• Journal of Plant Biotechnology
• /
• v.5 no.3
• /
• pp.173-179
• /
• 2003

The combination of a radiation technique with an in vitro culture system was appiled to develop submergence tolerant rice. The 3,000 $M_3$ lines with an average 80 percent of fertile grain were utilized for the selection of submergence tolerance. Salt tolerant lines were selected based on high plant height, root length and root number after submergence in plastic pots. Of the lines tested, the tolerant line (403-6) showed a dramatic difference in morphological traits under submergence compared to its original variety (Dongjinbyeo). It was suggested that genetic variations between the original variety and $M_3$-403-6 did exist. The levels of $\alpha$-amylase and alcohol dehydrogenase activities were significantly increased in the mutant line compared to its original variety. The mutant with greater tolerance showed less electrolyte leakage indicating a greater membrane integrity and better survival. Also, this line was much more resistant to a salt stress of $1.25\%$ than the original variety. The proline level of the line was significantly (p<0.01> higher than that of the original variety. The relationships between the inhibition of growth caused by stress and the physiological changes in the plant cell were discussed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1220-1225
• /
• 2009

In this paper, a tunable fiber feedback laser based on the use of Sagnac loop filter and fiber Bragg grating (FBG) is proposed. The Sagnac loop filter using a high birefringence fiber provides precise 0.33-nm channel spacing as a multi-wavelength grid filter. Ni-Cr wire wound on the FBG is useful to induce the thermo-optic effect of the fiber. Two types of FBG structures, which have a different length of wire, are demonstrated to show the wavelength shift and separation. To tune FBG by resistant heat, some current is supplied into the wire. When the wavelength matched with one of the cavity modes of Sagnac loop filter, the mode-locked lasing is occurred. The electrical power sensitivity of the resonant wavelength is measured to 1.75pm/mW. This laser configuration can be applied the electrical power system for monitoring the power fluctuation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.8
• /
• pp.1080-1087
• /
• 2008

Lipopolysaccharide binding protein (LBP) and CD14 protein play important roles in the defense against infection of Gram-negative bacteria. In the present study, tissue distribution and polymorphism of porcine LBP and CD14 genes were analyzed. Real-time PCR results showed that the porcine LBP gene was especially highly expressed in liver, while CD14 gene was highly expressed in liver and spleen tissues. A 1,732 bp cDNA fragment of porcine LBP gene and a 1,682 bp genomic DNA fragment of CD14 gene were isolated. Polymorphisms were identified in these two fragments and showed that there were 14 potential SNPs in the porcine LBP gene and 3 potential SNPs in the porcine CD14 gene. Three SNPs, 292G/A (Gly/Ser), 1168G/A (Ala/Thr) of the LBP gene and -61G/A of the CD14 gene, were genotyped using restriction fragment length polymorphism (RFLP) method. Association analyses indicated that polymorphism of the 292G/A locus was significantly associated with porcine immune traits hematocrit (HCT), IgG and delayed-type hypersensitivity (DTH) (p<0.01), and the 1168G/A locus was significantly associated with HCT and mean corpuscular volume (MCV) traits (p<0.05). No significant association was found between the -61G/A locus and immune traits of the pig. Our data indicated that the LBP gene was significantly associated with immune traits of pig. Also, we identified some SNPs which may be useful markers for disease-resistant breeding of pigs.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.23.1-23.1
• /
• 2009

ZnO is of great interest for various technological applications ranging from optoelectronics to chemical sensors because of its superior emission, electronic, and chemical properties. In addition, vertically well-aligned ZnO nanorods on large areas with good optical and structural properties are of special interest for the fabrication of electronic and optical nanodevices. To date, several approaches have been proposed for the growth of one-dimensional (1D) ZnO nanostructunres. Several groups have been reported the MOCVD growth of ZnO nanorods with no metal catalysts at $400^{\circ}C$, and fabricated a well-aligned ZnO nanorod array on a PLD prepared ZnO film by using a catalyst-free method. It has been suggested that the synthesis of ZnO nanowires using a template-less/surfactant-free aqueous method. However, despite being a well-established and cost-effective method of thin film deposition, the use of magnetrons puttering to grow ZnO nanorods has not been reported yet. Additionally,magnetron sputtering has the dvantage of producing highly oriented ZnO film sat a relatively low process temperature. Currently, more effort has been concentrated on the synthesis of 1D ZnO nanostructures doped with various metal elements (Al, In, Ga, etc.) to obtain nanostructures with high quality,improved emission properties, and high conductance in functional oxide semiconductors. Among these dopants, Ga-doped ZnO has demonstrated substantial advantages over Al-doped ZnO, including greater resistant to oxidation. Since the covalent bond length of Ga-O ($1.92\;{\AA}$) is nearly equal to that of Zn-O ($1.97\;{\AA}$), high electron mobility and low electrical resistivity are also expected in the Ga-doped ZnO. In this article, we report the successful growth of Ga-doped ZnO nanorods on c-Sapphire substrate without metal catalysts by magnetrons puttering and our investigations of their structural, optical, and field emission properties.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.199-201
• /
• 1996

The design and manufacturing results of a 16 tesla/45mm bore superconducting magnet is presented. The system consists of an 8.2 tesla(at 4.2K) outer NbTi coil with a bore I.D. of 261mm, a winding O.D. of 453mm and the length of 430mm which is connected in series with a 5.6 tesla(at 4.2K) middle and a 4.7 tesla(at 4.2K) inner insert coil constructed of multifilamentary $Nb_3Sn$. The middle and inner insert coil are reacted after winding. Also, epoxy impregnation is accomplished at $Nb_3Sn$ coils using a low viscosity crack resistant epoxy which is forced into the coil with a series of vacuum and over atmosphere pressure cycle.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.2
• /
• pp.209-220
• /
• 1999

