• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.12
• /
• pp.60-68
• /
• 1993

Thw VLSI device of submicron level trends to have a low level of reliability because of hot carriers which are caused by short channel effects and which do not appear in a long-channel MOSFET operated in 5V. In order to minimize the generation of hot carrier, much research has been made into various types of drain structures. This study has suggested CG MOSFET (Concaved Gate MOSFET) as new drain structure and compared its electrical characteristics with those of the conventional MOSFET and LDD-structured MOSFET by making use of a simulation method. These three device were assumed to be produced by the LOCOS process and a computer-based analysis(PISCES-2B simulator) was carried out to verify the hot electron-resistant behaviours of the devices. In the present simulation, the channel length of these devises was 1.0$\mu$m and their DC characteristics, such as VS1DT-IS1DT curves, gate and substrate current, potential contours, breakdown voltage and electric field were compared with one another.

• Journal of Environmental Health Sciences
• /
• v.36 no.3
• /
• pp.222-228
• /
• 2010

Biological degradation of nitrogen-containing aromatic compounds was investigated in activated sludge previously adapted to mineralize low concentrations of nitrogen-containing aromatic compounds. Normally, the time required for 95% degradation of 10 mg/l dinitrophenol (DNP) under aerobic conditions was less than 4 hours without any lag, and with mixed liquor suspended solid (MLSS) levels from 600 to 1,000 mg/l. However, when the initial DNP concentration was increased to 75 mg/l, lags and even complete inhibition of DNP degradation were observed. The length of the lag was found to increase proportionally with decreasing MLSS levels. When dilute activated sludge was incubated for extended periods (192 hours), degradation of 75 mg/l DNP did eventually occur after lag periods of 37 to 144 hours, depending on the MLSS concentration. DNP was degradable in high concentrations if MLSS concentrations were sufficiently high to allow growth of bacteria resistant to the toxic effects of DNP.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.06a
• /
• pp.281-286
• /
• 2001

TiAIN was deposited onto ISO P2O Cutting Insert Tip substrate by FVAS at the substrate temperature of 80$^{\circ}C$. Cutting and wear test have been performed with TiAIN coated and uncoated WC cutting tools, respectively. Uncoated WC cutting tool has been tested under similar cutting condition for comparison. Cutting force and tool wear of coated and uncoated carbide cutting tools were investigated by cutting length. In cutting test, cutting force of the coated insert tip was larger than the uncoated insert tip by tool wear. Configuration and wear of the coated tool were more stable and resistant than the uncoated. In tool life by the tool wear, the coated cutting tool life was rather longer than the uncoated when tested at high speed (V=250 m/min) than low speed (V=200 m/min), Cutting force, tool wear and life were analysised by tool dynamometer amp(3ch) and oscilloscope.

• Korean Journal of Breeding Science
• /
• v.42 no.5
• /
• pp.555-564
• /
• 2010

Aphid and mite are the major insects that harm corn. These insects are difficult to control because they are very sensitive to environmental conditions. The purpose of this experiment was to information the loss in quantity of corn and to select inbred lines with resistance after exposing corn to aphid and mite. When exposed to aphid, the average loss in grain yield, ear length, ear diameter, 100 kernel weight, kernel length, kernel width, and kernel thickness were 18.4, 10.9, 1.7, 5.4, 2.3, 1.5 and -0.2%, respectively. When exposed to mite, the average loss in grain yield, ear length, ear diameter, 100 kernel weight, kernel length, kernel width, and kernel thickness were 49.7, 16.5, 20.7, 18.9, 9.5, and -3.4, respectively. Mite had more significant impact on the loss than aphid. Among these factors, grain yield and ear dimater were most significantly correlated on the loss to aphid ($r=0.83^{**}$), while kernel length and thickness were most significantly correlated on the loss to mite ($r=0.83^{**}$). However, ear length was not related to loss to the two insects. The inbred lines that were often used for $F_1$ hybrid which was lower than the average loss by aphid, were KS7, B68, 61B3, 70A1, and KS5, while the inbred lines that were often used for $F_1$ hybrid which was lower than the average decrease by mite, were KS7, B68, 61B3, 66B2-4, 70A1, 72B2, and KS5. These inbred lines could be used to breed inbred lines, hybrid, and open pollination variety that confer resistant to aphid and mite.

