• Tuberculosis and Respiratory Diseases
• /
• 제42권2호
• /
• pp.218-225
• /
• 1995

연구배경: 기도저항은 body plethysmograph를 이용하여 flow/alveolar pressure의 관계를 측정함으로써 얻어질 수 있는데, 기도저항이 정상인 경우 oscillooscope 상에서 얻어지는 resistance curve가 거의 linear 하나 증가된 경우에는 그 모양이 기울어지거나 loop을 형성하는 경우가 많아 이러한 curve를 분석하여 환자의 임상평가에 도움이 되는 결과를 얻고자 하였다. 방법: 기도저항이 증가되어 있는 환자를 대상으로 body plethysmograph에서 quiet breathing시에 얻어진 resistance curve의 형태를 분석하여 폐기능을 비교하였다. 결과: 1) Resistance curve는 type 1: linear, type 2: ovoid, type 3: sigmoid, type 4: scoop, type 5: paisley의 5가지 형태로 구분할 수 있었으며, 1예를 제외한 type 3과 type 4 및 5는 loop을 형성하였다. 2) Curve의 형태가 특정 질환에 특징적이지는 않았으나 급성질환은 주로 type 1, 및 2, 만성기류폐쇄는 주로 type 3, 4 및 5에 속하였으며, 기관지 천식이나 오래된 폐결핵은 그 정도에 따라 type 1 에서 5까지의 형태를 모두 보였다. 3) Type 1에서 type 5로 갈 수록, loop을 형성 할 수록 기도폐쇄가 심하고 기도저항이 증가되며 잔기량이 커지는 경향을 보였다. 결론: 기도저항을 측정할 경우 기도저항의 측정치 뿐 아니라 resistance curve를 분석하여 기도폐쇄와 air trapping의 정도를 판단하는데 도움을 얻을수 있으며, resistance curve의 모양이 특정 질환에 특징적이지는 않았지만 호기시 loop이 형성되는 경우 심한 기도폐쇄를 시사하였다.

• Steel and Composite Structures
• /
• 제18권2호
• /
• pp.497-517
• /
• 2015

This study evaluates behavior of the Y-type perfobond rib shear connector proposed by Kim et al. (2013). In addition, an empirical shear resistance formula is developed based on push-out tests. Various types of the proposed Y-type perfobond rib shear connectors are examined to evaluate the effects of design variables such as concrete strength, number of transverse rebars, and thickness of rib. It is verified that higher concrete strength increases shear resistance but decreases ductility. Placing transverse rebars significantly increases both the shear resistance and ductility. As the thickness of the ribs increases, the shear resistance increases but the ductility decreases. The experimental results indicate that a Y-type perfobond rib shear connector has higher shear resistance and ductility than the conventional stud shear connector. The effects of the end bearing resistance, resistance by transverse rebars, concrete dowel resistance by holes, and concrete dowel resistance by Y-shape ribs on the shear resistance are estimated empirically based on the push-out test results and the additional push-out test results by Kim et al. (2013). An empirical shear resistance formula is suggested to estimate the shear resistance of a Y-type perfobond shear connector for design purposes. The newly developed shear resistance formula is in reasonable agreement with the experimental results because the average ratio of measured shear resistance to estimated shear resistance is 1.024.

• Journal of Crop Science and Biotechnology
• /
• 제10권1호
• /
• pp.3-7
• /
• 2007

Classification of blast resistance type of 129 Korean rice cultivars was carried out based on reaction pattern to 10 Japanese blast pathogen isolates(Pyricularia oryzae). The cultivars were divided into 11 groups based on the presumed resistance genes as follows; Pia type(19 cultivars), Pita-2 type(4), Pik type(3), Pib type(5), Piz type(11), Pik-s type(8), Pik and Pii type(4), Pia and Pita type(8), Pia and Pik type(6), Pita, Pik and Pii type(4) and no-grouping type(57). These results would provide important information to rice breeding for durable and broad resistance to rice blast.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.486-489
• /
• 2003

To reduce lateral force of traditional plunger type piston in the swash plate type hydraulic piston pumps and motors, we have proposed rod type piston with ball joint on both ends. We have studied the theoretical reaction force on two types of piston moving in the cylinder block bore. and made an experiment for the resistance force measurement on a reciprocating motion of plunger and rod type piston, changing the test condition such as swash plate angel and supply oil pressure and so on. As a result. a rod type piston has more smaller resistance force, about 29%. than a plunger type one.

• Journal of the Korean Wood Science and Technology
• /
• 제47권1호
• /
• pp.40-50
• /
• 2019

The aim of this study was to investigate the effects of density, temperature, size, and grain direction on measurement of moisture contents (MC) of wood materials non-destructively. The MC of different sizes of solid wood, glulam, and CLT from larch (larix kaempferi, $560kg/m^3$) and pine (pinus koraiensis, $430kg/m^3$) were measured using the dielectric type and resistance type meters. The specimens were conditioned in the environmental chamber to be equilibrium moisture content (EMC) of 12 % and 19 %. When density setting in dielectric type meter was increased from $400kg/m^3$ to $600kg/m^3$, the MCs of specimen (S-L-100-E) were decreased from 13.4 % to 11.3 %. However, when wood group (WG) setting in resistance type meter was changed from WG1 to WG4, the measured MCs were increased from 9.2 % to 12.3 %. When temperature setting in resistance type meters was changed from 0 to $35^{\circ}C$, the MC was decreased from 17.0 % to 13.0 %. The MCs measured by dielectric type meter for larger specimens (S-L-100-E_11.3 %, G-L-240-E_11.7 % and C-L-120-E_12.8 %) were higher than those of small size specimens (S-L-30-E_8.7 %, G-L-150-E_10.3 %, and C-L-90-E_9.7 %). The MCs measured by resistance type meter for larger specimens (G-L-240-E_11.6 % and C-L-120-E_13.3 %) were also higher than those of small size specimens (G-L-150-E_10.4 %, and C-L-90-E_11.8 %). The resistance type meter was not affected by the grain direction but the dielectric type meter were affected by the grain direction. The MC measured by resistance type meter for G-L-120-E perpendicular to grain direction was 11.5 % and the measured MC parallel to grain direction was 11.3 %. The MC measured by dielectric type meter parallel to grain direction (12.1 %) was higher than that measured perpendicular to grain direction (10.7 %).