This paper is aimed to evaluate the effectiveness of flexural toughness of slab panel structures($60{\times}60{\times}10$) reinforced by steel fiber instead of wire mesh. Steel fiber used in this study is double hooked Dramix type fiber. And the fiber length is 60mm, diameter is 0.8mm, Various assessment methods of toughness index are used to estimate the proper effectiveness. In this experimental study, we find that Johnston, JCI-SF4 and EFNARC method are more effective to assess the flexural toughness of slab panels than the others. And the steel fiber is very effective alternative material to reinforce slab panel structures instead of wire mesh. Fiber volume fraction of 0.5~0.75% is more useful than the others in enhancing the post-peak energy absorption and toughness index by Johnston's $I_{5.5}$ assessment method. And the slab panels reinforcing with steel fiber are more resistant to crack propagation than wire mesh reinforcing slabs.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.22 no.4
• /
• pp.247-252
• /
• 2002

“DK 537”has been selected by forage crop breeding team at the National Livestock Research Institute(NLRI), RDA and has been determined by the Deliberative Council of the National Agricultural Cooperative Federation(NACF) in 2002, as a new recommended hybrid which is early maturing, good quality and hi호 yield of corn for silage. The characteristics of this hybrid are as follows ; 1. The seed coat is yellow and the mean of tasseling date is 5th of July, included in early maturing hybrid which is one day delayed than check cultivar, DK 501. The culm length is 246cm. It is resistant to lodging because of its low height from surface to ear. 2. DK 537 shows resistance to H. maydis and Maize Black-Streaked Dwarf Virus(MBSDV). It also shows strength to corn borer as much as DK 501 does. 3. Fresh yield. dry matter yield. and TDN per a ha are 50 tons, 16.9 tons, and 11.4 tons respectively. which are almost same yielding level of DK 501. Its percent ear to total dry matter is 50.8% at the same time. Through all these tests, we could make sure at DK 537 hybrid will be recommended as good forage crop.

• The Plant Pathology Journal
• /
• v.25 no.1
• /
• pp.13-20
• /
• 2009

Ninety isolates of Colletotrichum species from new persimmon tree twigs and 50 isolates from pepper plant fruits were isolated via single-spore isolation. Of the 140 isolates, 26 were examined for mycelial growth, carbendazim sensitivity, and ITS sequence. Four of the isolates from the persimmon trees, which were cultivated exclusively in an orchard, showed fast mycelial growth and sensitivity to carbendazim, while five of the pepper isolates showed slower mycelial growth and were resistant to the fungicide. However, 17 isolates from persimmon trees cultivated with pepper plants in the same orchard showed slow mycelial growth like the pepper isolates and they were sensitive to carbendazim like the persimmon isolates. ITS sequence analysis of these 27 isolates led to the identification of the 22 persimmon isolates as C. gloeosporioides and the five pepper isolates as C. acutatum. PCR with species-specific primers confirmed that the 90 isolates from persimmon were C. gloeosporioides whereas the 50 isolates from pepper were C. acutatum. The 90 persimmon isolates of C. gloeosporioides and 50 pepper isolates of C. acutatum were compared by a wound inoculation test to determine their capacity for host cross-infection. All of the C. acutatum isolates from pepper caused typical symptoms of anthracnose on the fruits of pepper plants and twigs of persimmon; they differed from the C. gloeosporioides isolates from persimmon, more than 90% of which were able to infect only persimmon. Amplified fragment length polymorphism analysis revealed the existence of two groups (C. gloeosporioides and C. acutatum isolates group). At 80% genetic similarity, the C. gloeosporioides group was defined within four clusters, while the C. acutatum group was within three clusters. However, these clusterings were unrelated with the virulence of Colletotrichum species against pepper fruits.

• Tunnel and Underground Space
• /
• v.18 no.6
• /
• pp.427-435
• /
• 2008

In this paper, review was made for the excavation method and optimum bench length for unstable tunnel face in case of rock classification type V in order to make the best use of in-situ bearing capacity. 3D FEM analyses were performed to investigate the influences on the tunnel face and adjacent area with regard to the pattern and number of bolts when face bolts were used as a supplementary measure. As a result of this study, full section excavation method with sub-bench is effective in reducing the displacement greatly due to early section closure. Displacement-resistant effects in accordance with the bolting patterns are grid type, zig-zag type and then circular type in order of their effect. And horizontal extrusion displacement of tunnel face reduces as the number of bolts increase. A grid type face bolt covering $1.5m^2$ of tunnel face could secure the face stability in case of full section excavation method with sub-bench.

• Journal of Life Science
• /
• v.17 no.9 s.89
• /
• pp.1217-1223
• /
• 2007

I investigated the reproduction system of nine natural populations of P. discolor in Korea and two Mongolian P. conferta populations. The measurements of 19 quantitative or qualitative morphological characters were taken on each of total individuals directly from their natural habitats. Multivariate principal component analyses (PCA) were conducted to detect differences among populations consid-ering several characters simultaneously of variances using the statistical analysis system. 19 morpho-logical characteristics between Korean Potentilla species and Mongolian Potentilla species showed a slight heterogeneity of variance. The length of internodes (LFL and LSI) and characteristics of root (LLR and NOR) were shown a significant difference between two species (P<0.05). The number of ra-mets in P. conferta decreased with increasing geographic distance from viviparity. However, P. discolor has most ramets at distance intervals $60{\sim}80$ cm. In light conditions, P. discolor was significantly less resilience than P. conferta. In drought conditions, although there was not shown significant difference, P. conferta was less resilience than P. discolor. The core analysis indicates that P. conferta is the more resistant species than P. discolor and usually propagates by clonal growth during several strong envi-ronmental disadvantages such as drought events.