• Journal of computational fluids engineering
• /
• v.13 no.1
• /
• pp.7-13
• /
• 2008

Several high resolution schemes such as OSHER, MUSCL, SMART, GAMMA, WACEB and CUBISTA are comparatively studied with respect to the accurate capturing of fluid interfaces throughout the application to two typical test cases of a translation test and a collapsing water column problem with a return wave. It is accomplished by implementing the high resolution schemes in the in-house CFD code(PowerCFD) for computing 3-D flow with an unstructured cell-centered method and an interface capturing method, which is based on the finite-volume technique and fully conservative. The calculated results show that SMART scheme gives the best performance with respect to accuracy and robustness.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.1
• /
• pp.23-29
• /
• 2008

Two high resolution compressive schemes, CICSAM(Ubbink, 1997) and HRIC(Muzaferija & Peric, 1999), in interface capturing method are reviewed briefly with respect to the extended forms suitable for unstructured meshes. And then those are applied to three typical test cases of translation test, shearing flow test and collapsing water problem with an obstacle. It is accomplished by implementing the high resolution schemes in the in-house CFD code(PowerCFD) for computing 3-D flow with an unstructured cell-centered method, which is based on the finite-volume technique and fully conservative. The calculated results show that CICSAM is better than HRIC with respect to accuracy and robustness, although either scheme can be used as a good choice for free surface or two-phase flow simulation.

• 한국전산유체공학회:학술대회논문집
• /
• 2006.10a
• /
• pp.51-56
• /
• 2006

Several high resolution schemes such as OSHER, MUSCL, SMART, GAMMA, WACEB and CUBISTA are applied to two typical test cases of a translation test and a collapsing water column problem for the accurate capturing of fluid interfaces. It is accomplished by implementing the high resolution schemes in the in-house CFD code(PowerCFD) for computing 3-D flow with an unstructured cell-centered method, which is based on the finite-volume technique and fully conservative. The calculated results are found to show that SMART scheme gives the best performance with respect to accuracy and robustness.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.12
• /
• pp.51-58
• /
• 1991

In this paper, we propose a multiresolution edge detection method which selects the edge detection window size and scale automatically by using the local variance information as an edgeness measure of a region. The mode of the local variance distribution which is calculated over the (2p + 1) x (2p + 1) windows is used to determine the resolution of the given pixel and the edge operator with different scale can be applied to the pixel depending on its resolution. The combination of the resolution determination scheme with the conventional Canny and LOG edge detectors gives the proposed multiresolution edge detection schemes. The effectness of the proposed schemes is shown via computer simulation.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.119.2-119.2
• /
• 2014

Many astrophysical phenomena involve processes of magnetohydrodynamics (MHD) and relativistic magnetohydrodynamics (RMHD). A number of numerical schemes have been developed to solve the equations of ideal MHD and RMHD. Recent codes are based on upwind schemes which solve hyperbolic systems of equations following the characteristics of the systems. Upwind schemes stand out by their robustness, clarity of the underlying physical model, and ability of achieving high resolution. We present MHD and RMHD codes based on the total variation diminishing (TVD) and weighted essentially non-oscillatory (WENO) schemes, which are second and higher order accurate extensions of upwind schemes. We demonstrate the ability and limitation of codes based on upwind schemes through a series of tests.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.19-22
• /
• 1998

Automatic mesh generation procedures applied to industrial now problems lead to complex mesh topologies where usually no special considerations to mesh resolution are taken. In the present study a fast and flexible solution algorithm in combination with generalized higher order discretization schemes is presented and its application to intake port calculation is demonstrated.

• Journal of the Korean earth science society
• /
• v.36 no.6
• /
• pp.553-566
• /
• 2015

