• 제목/요약/키워드: Resistant length

검색결과 324건 처리시간 0.026초

고품질 스테레오 음악을 위한 오디오 워터마크 정보 삽입/추출 기술 (An Embedding /Extracting Method of Audio Watermark Information for High Quality Stereo Music)

  • 배경율
    • 지능정보연구
    • /
    • 제24권2호
    • /
    • pp.21-35
    • /
    • 2018
  • 본 논문에서는 스테레오 음악에 오디오 워터마크를 삽입하기 위한 알고리즘을 제안하였다. 스테레오 음악은 2개의 채널을 갖고 있기 때문에 기존 워터마킹 기술은 일반적으로 각 채널을 독립적으로 생각하고 처리하는 경우가 많다. 그러나 스테레오를 모노로 변환하는 과정에서 워터마크의 손실이 발생하는 경우가 많이 발생할 수 있다. 제안한 알고리즘은 스테레오를 모노로 변환하더라도 워터마크의 손실이 발생하지 않도록 워터마크를 삽입할 때 스테레오와 모노변환의 특성을 이용하였다. 제안된 알고리즘에 사용된 오디오 워터마크는 "Copyright"와 "Copy_free"라는 두 가지 정보를 터보코드를 이용하여 생성하였다. 두 워터마크는 9바이트(72비트)로 이루어져 있으며, 오류정정을 위하여 터보코드를 적용하면 222비트로 삽입해야 하는 정보량이 늘어난다. 222비트의 워터마크는 추가적인 오류에 강인하도록 1024비트로 확장하여 최종적으로 스테레오 음악에 삽입할 워터마크로 사용하였다. 평균적으로 SNR은 40dB를 넘어서서 전통적인 양자화 방식보다 10dB 이상의 음질 개선을 가져왔다. 이는 상대적으로 10배의 음질 개선도를 의미하는 것으로 매우 유의미한 결과이다. 또한 워터마크의 추출에 필요한 샘플길이는 1초 이내의 길이면 충분히 추출이 가능하고, 128Kbps의 비트레이트를 갖는 MP3 압축에 대해서도 모두 1초 이내 길이의 음악 샘플로부터 워터마크의 완전한 추출이 가능하였다. 전통적인 양자화 방식이 10초 길이의 샘플을 이용해도 대부분 워터마크의 추출에 실패한 것에 비하면 1/10에 불과한 길이로 워터마크의 추출이 가능하다.

Selection and Characterizations of Gamma Radiation-Induced Submergence Tolerant Line in Rice

  • Lee In-Sok;Kim Dong-Sub;hua Jin;Kang Si-Yong;Song Hi-Sup;Lee Sang-Jae;Lim Yong-Pyo;Lee Young-Il
    • Journal of Plant Biotechnology
    • /
    • 제5권3호
    • /
    • pp.173-179
    • /
    • 2003
  • The combination of a radiation technique with an in vitro culture system was appiled to develop submergence tolerant rice. The 3,000 $M_3$ lines with an average 80 percent of fertile grain were utilized for the selection of submergence tolerance. Salt tolerant lines were selected based on high plant height, root length and root number after submergence in plastic pots. Of the lines tested, the tolerant line (403-6) showed a dramatic difference in morphological traits under submergence compared to its original variety (Dongjinbyeo). It was suggested that genetic variations between the original variety and $M_3$-403-6 did exist. The levels of $\alpha$-amylase and alcohol dehydrogenase activities were significantly increased in the mutant line compared to its original variety. The mutant with greater tolerance showed less electrolyte leakage indicating a greater membrane integrity and better survival. Also, this line was much more resistant to a salt stress of $1.25\%$ than the original variety. The proline level of the line was significantly (p<0.01> higher than that of the original variety. The relationships between the inhibition of growth caused by stress and the physiological changes in the plant cell were discussed.

