• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.88-92
• /
• 2004

We developed a helical type drum with an oblique cutting condition for sawdust machine. The existing drum has an orthogonal cutting(2D) condition considering of saw cutter and wood cutting pattern. Additional disadvantage of this type include big cutting resistance, high cost of cutting power and extreme occurrence of vibrations. To improve this shortcoming, we developed a helical type drum with an oblique cutting(3D) condition, therefore, this type drum decreased the vibration and cutting resistance of sawdust machine, and also improved productivity and sawdust porosity.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.293-298
• /
• 1997

Corrosion of steel reinforcing in concrete deteriorated by freezing/thawing and carbonation was characterized. Concrete specimens were prepared using various kinds of cements such as ordinary portland cement (type I), low heat portland cement (type IV, belite rich cement), sulphate resistance portland cement (type V), blast furnace slag portland cement and ternary blended cement. Of various cements, type V and type IV with lower $C_3A$ content revealed better steel corrosion resistance after freezing/thawing and carbonation. $C_3A$ content in cement might affect freezing/thawing resistance in sea water.

• The korean journal of orthodontics
• /
• v.45 no.5
• /
• pp.268-272
• /
• 2015

Clear thermoplastic retainers have been widely used in daily orthodontics; however, they have inherent limitations associated with thermoplastic polymer materials such as dimensional instability, low strength, and poor wear resistance. To solve these problems, we developed a new type of clear orthodontic retainer that incorporates multi-layer hybrid materials. It consists of three layers; an outer polyethylenterephthalate glycol modified (PETG) hard-type polymer, a middle thermoplastic polyurethane (TPU) soft-type polymer, and an inner reinforced resin core. The resin core improves wear resistance and mechanical strength, which prevent unwanted distortion of the bucco-palatal wall of the retainer. The TPU layer absorbs impact and the PETG layer has good formability, optical qualities, fatigue resistance, and dimensional stability, which contributes to increased support from the mandibular dentition, and helps maintain the archform. This new type of vacuum-formed retainer showed improved mechanical strength and rate of water absorption.

• Korean Journal Plant Pathology
• /
• v.10 no.2
• /
• pp.92-98
• /
• 1994

Phytophthora infestans populations collected from various geographical locations of Korea in 1991 and 1993 were analyzed for mating types and responses to metalaxyl. Both A1 and A2 mating type isolates were detected in 1991. The majority of the isolates were A2 mating type, but no A1 mating type was detected in 1993. About 40% of the isolates collected in 1991 were resistant to metalaxyl, and the distribution of metalaxyl-resistant isolates of P. infestans was strongly associated with their geographic origins in Korea. Metalaxyl-resistant isolates with EC50 values > 50$\mu\textrm{g}$/ml were collected from the northern provinces of Kangwon, Kyungbuk, and Chonbuk, but not from the southern provinces of Kyungnam, Chonnam, and Jeju in 1991. The drastic increase in the degree of quantitative resistance to metalaxyl was detected among the isolates from the southern provinces during 1991~1993. More than 50% of the isolates collected from the southern provinces of Kyungnam and Chonnam in 1993 had EC50 values >50$\mu\textrm{g}$/ml. The province of Kangwon had isolates with the greatest resistance to metalaxyl. this alpine areas might be the origin of metalaxyl-resistant isolates of P. infestans in Korea. The A2 genotype with metalaxyl resistance appears to be displacing the A1 genotype which is presently the predominant genotype in Korea.

• Korean Journal of Breeding Science
• /
• v.43 no.4
• /
• pp.273-281
• /
• 2011

Fusarium head blight (FHB), also known as scab, caused mainly by Fusarium graminearum is a devastating disease of wheat in regions that are warm and humid during flowering. In addition to significant yield and quality losses, the mycotoxin deoxynivalenol produced by the pathogen in infected wheat kernels is a serious problem for food and feed safety. Twenty- three Korean cultivars and "Sumai 3", which is a FHB-resistant Chinese cultivar were tested for Type I, Type II resistances of FHB. Three cultivars were identified as resistant in Type I assessment, and two cultivars were resistant in Type II assessment. Genetic variation and relationship among the cultivars were evaluated on the basis of 11 Simple Sequence Repeat (SSR) and 29 Sequence Tagged Site (STS) markers that were linked to FHB resistance Quantitative Trait Loci (QTL) on chromosome 3BS. One SSR and 7 STS markers detected polymorphisms. Especially, using a STS marker (XSTS3B-57), 32.4% of the variation for Type II FHB resistance could be explained. Genetic relationship among Korean wheat cultivars was generally consistent with their released year. These markers on chromosome 3BS have the potential for accelerating the development of Korean wheat cultivars with improved Fusarium head blight resistance through the use of marker-assisted selection.

• Journal of Welding and Joining
• /
• v.31 no.6
• /
• pp.27-31
• /
• 2013

Magnesium alloy is used on parts of aircraft and electronic equipment because of the highest specific strength among the common metal materials. Recently, studies about appling magnesium alloy sheet to automotive bodies are on the increase rapidly. For application to automotive bodies, researches about characteristics of resistance spot welding of magnesium alloy sheet are essential. Magnesium alloy has low boiling point, so getting sound bead shape is difficult when appling varies welding processes. Resistance spot welding is also particular about setting optimum welding conditions because of spatter generation, pores and cracks occurrence in nugget. And life of electrodes is very short because of alloying with copper that main material of electrodes. This requires frequent dressing and replacement of electrodes and decrease in productivity of resistance spot welding on magnesium alloy. Therefore in this study, for effective analysis of changes in tensile shear load and nugget size during electrode life test, evaluate detail characteristics of resistance spot welding on magnesium alloy sheet using dome type electrode.

