• 한국수소및신에너지학회논문집
• /
• 제6권2호
• /
• pp.53-63
• /
• 1995

차세대의 새로운 발전방식인 용융탄산염형 연료전지 시스템개발 사업중 실용 스택개발을 위하여 전극유효연적이 $100cm^2$ 인 단위전지를 10단 적층한 Cross Flow형 MCFC스택을 제작하고 2성능측정설비를 구성하여 장기운전시험을 실시하였다 연료로는 $H_2/CO_2/H_2O$의 비율을 72%/18%/10% 로 조성한 가스를 이용하고 산화제가스로는 $O_2/CO_2$ 및 $Air/CO_2$ 비율이 33%/67%, 70%/30%가 되는 가스를 이용하여 운전할때의 초기성능 및 15A($150mA/cm^2$) 정부하 상태에서의 장기운전시험시의 전압 강하율을 조사하였다. 운전시간 310시간이 경과된 후의 스택전압은 8.39V이었고 이때의 출력은 125.8W를 보여주었다. 한편 1845시간이 경과한후 공기를 산화제로 이용하는 경우 전압은 6.95V로서 출력 104W를 나타내고 있다. 초기성능치에 의한 에너지 변환효율은 이용율이 40%인 경우 29.65%이었고 80%로 증가하는 경우 약 51.5%가 된다. 1840시간의 경과한때 까지의 전압 강하율은 약 52.4mV/1000hr로서 이전의 스택보다는 전압강하율이 감소되고 있으며 스택의 성능 저하의 주요한 요인은 개회로 전압의 저하로 내부단락동에서 기인하는 것으로 여겨진다. 또한 장기운전사 스택내부에서의 단위전지 전압분포가 균일하지 않음을 알 수 있어 이에 대한 개선을 필요로 한다.

• 한국산학기술학회논문지
• /
• 제20권2호
• /
• pp.1-6
• /
• 2019

본 연구의 목적은 100kW급 연료전지 시스템의 열관리 성능을 실도로 운전조건에서 분석하여, 성능 해석 모델링을 개발하는 것이다. 개발된 모델을 적용하여, 열관리 시스템의 운전조건 변화에 따른 성능 변화를 고찰하고자 한다. 해석 모델링은 핵심부품들에 대한 성능 평가 데이터를 바탕으로, 성능에 영향을 주는 변수들로 개발하였다. 개발된 연료전지 열관리 시스템 해석 모델링으로 다양한 실차 운전조건에서의 최적 열관리 시스템에 대한 전력소비량을 분석하였다. 주요하게, 연료전지 열관리시스템 핵심부품(워터펌프, 냉각 팬, 3 Way Valve, 라디에이터)에 대한 성능 특성 분석 후 모델링을 진행하였다. 개발된 모델링으로 운전조건에 따른 유량 예측을 하였고, 실험값과 예측값과의 비교분석을 통하여서, 해석 모델링에 대한 검증을 진행하였다. 과도해석을 통하여서, 냉시동시 냉각수 온도가 특정온도까지의 소요시간을 예측하였다. 스택 운전조건에서 스택 입출구 온도가 적정 수준에서 움직이기 위한 열관리 시스템 운전조건에 대한 예측을 진행하였다. 그 결과를 바탕으로, 소모전력과 열방출량과의 비교분석을 하였다. 개발된 해석 모델링은 핵심부품들의 성능 변화시 연료전지 시스템 운전에 대한 영향도를 분석할 수 있도록 활용할 예정이다.

• 멤브레인
• /
• 제6권3호
• /
• pp.173-181
• /
• 1996

실리콘 코팅한 복합막을 이용하여 톨로엔이나 메탄올 같은 휘발성 유기화합물의 제거 및 회수에 관한 연구를 수행하였다. 사용된 막은 코팅층의 두께가 얇고($~1\mu$m), 지지층의 기고율이 커서 투과저항은 적었으며 코팅층과 지지층은 플라즈마 중합에 의해 결합되어 있어서 높은 압력에도 견딜 수 있었다. Feed의 유속은 60cc/min. 이하일 때 사용된 모듈에 위해 휘발성 유기화합물의 제거율은 96~99%이었으며, feed의 농도가 높을수록 제거율은 더 증가하였다. 이 공정은 휘발성 유기화합물의 농도가 높고 유속이 낮은 흐름을 처리하는데 아주 적합함을 알 수 있었다. 사용된 막을 통한 휘발성 유기 화합물들의 투과도는 $4~30 \times 10^{-9}gmol/sec \cdot cm^{2}\cdot cmHg$이었고, 질소의 투과도는 $3~9 \times 10^{-10}gmol/sec \cdot cm^{2} \cdot cmHg$의 범위에 있었다. 휘발성 유기화합물과 질소의 선택도는 유속과 휘발성 유기화합물의 농도에 따라 톨루엔/질소의 경우 10~55, 메탄올/질소의 경우 15~125의 값을 얻었다.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1997년도 한국감성과학회 연차학술대회논문집
• /
• pp.75-79
• /
• 1997