파장가변이 가능한 완전 광섬유형 궤환 레이저 구현 및 응용 (Fabrication of tunable all-fiber feedback laser and its application)

  • 손경락
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제33권8호
    • /
    • pp.1220-1225
    • /
    • 2009
  • 본 논문에서는 사냑 루프 필터와 광섬유 격자 기반의 파장가변 궤환 레이저를 제안하고 있다. 다중파장을 제공하기 위하여 복굴절을 이용한 사냑 루프를 적용하였고 0.33nm의 인접 채널간격을 가지도록 제작하였다. 광섬유 격자의 열 광학 효과에 의한 파장가변을 유도하기 위하여 니크롬선을 격자위에 감았다. 파장가변과 분리에 대한 특성을 측정하기 위하여 길이가 다른 니크롬선으로 두 종류의 광섬유 격자 소자를 제작하였으며, 열 저항으로 파장가변이 되게 하였다. 광섬유격자의 반사파장이 사냑루프 다중파장의 특정 파장과 일치하면 모드 잠김현상에 의해서 공진하고 발진하게 된다. 공진파장의 이동도는 1.75pm/mW이다. 이 시스템은 전력 시스템의 전력 변동을 모니터링하는 분야에 적용할 수 있다.

Tissue Distribution, SNP Detection and Association Study with Immune Traits of Porcine LBP and CD14 Genes

  • Liu, H.Z.;Li, X.Y.;Liu, B.;Yu, M.;Ma, Y.H.;Chu, M.X.;Li, K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제21권8호
    • /
    • pp.1080-1087
    • /
    • 2008
  • Lipopolysaccharide binding protein (LBP) and CD14 protein play important roles in the defense against infection of Gram-negative bacteria. In the present study, tissue distribution and polymorphism of porcine LBP and CD14 genes were analyzed. Real-time PCR results showed that the porcine LBP gene was especially highly expressed in liver, while CD14 gene was highly expressed in liver and spleen tissues. A 1,732 bp cDNA fragment of porcine LBP gene and a 1,682 bp genomic DNA fragment of CD14 gene were isolated. Polymorphisms were identified in these two fragments and showed that there were 14 potential SNPs in the porcine LBP gene and 3 potential SNPs in the porcine CD14 gene. Three SNPs, 292G/A (Gly/Ser), 1168G/A (Ala/Thr) of the LBP gene and -61G/A of the CD14 gene, were genotyped using restriction fragment length polymorphism (RFLP) method. Association analyses indicated that polymorphism of the 292G/A locus was significantly associated with porcine immune traits hematocrit (HCT), IgG and delayed-type hypersensitivity (DTH) (p<0.01), and the 1168G/A locus was significantly associated with HCT and mean corpuscular volume (MCV) traits (p<0.05). No significant association was found between the -61G/A locus and immune traits of the pig. Our data indicated that the LBP gene was significantly associated with immune traits of pig. Also, we identified some SNPs which may be useful markers for disease-resistant breeding of pigs.

스퍼터링 방법으로 성장시킨 나노구조의 Ga 농도 변화에 따른 형상 변화

  • 김영이;우창호;조형균
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2009년도 추계학술발표대회
    • /
    • pp.23.1-23.1
    • /
    • 2009
  • ZnO is of great interest for various technological applications ranging from optoelectronics to chemical sensors because of its superior emission, electronic, and chemical properties. In addition, vertically well-aligned ZnO nanorods on large areas with good optical and structural properties are of special interest for the fabrication of electronic and optical nanodevices. To date, several approaches have been proposed for the growth of one-dimensional (1D) ZnO nanostructunres. Several groups have been reported the MOCVD growth of ZnO nanorods with no metal catalysts at $400^{\circ}C$, and fabricated a well-aligned ZnO nanorod array on a PLD prepared ZnO film by using a catalyst-free method. It has been suggested that the synthesis of ZnO nanowires using a template-less/surfactant-free aqueous method. However, despite being a well-established and cost-effective method of thin film deposition, the use of magnetrons puttering to grow ZnO nanorods has not been reported yet. Additionally,magnetron sputtering has the dvantage of producing highly oriented ZnO film sat a relatively low process temperature. Currently, more effort has been concentrated on the synthesis of 1D ZnO nanostructures doped with various metal elements (Al, In, Ga, etc.) to obtain nanostructures with high quality,improved emission properties, and high conductance in functional oxide semiconductors. Among these dopants, Ga-doped ZnO has demonstrated substantial advantages over Al-doped ZnO, including greater resistant to oxidation. Since the covalent bond length of Ga-O ($1.92\;{\AA}$) is nearly equal to that of Zn-O ($1.97\;{\AA}$), high electron mobility and low electrical resistivity are also expected in the Ga-doped ZnO. In this article, we report the successful growth of Ga-doped ZnO nanorods on c-Sapphire substrate without metal catalysts by magnetrons puttering and our investigations of their structural, optical, and field emission properties.

