• 한국초전도ㆍ저온공학회논문지
• /
• 제3권1호
• /
• pp.56-63
• /
• 2001

The thermal stability conditions are investigated for superconducting magnet systems cooled conductively by cryocooler without liquid cryogens. The worst scenario in the systems is that the heat generation in the resistive state exceeds the refrigeration. causing a rise in the temperature of the magnet winding and leading to the burnout. It is shown by an analytical solution that in the continuous resistive state, the temperature may increase indefinitely or a stable steady-state may be reached, depending upon the relative size of the magnet with respect to the refrigeration capacity of the cryocooler. The stability criteria include the temperature-dependent Properties of the magnet materials and the refrigeration characteristics of the cryocooler. A useful graphical scheme is Presented and discussed to demonstrate the physical importance of the results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.370-370
• /
• 2010

The effects of adding higher-valence impurities on the bipolar resistive switching characteristics of Pt/$NiO_{1+x}$/TiN MIM stacks and physical properties were investigated. $NiO_{1+x}$ films with 14% W deposited at 20% oxygen partial pressure exhibited the bipolar resistance switching characteristics in Pt/$NiO_{1+x}$/TiN MIM stacks, while $NiO_{1+x}$ films with 8.2% W show unipolar resistance switching behavior. The relationship of W-doping and the crystallinity was studied by X-ray diffraction. The metallic Ni contents and $WO_x$ binding states with W amount was investigated by XPS. Our result showed that the metallic Ni, $WO_x$ binding states, and crystallinity in $NiO_{1+x}$ played an important role on the bipolar resistive switching.

• 전기학회논문지P
• /
• 제63권2호
• /
• pp.119-123
• /
• 2014

In this study, four kinds of specimens of PE(polyethylene)-based insulating materials were prepared for selecting the optimum insulation materials in a wet environment. The specimens were tested by various methods, the anti tracking test, the transmittance test in the water vapor transmittance(WVT) and the abrasion resistive test, etc. The HDPE(high-density polyethylene) specimen was showed excellent property in the tracking resistance test and the lowest transmittance in water vapor transmittance test. In the abrasion resistive test, the LLDPE(linear low-density polyethylene) and MDPE(medium-density Polyethylene) were showed excellent mechanical properties. The value of cut-through resistance for MDPE and HDPE were superior to that for LLDPE and LDPE(low-density polyethylene).

• 반도체디스플레이기술학회지
• /
• 제20권1호
• /
• pp.113-117
• /
• 2021

A composite active layer was designed based on graphene quantum dots, which is a low-dimensional structure, and a heterogeneous active layer of graphene quantum dots was applied to the interfacial defect structure to overcome the limitations. Increasing to 1.5~3.5 wt % PVP GQD, Vf changed from 2.16 ~ 2.72 V. When negative deflection is applied to the lower electrode, electrons travel through the HfOx/ITO interface. The Al + ions are reduced and the device dominates at low resistance. In addition, as the PVP GQD concentration increased, the depth of the interfacial defect decreased, and the repetition of appropriate electrical properties was confirmed through Al and HfOx/ITO. The low interfacial defects help electrophoresis of Al+ ions to the PVP GQD layer and the HfOx thin film. A local electric field increase occurred, resulting in the breakage of the conductive filament in the defect.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.891-893
• /
• 1992

Polymers have good electrical properties as an insulation material. Though they show more and less poor resistance to heat, radiation, and oxygen, the poor properties have been overcame by developing new resin with the saturated molecular structure and compounding resin with resistive fillers. Polymer insulators have many advantages; light weight, good mechanical properties, better contaimination performance, low cost by mass productivity, no destruction in many pieces, good flexibility in design, short manufacturing time. Usage of polymer insulators has increased rapidly with good credit on long term properties in advanced nations and will continue to grow.

• 공업화학
• /
• 제20권4호
• /
• pp.416-422
• /
• 2009

강구조 건축물은 화재시 화염을 차단하기 위한 목적으로 내화재료를 사용하고 있다. 일반적으로 모든 건축 구조용 재료는 시간이 경과할수록 초기의 성능이 열화되기 때문에 이들의 유지관리가 필요하다. 내화 피복재는 건축물의 화재에 대한 내구성능은 내화피복재에 의존하기 때문에 건축물에서 매우 중요한 재료라 할 수 있다. 본 연구에서는 내화피복재로서의 알칼리 규산염의 합성 및 합성한 알칼리 규산염의 물성에 대해 연구하였는데, 알칼리 규산염의 종류로는 potassium silicate, sodium silicate, lithium silicate으로 하였으며, 기본적으로 몰 비율의 변화를 주어 합성하였다. 합성한 알칼리 규산염의 내화특성을 확인하기 위하여 용해도 포비도, 열 분석, 결정학적 분석, 차열성능 및 차염성능에 대해 시험하였다. 연구결과, 합성한 알칼리 규산염의 용해도, 포비도는 칼륨 실리케이트, 소디움 실리케이트, 리튬실리케이트의 순서로 나타났으며, 열분석에 의한 무게 손실은 소디움 실리케이트와 리튬 실리케이트가 칼륨 실리케이트 보다 큰 것으로 나타났다. 또한 화재 시 가장 중요한 차열성능과 차염성능에 대해KS 기준을 만족하는 것은 소디움 실리케이트 3.3 몰 배합으로 나타났는데, 내화피복재로서 우수한 성능을 발휘하였다.

