the shear layer separation. However, the effect of the downstream edge has received much less attention. This paper considers the effect of the impingement edge geometry on the acoustic resonance excitation and Strouhal number values of the flow instabilities in a ducted shallow cavity with an aspect ratio of 1.0. Several edges, including chamfered edges with different angles and round edges with different radii, were investigated. In addition, some downstream edges that have never been studied before, such as saw-tooth edges, spanwise cylinders, higher and lower steps, and straight and delta spoilers, are investigated. The experiments are conducted in an open-loop wind tunnel that can generate flows with a Mach number up to 0.45. The study shows that when some edge geometries, such as lower steps, chamfered, round, and saw-tooth edges, are installed downstream, they demonstrate a promising reduction in the acoustic resonance. On the other hand, higher steps and straight spoilers resulted in intensifying the acoustic resonance. In addition, the effect of edge geometry on the Strouhal number is presented.

• 한국소음진동공학회논문집
• /
• 제16권4호
• /
• pp.420-427
• /
• 2006

In this study, wind loads transmitted to a transmission tower from transmission lines are mitigated using rotational viscoelastic dampers. First, the wind load characteristics in a transmission tower is investigated considering the effect of the transmission lines through stochastic analysis. The assemblage of the transmission line and insulator are modeled as a double pendulum system connected to the SDOF model of the tower. From the result of the stochastic analysis, the background component of the overturing moment caused by the wind loads acting on the transmission lines are found to have considerable portion in the total overturning moment. Based on this observation result, a strategy Installing rotational viscoelastic damper (VED) between tower arm and transmission line is proposed for the mitigation of the transmission line reactions, which play a role as dynamic loads on a transmission tower. For the purpose of verification, time history analysis is conducted for different wind velocities and VED parameters. The analysis result shows that the rotational VED is effective for the mitigation of the background component rather than the resonance component of the transmission line reactions and achieves the reduction ratio of 50% even for higher wind speed.

• Journal of electromagnetic engineering and science
• /
• 제7권1호
• /
• pp.7-11
• /
• 2007

PCB Power-Bus (comprising power/ground planes) impedance and fields are evaluated by an efficient series expansion method that is suggested in this paper. It is used to investigate the structure's radiated emission(RE) levels and find acceptable ways of loading the power/ground planes such as decoupling capcitor(DeCap)s, balanced feeding and slits, in order to reduce the interferences. Also, the calculations and measurements of a proposed geometry are verified by vector fitting as a analysis model to check the behavior of the slit.

• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.569-579
• /
• 2019

A robust controller is designed based on feedback linearization and sliding mode control to damp sub-synchronous control interaction (SSCI) in doubly fed induction generator (DFIG) wind power plants (WPPs) interfaced with the grid. A feedback-linearized sliding mode controller (FLSMC) is developed for the rotor-side converter (RSC) through feedback linearization, design of the sliding mode controller, and parameter tuning with the use of particle swarm optimization. A series-compensated 100-MW DFIG WPP is adopted in simulation to evaluate the effectiveness of the designed FLSMC at different compensation degrees and wind speeds. The performance of the designed controller in damping SSCI is compared with proportional-integral controller and conventional sub-synchronous resonance damping controller. Besides the better damping capability, the proposed FLSMC enhances robustness of the system under parameter variations.

• 한국방재학회 논문집
• /
• 제9권1호
• /
• pp.65-71
• /
• 2009

본 연구에서는 기존의 25 m 지간을 갖는 PSC I형 단순 철도교에 대해 고속 및 일반 열차하중으로 인한 동적거동을 분석하여 철도교량의 동적사용성을 평가하였다. 고유진동수는 8Hz 대역으로 평가되어 철도교량의 적정 고유진동수 범위 내에 들어있으며, 공진발생 가능성은 없는 것으로 나타났다. 가속도 응답은 무궁화호 열차 주행 시 제한 값 0.35 g를 초과하는 0.43 g가계측되었다. 또한 단부꺽임각은 고속철도의 설계기준을 만족하지 못하였으며 충격계수와 처짐은 모두 설계기준을 만족하였다. 결과적으로 25 m 지간을 갖는 PSC I형 단순 철도교의 경우 다양한 열차하중에 대하여 동적사용성을 부분적으로 확보하고 있는 것으로 나타났으나 진동가속도 응답을 감소시키기 위한 대책이 필요할 것으로 판단된다.

• 한국방재학회 논문집
• /
• 제11권3호
• /
• pp.91-96
• /
• 2011

지하매설물은 국가기간시설물로서 설계, 시공 및 유지관리가 적정하게 이루어져야 한다. 이러한 지하매설물 파손의 주요 원인 중의 하나는 부적절한 뒤채움재의 시공이다. 부적절한 뒤채움재 시공은 특히, 원형관로의 시공시 발생하며, 부적절한 다짐으로 인한 침하 및 내구성저하로 인한 파손이 발생한다. 이러한 문제를 해결할 수 있는 하나의 대안으로 유동성뒤채움재를 이용할 수 있다. 유동성뒤채움재는 초기유동성, 시간에 따른 자기강도발현, 무다짐공법 적용 등 많은 장점을 가지고 있다. 본 연구에서는 현장발생토사, 정수장슬러지 및 폐타이어분말 등 재활용 재료를 이용한 유동성 뒤채움재의 기본물성을 평가하였다. 각각의 재활용재료에 대한 입도 및 비중을 평가하였고, 최적배합설계를 결정하였다. 지반 및 도로공학적 설계입력변수 결정을 위해 일축압축시험, 삼축압축시험, 공진주시험 등을 수행하였다.