• 한국산업융합학회 논문집
• /
• 제4권2호
• /
• pp.133-139
• /
• 2001

The nonlinear response statistics of an spring-pendulum system with internal resonance under narrow band random excitation is investigated analytically- The center frequency of the filtered excitation is selected to be close to natural frequency of directly excited spring mode. The Fokker-Planck equations is used to generate a general first-order differential equation in the dynamic moment of response coordinates. By means of the Gaussian closure method the dynamic moment equations for the random responses of the system are reduced to a system of autonomous ordinary differential equations. The nonlinear phenomena, such as jump and multiple solutions, under narrow band random excitation were found by Gaussian closure method.

• 전기학회논문지
• /
• 제57권11호
• /
• pp.1981-1987
• /
• 2008

This paper proposed one of various acoustic resonance reduction technique for three kinds of ceramic lamps (CDM-150, HCI-150, CMH-150). To reduce the acoustic resonance in the HID lamps, the researched results showed that the frequency modulated signal with the triangle waveform is very effective in order to drive th LCC type half-bridge inverter for HID lamp. Experimental results proved that the acoustic resonance could be rejected, if the adequate switching frequency band is selected and the driving signal frequency is modulated with a triangle waveform.

• Journal of electromagnetic engineering and science
• /
• 제3권1호
• /
• pp.23-28
• /
• 2003

In this paper, a triple-band planar antenna is proposed for the application to miniaturized automobile safety devices operating at X band(10.5 ㎓), K band(24.15 ㎓), and Ka band(34.3 ㎓). The frequency ratio between the resonant frequencies of this antenna can be adjusted from 1.99 to 2.23 for both X band and K band by varying its slit length. Parasitic elements are added on the modified slot loaded antenna to obtain the third resonance. From numerical as well as experimental results, it has been confirmed that this type of antenna is appropriate for planar multi-band antenna systems.

• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.975-982
• /
• 2004

Helmholtz resonator is used to reduce noise of the narrow frequency band. It has high transmission loss at its resonance frequency. The silencer that combines many resonators could control broadband noise at low frequency. To convey this rather simple idea, serial and parallel arrangement of resonators have been tested to obtain high transmission loss characteristics in the band of which are selects. Theoretical and experimental results explain these characteristics in the absence of mean flow. The change of acoustic characteristics by the resonance frequencies and resonators arrangement are explained by using the equivalent Impedance analysis that is defined in this paper. It shows that the transmission loss has a maximum value when the separation distance between each resonator is λ/4 of its wavelength.

• 한국군사과학기술학회지
• /
• 제17권1호
• /
• pp.57-63
• /
• 2014

In this paper, we have proposed a wide band antenna for manpack SDR(Software Defined Radio). The proposed antenna consists of feeding post, flexible gooseneck and two radiating elements composed of a upper and lower radiators. The upper radiator has a longer electrical length than the lower radiator in order to operate in the lower frequency. Also, the resonant frequency and impedance characteristics of the antenna can be adjusted independently for two radiators. Therefore, the proposed antenna can be achieved wide impedance bandwidth by the combination of two independent resonance modes. To analyze the characteristics of the antenna in the design process is employed the equivalent circuit theory and EM(Electro-Magnetic) simulation. The measurement results show that the proposed antenna have the sufficient wide bandwidth, above -3.4dBi of the gain and fairly good radiation pattern over the wide bandwidth.

• 대한전자공학회논문지TC
• /
• 제40권11호
• /
• pp.93-98
• /
• 2003

본 논문은 도파관 급전 방법의 인쇄형 사각 루-프 구조를 이용하여 PCS대역 과 IMT2000 주파수 대역의 안테나를 설계 및 제작하였다. 제안된 안테나는 전방향 방사패턴의 특성을 가지며 단일 평판으로 구현할 수 있어 급전방법이 용이하고, 크기가 작으며, 제작이 편리하고 넓은 대역폭을 갖는 안테나이다 안테나의 이득은 2.67〔㏈i〕이며 대역폭은 YSWR(equation omitted)1.5를 기준하여 계산과 측정결과 각각 100㎒(1.68∼2.68〔㎓〕)와 144㎒(1.46∼2.6〔㎓〕)의 대역을 얻었다. 이는 PCS대역(1.75∼l.87〔㎓〕) 과 IMT2000대역 (1.92∼2.17〔㎓〕)을 충족시킬 수 있다.

• 한국자기학회지
• /
• 제27권2호
• /
• pp.49-53
• /
• 2017

THz 대역 전파흡수체를 구현하기 위해 split cut wire(SCW)와 배면 도체로 구성되는 단위 셀 구조를 제안하였다. 배면이 금속으로 단락된 유전체 기판 상에 SCW가 배열된 메타소재에서 SCW의 길이와 폭을 조절하여 THz 대역에서 완전 전파흡수체(5.5~6.0 THz에서 반사손실 -20 dB 이하)의 구현이 가능하였고, 인덕턴스-커패시턴스 (L-C) 공진기 회로이론으로 이를 설명하였다. 길이가 서로 다른 두 개의 SCW를 하나의 단위 셀 안에 같이 배치함으로써 두 개의 흡수 피크를 얻을 수 있었다. SCW 간의 간격이 넓어짐에 따라 두 번째 공진주파수는 거의 변화가 없지만 첫 번째 공진주파수는 저주파로 이동하면서 반사손실 값이 현저히 감소하는 경향이 나타났다.

• 한국멀티미디어학회논문지
• /
• 제25권8호
• /
• pp.1022-1037
• /
• 2022

It is important to develop a transducer that generates uniform output power through frequency control of the HIFU at 4 MHz frequency for the high intensity focused ultrasound (HIFU) skin diseases treatment. In this paper, a 4 MHz frequency band HIFU system for skin disease treatment was designed, manufactured and developed. In HIFU, even for the ultrasonic vibrator in the 4 MHz frequency band, the characteristics of the output power of the HIFU are different depending on the difference in the thickness of the PZT material. Through the development of a system amplifier, the sound output of the HIFU transducer was improved to more than 48 W and uniform output power control was possible. And, it is possible to control the output power even in a frequency band of 4.0 to 4.7 MHz, which is wider than 4.0 MHz, and shows the resonance frequency of the transducer. The maximum output power for each frequency was 49.969 W and the minimum value was 48.018 W. The maximum output power compared to the minimum output power is 49.969 W, which is uniform within 4.1%. It was confirmed that the output power of the HIFU through the amplifier can be uniformly controlled in the 4 MHz frequency band.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권4호
• /
• pp.6-10
• /
• 2018

Low-noise amplifiers in the radio-frequency (RF) band based on the direct current (DC) superconducting quantum interference device (SQUID) can be used for quantum-limited measurements in precision physics experiments. For the prediction of peak-gain frequency of these amplifiers, we need a reliable design formula for the resonance frequency of the microstrip circuit. We improved the formula for the resonance frequency, determined by parameters of the DC SQUID and the input coil, and compared the design values with experimental values. The proposed formula showed much accurate results than the conventional formula. Minor deviation of the experimental results from the theory can be corrected by using the measured geometrical parameters of the input coil line.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.197-200
• /
• 2000

In this paper, we present a novel methodology for a wideband HTS antenna of finite length placed on a dielectric substrate. A methodology used in this work is based on a moment-method techniques with Green function singularity when the field point is in the source triangle. The designed resonance frequency of our HTS antenna is 11.85 GHz. The return loss is -26 dB. The bandwidth obtained is a significant 10.6 %. Experimental measurements for a HTS antenna designed in X-band are shown to agree well with the simulated prediction.