• 폴리머
• /
• 제31권4호
• /
• pp.302-307
• /
• 2007

저항형 습도센서를 제조하기 위하여 [2-[(methacryloyloxy)ethyl]dimethyl] propylammonium bromide(MEPAB), [2-[(methacryloyloxy)ethyl]-2-hydroxyethyl]dimethylammonium bromide(MEHDAB), 2-[(methacryloyloxy)ethyl]trimethylammonium chloride(METAC), 그리고 n-butyl methylacrylate(BMA)의 공중합체를 사용하였다. 4가지 종류의 4원 공중합체 MEPAB/BMA/MEHDAB/METAC=4/4/1/1, 3/5/1/1, 2/6/1/1, 1/7/1/1을 blocked-isocyanate가교제를 사용하여 Ag/Pd 전극/알루미나에 도포한 후 좋은 내수성을 보여주었다. 습도센서의 상대습도에 대한 주파수 의존성, 온도 의존성, 히스테리시스, 응답속도 그리고 내수성을 평가하였다. MEPAB/BMA/MEHDAB/METAC=2/6/1/1 공중합체의 경우, $30{\sim}90%RH$에서 $1.4\;M{\Omega}{\sim}2.9\;k{\Omega}$의 저항을 보여주었으며 좋은 직선성과 작은 히스테리시스를 보여주었다.

• Composites Research
• /
• 제26권1호
• /
• pp.72-78
• /
• 2013

불연속 탄소섬유-에폭시 복합재의 저항발열 특성에 관한 연구를 수행하였다. 1, 3, 5 wt.% 불연속 탄소섬유가 함유된 복합재 시험편을 초음파 처리와 캐스트 몰딩(cast molding)을 이용하여 제조하였다. 시편에 DC 전류 인가시 발생되는 저항열에 의한 시편의 표면온도 변화를 적외선 카메라를 이용하여 측정하였다. 발열온도를 예측하기 위해서 유한요소해석을 수행하였는데, 실측된 온도와 부합함을 확인하였다. 탄소섬유의 함량과 인가전압이 증가할수록 발열저항에 의해서 발생된 열은 증가함을 확인하였다. 복합재 내에서 균일한 온도분포를 얻기 위해서는 탄소섬유의 분산상태가 중요하며, 대기온과 습도 등 실험환경이 발열온도에 영향을 미치는 것으로 나타났다.

• 한국재료학회지
• /
• 제32권9호
• /
• pp.384-390
• /
• 2022

A spin coating process for RRAM, which is a TiN/TiO₂/FTO structure based on a PTC sol solution, was developed in this laboratory, a method which enables low-temperature and eco-friendly manufacturing. The RRAM corresponds to an OxRAM that operates through the formation and extinction of conductive filaments. Heat treatment was selected as a method of controlling oxygen vacancy (V_O), a major factor of the conductive filament. It was carried out at 100 ℃ under moisture removal conditions and at 300 ℃ and 500 ℃ for excellent phase stability. XRD analysis confirmed the anatase phase in the thin film increased as the heat treatment increased, and the Ti³⁺ and OH- groups were observed to decrease in the XPS analysis. In the I-V analysis, the device at 100 ℃ showed a low primary SET voltage of 5.1 V and a high ON/OFF ratio of 10⁴. The double-logarithmic plot of the I-V curve confirmed the device at 100 ℃ required a low operating voltage. As a result, the 100 ℃ heat treatment conditions were suitable for the low voltage driving and high ON/OFF ratio of TiN/TiO₂/FTO RRAM devices and these results suggest that the operating voltage and ON/OFF ratio required for OxRAM devices used in various fields under specific heat treatment conditions can be compromised.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.6-6
• /
• 2000

By using the information obtained from the outputs of MR(MagnetoResistive) sensors for an Unmanned Vehicle Driving System, we develop an algorithm that decides the distance and direction between vehicle and the guideline which is made by the magnet. To improve the robust tracking properties of the closed loop system, we introduce H$\infty$ controller and its application for the Unmanned Vehicle Driving System.