The present study was designed to investigate whether there is a consistint changes in the signals from the central and autonomic nervous systim due to olfactory stimulation. The olfactory stimuli were 0.6% orange and 2.5% valeric acid and the stimuli through the olfactory stimulator soth controlled consistint flow, controlled concentration, and saturated with vapour to prevent drying the nasal mucosa. A room air blunk served as the control stimulus, EEG was recorede from 4channels according to the international 10-20 systim. Additionally, ECG, EOG, heart rate, skin conductance and resputation were recorded comtinuously. The fast Fourier transform analysis of EEG waves was analysed with the power spectra. Averaged power spectra were computed for the following frequency bands ; delta(0-4.5Hz), theta (4.5-7Hz), alphal(7-9.5Hz), alpha2 (9.5-12.5Hz) and beta(12.5-30Hz). Withthe results of the subjective sensibility test for the ordor, the orange was related to pleasant and familiar and the valeric acid was realted to snpleasant and bothersome. There is the difference between orange and valeric acid in alphal at PG2-A2 channel. While the unpleasant stimuli seem to be increased in alphal, alpha2 and beta waves at all channels. Also, the heart rate, galvaric skin resistance seem to be decreased by pleasant stimuli and thd unpleasant stimuli shdwed the opposite. In respiration, respiration rate had been declinig tendency, and input/output ampoitued and duration showed an upward trend by olfactory stimulation with orange, while opposite by valeric acid. In conclusion, the consistent EEG changes and the autonomic responses suggests the possibilities of the subjective signal of human sensibility.

• 반도체디스플레이기술학회지
• /
• 제15권4호
• /
• pp.10-15
• /
• 2016

In this paper, novel ball grid array (BGA) interconnection process using solderable anisotropic conductive adhesives (SACAs) with low-melting-point alloy (LMPA) fillers have been developed to enhance the processability in the conventional capillary underfill technique and to overcome the limitations in the no-flow underfill technique. To confirm the feasibility of the proposed technique, BGA interconnection test was performed using two types of SACA with different LMPA concentration (0 and 4 vol%). After the interconnection process, the interconnection characteristics such as morphology of conduction path and electrical properties of BGA assemblies were inspected and compared. The results indicated that BGA assemblies using SACA without LMPA fillers showed weak conduction path formation such as solder bump loss or short circuit formation because of the expansion of air bubbles within the interconnection area due to the relatively high reflow peak temperature. Meanwhile, assemblies using SACA with 4 vol% LMPAs showed stable metallurgical interconnection formation and electrical resistance due to the favorable selective wetting behavior of molten LMPAs for the solder bump and Cu metallization.

• Tribology and Lubricants
• /
• 제31권6호
• /
• pp.258-263
• /
• 2015

Biodiesel is an environmentally-friendly fuel with low smoke emission because it contains about 10% oxygen. Biodiesel fuel prepared by transesterification of vegetable oil or animal fats is susceptible to auto-oxidation. The rate of auto-oxidation depends on the number of methylene double bonds contained within the fatty acid methyl or ethyl ester groups. Biodiesel may be easily oxidized under several conditions, i.e., upon exposure to sunlight, temperature, oxygen environment. Maintenance of the fuel quality of biodiesel requires the development of technologies to increase the resistance of biodiesel to oxidation. Treatment with antioxidants is a promising approach for extending the shelf-life or storage time of biodiesel. The chemical properties of various amine-based antioxidants were evaluated after synthesis of the antioxidants by condensation of phenylenediamine with alkylamines at room temperature. In general, the oxidative stability can be assessed based on various experimental parameters. Such parameters may include temperature, pressure, and the flow rate of air through the samples. The Rancimat method (EN14112) was selected because it is a rapid technique that requires very little sample and provides good precision for oxidative degradation analysis. Specifically, the EN 14112 technique provides enhanced efficiency for oxidative stability evaluation when a larger ester head group is utilized. Therefore, this technique was employed for evaluation of the oxidation stability of biodiesel by the Rancimat method (EN14112).

• 한국수소및신에너지학회논문집
• /
• 제35권4호
• /
• pp.392-400
• /
• 2024

In this study, 3-cell stack fuel cell power technology was developed for charging superconducting coil. It was found that the performance of the fuel cell stack increased depending on the number of activation. In addition, the flow rates of hydrogen and air supplied to 3-cell stack was adjusted because of a large difference in membrane electrode assembly (MEA) characteristics depending on its location. As a result, it was confirmed that it was possible to apply current to the superconducting coil from about 15 to 33 A by changing the variable resistance, and it was confirmed that the voltage difference between fuel cell cells could be overcome through sufficient control of fuel supply.