• Progress in Superconductivity
• /
• v.3 no.1
• /
• pp.104-110
• /
• 2001

Since the strand-to-strand type joint far CICC (Cable-In-Conduit Conductor) is small in size and has low DC resistance, it is expected to be useful type fur a superconducting magnet system which had a compact structure like the KSTAR (Korea Superconducting Tokamak Advanced Research) coil system. The DC resistance is changed according to the distribution patterns of strands in cables connected together in the joint. A commercial code was used for the calculation of the DC resistance. With the decrease of outer diameter of the Joint, Which means the increase of strand volume fraction in the joint, the calculated DC resistance decrease rapidly and non-lineally. The variation of resistance depends mainly on the volume fraction of solder which has higher resistivity than copper. The resistance decrease inversely with the increase of the length of the joint. The resistance increase with increase of number of triplets in each stack contacted with that of another terminal cable. In case of the strand-to-strand joint that has 62mm of outer diameter, 52mm of inner diameter, 100mm of overlap length, and four triplets in each stack, the calculated DC resistance is less than 1 n-Ohm.

• Korean Journal of Microbiology
• /
• v.23 no.4
• /
• pp.282-290
• /
• 1985

Small size antibiotic resistance plasmids having molecular weights less than 10 Mdal were isolated and characterized from ten clinically isolated multiple resistant Staphylococcus aureus. Agarose gel electrophoresis profiles and antibiotic resistance patterns divided these strains into four groups. Strain 2-23-6, the representative strain of a group of five strains conferred two plasmids of molecular weights $1.6{\times}10^6\;dal\;and\;2.0{\times}10^6$ dal. The small plasmid (pSBK 112) specified macrolides, lincosamides and streptogramin type B (MLS) resistance gene which are expressed constitutively. Lage plasmid (pSBK 125) specified chloramphenicol resistance gene which is inducible. Strain 10-5 conferred a $3.0{\times}10^6$ dal plasmid (pSBK 141) which carry an inducible ampicillin resistance gene and strain P-H-2 conferred and $1.6{\times}10^6$ dal plasmid (pSBK 190) which carry a constitutive MLS resistance gene. Strain D-H-1 conferred four plasmids of molecular weights $0.8{\times}10^6$ dal (pSBK 201), $1.6{\times}10^6$ dal (pSBK 202), $2.5{\times}10^6$ dal (pSBK 203), and $1.2{\times}10^7$ dal (pDBK 204), respectively. Among those four plasmids, only pSBK 203 specified chloramphenicol resistance gene. Curing of constitutive MLS resistance using acriding orange or ethidium bromide in 2-23-6 and P-H-2 strains produced 'inducible' MLS resistance strains which are less resistant to MLS than the wild type strains, suggesting that there are two resistance genes in both strains; one is constitutive and the other is inducible.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1034-1038
• /
• 1995

The purpose of this study is to research and develop $TiS_2$ composite cathode for lithium polymer battery(LPB). $TiS_2$ electrode represent a class of insertion positive electrode used in Li secondary batteries. In this study, we investigated preparation of $TiS_2$ composite cathode and AC impedance response of $TiS_2$ composite/SPE/Li cells as a function of state of charge(SOC) and cycling. The resistance of B type cell using $TiS_2PEO_8LiClO_4PC_5EC_5$ composite cathode was lower than that of A type cell using $TiS_2PEO$ composite cathode. The cell resistance of B type cell is high for the first few percent discharge, decreases for midium discharge and then increases again toward the end of discharge. We believe the magnitude of the cell resistance is dominated by passivation layer impedance and small cathode resistance. AC impedance results indicate that the cell internal resistance increase with cycling, and this is attributed to change of passivation layer impedance with cycling. The passivation layer resistance($R_f$) of B type cell decreases for the 2nd cycling and then increases again with cycling. Redox coulombic efficiency of B type cell was about 141% at 1st cycle and 100% at 12th cycle. Also, $TiS_2$ specific capacity was 115 mAh/g at 12 cycle.

• Journal of the Korean Society of Safety
• /
• v.31 no.6
• /
• pp.25-31
• /
• 2016

This paper has analyzed the structure, applicable regulations and the resistance characteristics of insulation ring type of CSST (Corrugated Stainless Steel Tubing for Gas). With the flammability test conducted in accordance with KS C IEC 60811-1-1, the evaluation of insulation resistance, temperature characteristics, and reliability has been conducted. An insulation ring type CSST consists of protective coating, tube, nut, insulation ring, packing, socket, and ball valve. Connecting an insulation ring type CSST to gas tubings for gas appliance is not permitted, moreover, the product shall be installed inside a sleeve pipe in case of buried installation such as the ceiling. Damages on protective coating and tube were detected when fire was applied to the test sample with a portable torch for 60 seconds. The insulation resistance of a normal product was $49.59M{\Omega}$, while that of the product completed the flammability test reduced to $9.21M{\Omega}$. The mean insulation resistance within the confidence Interval of 95% using the mini tap program 17 was $49.59M{\Omega}$ and the mean insulation resistance within the confidence interval reduced to $9.21M{\Omega}$. In the normal distribution analysis of 95% confidence interval, the value-P of the normal product was stable at 0.075 and AD(Anderson-Darling) statistic value was turned out to be 0.063, which is very normal, and the standard deviation was analyzed as 0.2586. The value P of the product completed the flammability test resulted in 0.005, the AD was 1.355 and the standard deviation reduced to 0.07908.