• Journal of the Korean Society of Safety
• /
• v.30 no.1
• /
• pp.40-46
• /
• 2015

Many construction equipment or supporting structure should be installed in a field without appropriate anchorage to cause a collapse of those. Anchor length, anchor diameter, hooked or non hooked will be made and tested in the study. This one will be analyzed and compared with the previous study in order to find out some difference, strength by strength, based on this study. Embedded re-bar and the resistant capacity against pulled out force of re bar have been tested and analyzed by concrete design strength and rebar diameter in the study. 21Mpa and 24MPa compressive strength which are used in construction practice have been applied as variables. Those rebars are composed of D13, D16. D22 which are mostly used at construction sites. The followings are summarized as conclusions.1) ductility is not increased as rebar diameter becomes larger under the condition of non-hooked anchorage.2) those are two times of displacement difference between small diameter of rebar and large one with hooked anchorage of rebar while being 1/10 times difference with non-hooked condition but, only 10% difference of maximum load are shown, not conspicuously between hooked and non-hooked condition.3) displacement related to ductility can be three(3) times decreased if only concrete compressive strength and rebar diameter become larger with heavy support weight.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.1
• /
• pp.53-59
• /
• 2010

In seawater deposition condition, the corrosion and chemical attack of grouts are similar to those of concrete structure. Used in domestic MSG (Micro Silica Grouting) mixtured large amounts of silicate materials containing as cement powder is $8,000cm^2/g$ of the specific surface area or more due to the high hydration activity and high-strength, high durability, and features, $C_3A$ content of less than 5% to meet the standards chemical attack of seawater was evaluated as a cement material. Therefore, in this paper, with excellent seawater attack resistant MSG in combination with rapid hardening mineral was used, those of seawater characteristics were evaluated experimentally. Typically, sodium-silicate minerals or rapid hardening cements are used in domestic. About the homogel specimens with combination of MSG and rapid hardening agents for compressive strength, weight and length change characteristics were evaluated experimentally, and so we could present the excellent seawater resistant grouts combination.

• Korean Journal of Veterinary Research
• /
• v.54 no.2
• /
• pp.91-99
• /
• 2014

An antimicrobial susceptibility test was conducted to compare the resistance rates among Campylobacter spp. isolates from dogs (n = 50) raised under diverse conditions and humans (n = 50). More than 60% of Campylobacter (C.) jejuni from dogs and humans showed resistance to nalidixic acid, enrofloxacin and ciprofloxacin. C. jejuni isolates from humans showed higher resistance to tetracycline (83.3%) and ampicillin (91.3%) than those from dogs. None of the C. jejuni or Campylobacter coli isolates from humans or dogs were resistant to erythromycin. Overall, 85% of Campylobacter spp. isolates showed a multidrug resistant phenotype. Nucleotide sequencing analysis of the gryA gene showed that 100% of $NA^R/CIP^R$ C. jejuni isolates from dogs and humans had the Thr-$86^{th}$-Ile mutation, which is associated with fluoroquinolone resistance. flaA PCR restriction fragment length polymorphism (RFLP) typing to differentiate the isolates below the species level revealed 12 different clusters out of 73 strains. The human isolates belonged to eight different RFLP clusters, while five clusters contained dog and human isolates.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1995.07a
• /
• pp.133-170
• /
• 1995