• 센서학회지
• /
• 제16권1호
• /
• pp.24-32
• /
• 2007

Conductive rubber material was molded in a belt shape to measure respiration. Its resistivity was approximately $0.03{\;}{\Omega}m$ and the resistance-displacement relationship showed a negative exponent. The temperature coefficient was approximately $0.006{\;}k{\Omega}/^{\circ}C$ negligible when practically applied on the abdomen. The conductive rubber belt was applied on a normal male's abdomen with the dimensional change measured during resting breathing. The abdominal signal was differentiated ($F_{m}$) and compared with the accurate standard air flow rate signal ($F_{s}$) obtained by pneumotachometry. $F_{m}$ and $F_{s}$ differed in waveform, but the start and end timings of each breaths were clearly synchronized, demonstrating that the respiratory frequency could be accurately estimated before further processing of $F_{m}$. $F_{m}-F_{s}$ loop showed a nonlinear hysteresis within each breath period, thus 6 piecewise linear approximation was performed, leading to a mean relative error of 14 %. This error level was relatively large for clinical application, though customized calibration seemed feasible for monitoring general variation of ventilation. The present technique would be of convenient and practical application as a new wearable respiratory transducer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.174-177
• /
• 1991

Fluorine-doped $SnO_2\;(SnO_2:F)$ films were prepared in ordinary atmosphere on borosilicate glass substrates using pyrosol deposition method starting from the solutions composed of $SnCl_4-5H_2O-NH_4F-CH_3OH-H_2O-HCl$ in an attempt to develop transparent conductors for use in amorphous silicon (a-Si) solar cello. The deposition rate of films increased with the increase in the content of $H_2O$, whereas it decreased with increasing the content of $CH_3OH$. When air was used as the carrier gas, the lowest electrical resistivity was obtained from a solution having $CH_3OH/H_2O$ mol ratio of about $2{\sim}3$ in the solution. The use of $N_2$ of the same flow rate as the carrier gab resulted always in the high resistive films, but the resistivity of the films decreased continuously with the increase in the content of $H_2O$. The surface morphology and preferred orientation of films were also affected by the solvent composition and the content of HCl in the solution. The room-temperature resistance of the films were fairly stable after heat-treatments up to $600^{\circ}C$.

• The Korean Journal of Physiology
• /
• 제9권2호
• /
• pp.7-15
• /
• 1975

The maximum breathing capacity (MBC) and the maximum mid-expiratory flow rate (MMF) are widely used in evaluation of the ventilatory function, among various parameters of pulmonary function. The MBC volume is the amount of gas which can be exchanged per unit time during maximal voluntary hyperventilation. Performance of this test, unlike that of single breath maneuvers, is affected by the integrity of the respiratory bellows as a whole including such factors are respiratory muscle blood supply, fatigue, and progressive trapping of air. Because of this, the MBC and its relation to ventilatory requirement correlates more closely with subjective dyspnea than does any other test. The MMF is the average flow rate during expiration of the middle 50% of the vital capacity. The MMF is a measurement of a fast vital capacity related to the time required for the maneuver and the MMF relates much better to other dynamic tests of ventilatory function and to dyspnea than total vital capacity, because the MMF reflects the effective volume, or gas per unit of time. Therefore, it is important to have a prediction formula with one can compute the normal value for the subject and the compare with the measured value. However, the formulas for prediction of both MBC and MMF of the Korean children and adolescents are not yet available in the present. Hence, present investigation was attempt to derive the formulas for prediction of both MBC and MMF of the Korean children and adolescents. MBC and MMF were measured in 1,037 healthy Korean children and adolescents (1,035 male and 1,002 female) whose ages ranged from 8 to 18 years. A spirometer (9L, Collins) was used for the measurement of MBC and MMF. Both MBC and MMF were measured 3times in a standing position and the highest values were used. For measurement, the $CO_2$ absorber and sadd valve were removed from the spirometer in order to reduce the resistance in the breathing circuit and the subject was asked to breathe as fast and deeply as possible for 12 seconds in MBC and to exhale completely as fast as possible after maximum inspiration for MMF. During the measurement, investigator stood by the subject to give a constant encouragement. All the measured values were subsequently converted to values at BTPS. The formulas for MBC and MMF were derived by a manner similar to those for Baldwin et al (1949) and Im (1965) as function of age and BSA or age and height. The prediction formulas for MBC (L/min, BTPS) and MMF (L/min, BTPS) of the Korean children and adolescents as derived in this investigation are as follows: For male, MBC=[41.70+{$2.69{\times}Age(years)$}]${\times}BSA$ $(m^{2})$ MBC=[0.083+{$0.045{\times}Age(years)$}]${\times}Ht$ (cm) For female, MBC=[45.53+{$1.55{\times}Age(years)$}]${\times}BSA$ $(m^2)$ MBC=[0.189+{$0.029{\times}Age(years)$}]${\times}Ht$ (cm) For male, MMF= [0.544+{$0.066{\times}Age(years)$}]${\times}Ht$ (cm) For female, MMF=[0.416+{$0.064{\times}Age(years)$}]${\times}Ht$ (cm)