  • PDF

16 Tesla급 고자장 발생용 초전도 마그네트 개발 (Development of Clamped Tesla Superconducting Magnet.)

  • 권영길;조전욱;이언용;진홍범;하동우;오봉환;김해종;오상수;류강식
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1996년도 하계학술대회 논문집 A
    • /
    • pp.199-201
    • /
    • 1996
  • The design and manufacturing results of a 16 tesla/45mm bore superconducting magnet is presented. The system consists of an 8.2 tesla(at 4.2K) outer NbTi coil with a bore I.D. of 261mm, a winding O.D. of 453mm and the length of 430mm which is connected in series with a 5.6 tesla(at 4.2K) middle and a 4.7 tesla(at 4.2K) inner insert coil constructed of multifilamentary $Nb_3Sn$. The middle and inner insert coil are reacted after winding. Also, epoxy impregnation is accomplished at $Nb_3Sn$ coils using a low viscosity crack resistant epoxy which is forced into the coil with a series of vacuum and over atmosphere pressure cycle.

  • PDF

강섬유보강 패널구조의 보강효과 분석 및 인성평가 기법 (Steel Fiber Reinforcing Effect Analysis of Slab Panel Structure and Assessment Technics of Toughness)

  • 전찬기;박선규
    • 콘크리트학회지
    • /
    • 제11권2호
    • /
    • pp.209-220
    • /
    • 1999
  • 터널의 숏크리트 라이닝이나 포장 콘크리트 보강용으로 요접철망(wire mesh)을 대신해서 강섬유가 사용되고 있다. 본 연구에서는 강섬유 보강으로 인한 인성평가 대상 구조물을 slab panel 구조($60{\times}60{\times}10$cm)로 하고, 강섬유 혼입률은 콘크리트 용적의 0.5% ~ 2%로 다양화하였다. 이 때 사용한 강섬유는 Dramix ZC type으로 직경은 0.8mm, 길이는 60mm이다. 강섬유 효과의 상대평가를 위한 용접철망(wire mesh)보강은 상면, 하면, 상하면 보강으로 하였다. 이들 실험 결과를 각국의 인성 평가 방법으로 비교 검토한 결과 슬래브(slab) 시험체 적용을 위한 EFNARC의 방법은 25mm의 처짐까지 측정하는 것이 너무 큰 것으로 평가되었고, 보의 휨인성 평가법을 적용하여 검토한 결과에서는 Johnston(II)방법에 의한 $I_{5.5}$ 가장 적절하였으며, JCI-SF4방법에서 지간의 1/150까지 측정하는 것은 너무 작았다. 또한 강섬유로 용접철망(wire mesh)을 효과적으로 대치할 수 있음을 알 수 있었고, 인성효과에 유용한 강섬유 혼입량은 0.5% ~ 1%범위에 있는 것으로 나타났다.

2002년 사료작물 수입적응성 인증품종의 생육기성 및 수동성 1. 조숙 양질 다수성 사료작물 옥수수 교잡종 “DK 537” (Characteristics and Yield of Recommended Cultivars by Imported Forage Crop Regional Yield Trials in 2002 I. Early Maturing, Good Qualify, and High Yield of Forage Corn Hybrid, “DK 537)