• 성인간호학회지
• /
• 제20권3호
• /
• pp.431-442
• /
• 2008

Purpose: The purpose of this study was to examine the effects of resistance exercise program for elders with type 2 Diabetes on the self care, stress and HbA1c. Methods: Thirty three elders with type 2 Diabetes(18 experimental and 15 control subjects) were selected conveniently among the aged who had been enrolled in a community senior center. The subjects in experimental group participated in a resistance exercise program for 8 weeks. Data were analyzed using the SPSS/Win 12.0. Results: The resistance exercise program showed a statistical difference in self care(t=-4.39, p=.000) and stress(t=2.22, p=.034). However, there was not a statistical difference in HbA1c (F=.556, p=.557), but experimental group had decreased continuously in HbA1c after the program. Conclusion: The resistance exercise program improved self care and reduced the stress in the elders with type 2 Diabetes. Therefore, resistance exercise program can be applied as an effective nursing intervention to promote self care, decrease the stress and to prevent complication for the elders with type 2 Diabetes.

• Tribology and Lubricants
• /
• 제35권2호
• /
• pp.139-147
• /
• 2019

This study investigates the effects of corrosion resistance characteristics of opponent materials in relative motion on the sliding wear behavior of mild carbon steel. Pin specimens made of mild carbon steel are tested at several sliding speeds against mating discs made of two types of alloyed steels, such as type D2 tool steel (STD11) and type 420 stainless steel (STS420J2), with different corrosion resistance characteristics in a pin-on-disc type sliding wear test machine. The results clearly show that the sliding wear behavior of mild carbon steel is influenced by the corrosion resistance characteristics of the mating disc materials at low sliding speeds. However, the sliding wear behavior at high sliding speeds is irrelevant to the characteristics because of the rising temperature. During the steady state wear period, the sliding wear rate of mild carbon steel against the type 420 stainless steel at a sliding speed of 0.5 m/s increases considerably unlike against the type D2 tool steel. This may be because the better corrosion resistance characteristics achieve a worse tribochemical reactivity. However, during the running-in wear period at low sliding speeds, the wear behavior of mild carbon steel is influenced by the microstructure after heat treatment of the mating disc materials rather than by their corrosion resistance characteristics.

• 국제초고층학회논문집
• /
• 제2권1호
• /
• pp.39-48
• /
• 2013

The fire resistance performance of generic CFT columns has been verified through various tests and analyses and the columns are widely used for fire resistance designs abroad. In this study, 3 groups of specimens (Non-fire protection, reinforcement with steel fiber and fire resistance paint) are suggested in order to evaluate the fire resistance performance of interior anchor type concrete-filled steel tubular columns having efficient cross-sections through loaded heating tests. Axial deformation-time relationship and in-plane temperatures are compared to evaluate the fire resistance performance of the specimens associated with variables. Suggested from the fact that the interior anchors exposed to fire exert influence on fire resistance performance due to thermal expansion, the reinforcements using steel fiber and fire resistance paint are verified to mitigate contraction and improve fire resistance performance. The result obtained from the tests of interior anchor type concrete-filled tubular columns is expected to be used for effective fire resistance design in association with previously conducted studies.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.163-169
• /
• 1997

The sea water resistance of cement and concrete must be considered when it is used for construction on the seashore of in the ocean. The concrete specimens using seven type of cements such as ordinary Portland cement, moderate heat Portland cement, sulfate resistance Portland cement, type A. B. C Portland blastfurnace slag cement and Portland flyash cement were immersed for 10 years in seawater in Kunsan. This study proved that moderate heat Portland cement, sulfate resistance Portland cement, type A Portland blastfurnace slag cement had higher resistance for seawater.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.527-532
• /
• 2000

The armor composite material targets such as aramid FRMLs with different type and ply number of face material and different type of back-up material, were studied to determine ballistic impact resistance and dynamic failure behavior during ballistic impact. Ballistic impact resistance is determined by $\textrm{V}_{50}$ ballistic limit, a statical velocity with 50% probability for complete penetration, test method. Also dynamic failure behaviors are respectfully observed that result from $\textrm{V}_{50}$ tests. $\textrm{V}_{50}$ tests with $0^{\circ}$ obliquity at room temperature were conducted with projectiles that were able to achieve near or complete penetration during high velocity impact tests. As a result, ballistic impact resistance of anodized Al 5052-H34 alloy(2 ply) is better than that of anodized Al 5052-H34 alloy(1 ply), but Titanium alloy showed the similar ballistic impact resistance. In the face material, ballistic impact resistance of titanium alloy is better than that of anodized Al 5052-H34 alloy. In the back-up material, ballistic impact resistance of T750 type aramid fiber is better than that of CT709 type aramid fiber.