The major objectives of fruit breeding lie in improvement of cultivar, easy to be cultivated and of high quality, in order to produce unexpensive, delicious fruit both for fresh fruit market and processing. Recently, fruit breeding in Korea has contributed to breeding of several superior cultivars in major fruit crops, resulting in appreciable improvement in qualities such as skin color, taste and fruit-bearing habit concerned with productivity. In spite of accomplishments mentioned above, the need for both highly disease-resistant cultivars and long-keeping, physiological disorder-resistant cultivars to meet long distance transsportation in the temperate fruit crops of apples, oriental pears, stone fruits such as peaches, and grapes grown in Korea is rapidly pressing more than ever, as cultivars of today susceptible to pests and diseases and vulnerable to physiological disorders are very expensive and time-consuming in post-harvest handling and management. Thus, imporvements made in the above problems through breeding level will lead to the really enhanced productivity in fruit industry. The major impediments of tree size, the long length of juvenile period and the highly heterogeneous genetic composition to the improvement of fruit crops are responsible for the lower amount and rate of improvements of fruit crops as compared to annuals. Considering the expected limitations of the above problems to be solved through conventional breeding methods and strategy, a turning point of breeding a near perfect cultivar would be laid down if innovative breakthroughs in biological technology will be realized in applying some of the techniques of genetic manipulation at the molecular level to the cultivar improvement of fruit crops, such as the selective insertion of DNA carrying genes that govern desirable characteristics. More than anything else, those traits such as fruiting habit deciding productivity, elements of fruit qualities conditioned by monogene, and disease-and pest-resistance of vital importance for successful fruit growing are urgently desired to be improved by advancement of biotechnology for they are more than difficult and need long period to be attained through conventional breeding method.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.296-301
• /
• 1999

The concerns on the crop damage by ultraviolet (UV) radiations is increasing owing to the decrease of their absorbing stratospheric ozone in the tropospheric. Cultivar differences on early growth of UV radiation among five Korean rice cultivars, four japonica types and one Tongil type (indica-japonica cross hybrid), were studied. Pot-seeded rice plants were grown under four different radiation conditions, i.e., visible radiation only, visible radiation with supplemented with high or low dose of UV-B (280~320 nm in wavelength) and UV-C (less than 280 nm in wavelength). The inhibitory degree on plant height, shoot and root weight and length of leaf blade and leaf sheath were determined at 40 days after seeding. UV-C showed the most severe inhibitory effect on the degree of biomass gain and leaf growth in most cultivars examined, followed by high UV-B and low UV-B. Among the cultivars used, the Kuemobyeo was the most sensitive cultivar and had not repair or showed resistance ability to continued irradiation of UV radiation. However, Janganbyeo and Jaekeon showed different responses that the elongation of leaf blades was promoted on 2nd and 3rd leaves and inhibited on 4th and 5th leaves but this inhibitory degree was reduced on 6 th and 7th leaves. Such tendency on leaf growth means that both cultivars had low sensitivity and most resistant ability to continued irradiation of UV radiation. While Tongil showed different response to enhanced UV radiation, ie., low UV-B promoted leaf growth but the inhibitory was severely increased by continued irradiation of high UV-B and UV-C, which means that Tongil had high threshold of UV radiation for response as an inhibitory light of plant growth. The results of this study indicate that the differences on sensitivity or resistant to the effects of UV radiation were existed among Korean rice cultivars.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.1
• /
• pp.155-158
• /
• 2003

In early 2002, over 200 people in the city of Pusan. Korea suffered from paratyphoid fever resulting from Salmonella Paratyphi A Infection. Antimicrobial susceptibility tests and Xbal pulsed-field gel electrophoresis (PFCE) were conducted to 54 Salmonella Paratyphi A isolated from humans during the period of 1998 to 2002. Most of the isolates ($83\%$) were only nalidixic acid-resistant and $78\%$ were X 1 PFGE patterns. Also, we measured the MIC of ciprofloxacin and screened gyrA mutation(5) using allele- specific PCR and restriction fragment length polymorphism (AS-PCR-RFLP). The representative 5 isolates in 2002 and 1 isolate in 2000 were $1{\mu}g/ml$ of MIC and had mutation at the 83rd codon in gyrA. These data suggest that the outbreak in the early 2002 might have been due to dissemination of the strain present In 2000. Also, decreased susceptibility to ciprofloxacin was partly due to the mutation at the 83rd codon in gyrA.