The effects of vertical resolutions and planetary boundary layer (PBL) physics schemes in a numerical simulation with a very high resolution over the metropolitan area were investigated. The numerical experiments using the Weather Research and Forecast model were conducted from 0000 UTC 25 October to 0000 UTC 26 October 2013. We verified the numerical results against with six hourly observation data from the radiosonde at Seolleung, which was located in southern part of Seoul, and forty three auto weather systems in Seoul. In the experiments of vertical resolutions in low level atmosphere with 44, 50, and 60 layers, which are set to be subdivided particularly under 2 km height. The experiment in 60 layers, which has the highest vertical resolution in this study, showed relatively a clear diurnal variation of PBL heights. Especially, the difference of PBL heights and 10-meter wind fields were mainly seen in the area of high altitude lands for the experiments of vertical resolution. In the sensitivity experiment of PBL schemes such as asymmetric convective model-version 2 (ACM2), Yonsei University (YSU), and Mellow-Yamada-Janjic (MYJ) to the temperature, all three PBL schemes revealed lower temperature than observed profile from the radiosonde in the entire period. The experiments with YSU PBL and ACM2 PBL schemes show relatively less biased in comparison with the experiment of the MYJ PBL scheme.

• Atmosphere
• /
• v.21 no.4
• /
• pp.391-404
• /
• 2011

This study investigates the impact of cumulus parameterization scheme (CPS) with different horizontal grid sizes on the simulation of the local heavy rainfall case over the Korean Peninsula. The Weather Research and Forecasting (WRF)-based real-time forecast system of the Joint Center for High-impact Weather and Climate Research (JHWC) is used. Three CPSs are used for sensitivity experiments: the BMJ (Betts-Miller-Janjic), GD (Grell-Devenyi ensemble), and KF (Kain-Fritsch) CPSs. The heavy rainfall case selected in this study is characterized by low-level jet and low-level transport of warm and moist air. In 27-km simulations (DM1), simulated precipitation is overestimated in the experiment with BMJ scheme, and it is underestimated with GD scheme. The experiment with KF scheme shows well-developed precipitation cells in the southern and the central region of the Korean Peninsula, which are similar to the observations. All schemes show wet bias and cold bias in the lower troposphere. The simulated rainfall in 27-km horizontal resolution has influence on rainfall forecast in 9-km horizontal resolution, so the statements on 27-km horizontal resolution can be applied to 9-km horizontal resolution. In the sensitivity experiments of CPS for DM3 (3-km resolution), the experiment with BMJ scheme shows better heavy rainfall forecast than the other experiments. The experiments with CPS in 3-km horizontal resolution improve rainfall forecasts compared to the experiments without CPS, especially in rainfall distribution. The experiments with CPS show lower LCL(Lifted Condensation Level) than those without CPS at the maximum rainfall point, and weaker vertical velocity is simulated in the experiments with CPS compared to the experiments without CPS. It means that CPS suppresses convective instability and influences mainly convective rainfall. Consequently, heavy rainfall simulation with BMJ CPS is better than the other CPSs, and even in 3-km horizontal resolution, CPS should be applied to control convective instability. This conclusion can be generalized by conducting more experiments for a variety of cases over the Korean Peninsula.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.807-810
• /
• 2000

In this paper, a new hierarchical motion estimation (ME) scheme using the wavelet transformed multi-resolution image layers is proposed. While the coarse-to-fine (CtF) ME, used in previously proposed coding schemes, can provide a better estimate at the coarsest resolution, it is difficult to accurately track motion at finer resolution. On the other hand, in fine-to-coarse (FtC) ME, it can solves this local minima problem by estimating motion track at the finest subband and propagating the motion vector (MV) to coarser subband. But this method causes to higher computational overhead. This paper proposes a new method for reducing the computational overhead of fine-to-coarse rnulti-resolution motion estimation (MRME) at the finest resolution level by searching for the region to consider motion vectors of the coarsest resolution subband.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.7-12
• /
• 1998

Optimized high-order compact(OHOC) schemes were proposed, which have high spatial order of truncation and resolution to simulate the aeroacoustic problems due to unsteady compressible flows. Generally, numerical schemes are categorized explicit or implicit by time-marching method. In this research, OHOC differences which were developed with explicit time-marching method is used to have implicit formulation and the implicit OHOC differences result in block hepta-diagonal matrix. This paper presents the comparisons between the explicit and implicit OHOC schemes with a second order accuracy of time in the 1-d linear wave convection problem, and between the explicit OHOC scheme of 4th-order accuracy in time and the implicit OHOC scheme of 1st-order accuracy in tine for the 1-d nonlinear wave convection problem. With these comparisons, the characteristics of implicit OHOC scheme are shown in the point of CFL number.