  • 성병렬;최기준;임용우;임영철;박근제
    • 한국초지조사료학회지
    • /
    • 제22권4호
    • /
    • pp.247-252
    • /
    • 2002
  • “DK 537”has been selected by forage crop breeding team at the National Livestock Research Institute(NLRI), RDA and has been determined by the Deliberative Council of the National Agricultural Cooperative Federation(NACF) in 2002, as a new recommended hybrid which is early maturing, good quality and hi호 yield of corn for silage. The characteristics of this hybrid are as follows ; 1. The seed coat is yellow and the mean of tasseling date is 5th of July, included in early maturing hybrid which is one day delayed than check cultivar, DK 501. The culm length is 246cm. It is resistant to lodging because of its low height from surface to ear. 2. DK 537 shows resistance to H. maydis and Maize Black-Streaked Dwarf Virus(MBSDV). It also shows strength to corn borer as much as DK 501 does. 3. Fresh yield. dry matter yield. and TDN per a ha are 50 tons, 16.9 tons, and 11.4 tons respectively. which are almost same yielding level of DK 501. Its percent ear to total dry matter is 50.8% at the same time. Through all these tests, we could make sure at DK 537 hybrid will be recommended as good forage crop.

Potential of Cross-infection of Colletotrichum Species Causing Anthracnose in Persimmon and Pepper

  • Kim, Hye-Ryoung;Lim, Tae-Heon;Kim, Joo-Hyung;Kim, Young-Ho;Kim, Heung-Tae
    • The Plant Pathology Journal
    • /
    • 제25권1호
    • /
    • pp.13-20
    • /
    • 2009
  • Ninety isolates of Colletotrichum species from new persimmon tree twigs and 50 isolates from pepper plant fruits were isolated via single-spore isolation. Of the 140 isolates, 26 were examined for mycelial growth, carbendazim sensitivity, and ITS sequence. Four of the isolates from the persimmon trees, which were cultivated exclusively in an orchard, showed fast mycelial growth and sensitivity to carbendazim, while five of the pepper isolates showed slower mycelial growth and were resistant to the fungicide. However, 17 isolates from persimmon trees cultivated with pepper plants in the same orchard showed slow mycelial growth like the pepper isolates and they were sensitive to carbendazim like the persimmon isolates. ITS sequence analysis of these 27 isolates led to the identification of the 22 persimmon isolates as C. gloeosporioides and the five pepper isolates as C. acutatum. PCR with species-specific primers confirmed that the 90 isolates from persimmon were C. gloeosporioides whereas the 50 isolates from pepper were C. acutatum. The 90 persimmon isolates of C. gloeosporioides and 50 pepper isolates of C. acutatum were compared by a wound inoculation test to determine their capacity for host cross-infection. All of the C. acutatum isolates from pepper caused typical symptoms of anthracnose on the fruits of pepper plants and twigs of persimmon; they differed from the C. gloeosporioides isolates from persimmon, more than 90% of which were able to infect only persimmon. Amplified fragment length polymorphism analysis revealed the existence of two groups (C. gloeosporioides and C. acutatum isolates group). At 80% genetic similarity, the C. gloeosporioides group was defined within four clusters, while the C. acutatum group was within three clusters. However, these clusterings were unrelated with the virulence of Colletotrichum species against pepper fruits.

FEM해석에 의한 막장볼트 및 보조벤치의 막장안정성 효과에 관한 연구 (Study on the Effect of Bolt and Sub-bench on the Stabilization of Tunnel Face through FEM Analysis)

  • 김성열;윤지선
    • 터널과지하공간
    • /
    • 제18권6호
    • /
    • pp.427-435
    • /
    • 2008
  • 본 연구에서는 지반등급 V중에서 막장자립이 곤란한 지반에 대해 지반고유의 지지력을 최대한 이용하기 위한 굴착공법 및 적정벤치길이에 대해 검토하고, 보조공법으로 막장볼트를 적용할 경우 타설 패턴, 타설 개수에 따라 막장 및 막장주변지반에 어떠한 영향이 발생되는지에 대해 3차원 FEM해석을 수행하였다. 보조벤치 병용전단면공법이 조기 단면폐합으로 변위를 크게 줄일 수 있음을 알 수 있었으며, 타설 패턴으로는 격자상, 교호배치형(지그재그형), 원주상순으로 변위억제효과가 있는 것으로 나타났다. 또한 타설 개수 증가에 따라 막장축방향 수평변위에 대해 억제효과가 있는 것으로 분석되었으며 보조벤치 병용 전단면공법굴착시공의 경우 막장부 $1.5m^2$에 1개의 막장볼트(격자상) 타설로 막장면 안정성을 확보할 수 있을 것으로 판단되었다.