• Transactions of the Korean hydrogen and new energy society
• /
• v.12 no.3
• /
• pp.231-238
• /
• 2001

Electrocatalytic activity of palladium for hydrogen oxidation and reduction was studied using AC impedance method. The system under study was arranged in electrolytic mode consisting of Pd electrode under study, Pt counter electrode and Nafion electrolyte between them. Two types of Pd electrodes were used - carbon-supported Pd (Pd/C) and Pd foil electrode. Pd/C anode contacting pure hydrogen showed a steady decrease of charge transfer resistance with the increase of anodic overpotential, which is an opposite trend to that found with Pd foil anode. But Pd foil cathode also exhibited a decrease of the resistance with the increase of cathodic overpotential. The relationship between imposition of overpotential and subsequent change of the charge transfer resistance is determined by the ratio of the rate of faradaic process to the rate of mass transportation; if mass transfer limitation holds, increase of overpotential accompanies the increase of charge transfer resistance. Regardless of the physical type of Pd electrode, the anode contacting hydrogen/oxygen gas mixture did not reveal any independent arc originated from local anodic oxygen reduction.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.177-183
• /
• 2023

The purpose of this study was to examine the effects of 8 weeks of resistance exercise on gait-related abilities and the differences in age groups to provide reference materials for application of training by age group. Subjects in their 30s, 40s, and 50s were recruited and subjected to a lower extremity exercise, in which the intensity gradually increased three times a week for eight weeks. The gait-related variables, torque at 0.18 sec, acceleration time, and torque at 30°, were assessed through isokinetic tests before and after the 8-week training. The torque at 0.18 sec showed a significant increase in the 50s group. There was no significant difference in acceleration time according to time and group. The torque at 30° showed a significant increase in the 30s group. In conclusion, 8 weeks resistance training can increase neuromuscular activity in adults in their 50s group, and changes in training variables are needed to increase torque at 30° that affects knee stabilization in adults over 40s group.

• The korean journal of orthodontics
• /
• v.20 no.1
• /
• pp.47-59
• /
• 1990

Respiration is one of the most important functions which are carried out in stomatognathic system. When nasal orifice is obstructed or the resistance of upper airway is increased mouth breathing is initiated. Mouth breathing is regarded as an important etiologic factor of dentofacial anomalies. This experiment was performed to observe the influences of metabolic acidosis, tracheal resistance and vagotomy on mouth breathing. After rabbits were anesthetized with sodium pentobarbital, a pair of wire electrode was inserted into mylohyoid muscle, anterior belly of digastric muscle and dilator naris muscle to record EMG activity. Femoral vein and artery were cannulated for infusion of 0.3N HCl and collection of blood sample to determine the blood pH, and tracheal intubation was done to control airway resistance. Mouth breathing was induced by metabolic acidosis. Increase of the airway resistance through tracheal cannula intensified the activity of dilator naris, mylohyoid and digastric muscle. The higher the resistance, the larger the EMG amplitude. After bilateral vagotomy, respiratory volume and inspiatory time were increased and the activities of dilator naris, mylohyoid and digastric muscle were strengthened. It was concluded that the muscle activity related to mouth breathing was induced by metabolic acidosis and increase of tracheal tube resistance.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.65-69
• /
• 2010

This paper presented an experimental study of slip resistance characteristics of shoes and floor surface contact with special focus on the effect of surface roughness, outsole material and mechanical abrasion. The factors that affected the results of slip resistances were investigated for four kinds of rubbers and five kinds of floor samples using the VIT(English XL) tribometer. The slip resistance was observed to increase gradually with increasing roughness for five kinds of floor roughness. In the higher surface roughness (larger than $11.5{\mu}m$), the slip resistance increased more rapidly and exceeded safety criteria at $22.60{\mu}m$. The slip resistance was observed to decrease with increasing hardness of outsole, except for butylenes rubber, which seemed to show the material property. The slip resistance decreased with number of trials. In the first several times(5 or 6 trial), the slip resistance decreased more rapidly, whereafter it approached gradually constant value. The slip resistance of surfaces has generally been shown to increase with floor surface roughness and to decrease with hardness of outsole and number of trials under the wet condition.

• Biomolecules & Therapeutics
• /
• v.3 no.2
• /
• pp.116-121
• /
• 1995

Some multidrug resistance inhibitors have been known to be influenced by the serum concentration. In this study, effect of serum concentration on inhibition of nucleoside transport by BIBW22, a new multidrug resistance inhibitor derived from dipyridamole (DPM), was studied. When 5% or 100% (v/v) of fetal bovine serum (FBS) was contained in the culture, DPM dose for which nucleoside transport was inhibited by 50% (lD$_{50}$) was 0.42 $\mu$M or 1.17 $\mu$M, respectively. BIBW22 also showed the same trend as DPM did in response to increase of FBS concentration. However, ID$_{50}$ value for DPM in the absence or presence of human plasma was 0.007 $\mu$M or 1.02 $\mu$M respectively showing 145 times increase of ID$_{50}$ value. ID$_{50}$ value for BIBW22 in the presence of human plasma was 0.028 $\mu$M showing only 5 times increase in ID$_{50}$ value. This result suggests that potency of BIBW22 was much less affected by the plasma concentration and BIBW22 could be a good candidate for a clinical use in multidrug resistance treatment.treatment.

• Steel and Composite Structures
• /
• v.43 no.3
• /
• pp.353-362
• /
• 2022

Bridge fire hazard has become a growing concern over the last decade due to the rapid increase of ground transportation of hazardous materials and resulting fire incidents. The lack of fire safety provisions in steel bridges can be a significant issue owing steel thermal properties that lead to fast degradation of steel properties at elevated temperatures. Alternatively, the development of composite action between steel girders and concrete decks can increase the fire resistance of steel bridges and meet fire safety requirements in some applications. This paper reviews the fire problem in steel bridges and the fire behavior of composite steel-concrete bridge girders. A numerical model is developed to trace the fire response of a typical bridge girder and is validated using measurements from fire tests. The selected bridge girder is composed by a hot rolled steel section strengthened with bearing stiffeners at midspan and supports. A concrete slab sitting on the top of the girder is connected to the slab through shear studs to provide full composite action. The validated numerical model was used to investigate the fire resistance of real scale bridge girders and the effect of the composite action under different scenarios (standard and hydrocarbon fires). Results showed that composite action can significantly increase the fire resistance of steel bridge girders. Besides, fire severity played an important role in the fire behavior of composite girders and both factors should be taken into consideration in the design of steel bridges for fire safety.

• Journal of the Korean Society for Precision Engineering
• /
• v.1 no.2
• /
• pp.58-68
• /
• 1984

In this study, the static and dynamic components of cutting resistance were measured with tool dynamometer (Swiss, pieso-electric type) when S45C, A1-alloy and brass were drilled under the some variable conditions. The results obtained are as follows; 1) The dynamic components of these cutting resistance are not related to the depth of drilled hole. 2) The static and dynamic components of cutting resistance are increased in accordance with the increase of feed and drill diameter. 3) The dynamic components of thrust force are increased in accordance with the increase of spindle speed. 4) The rate of the dynamic component to the static component is 0.3 .approx. 0.5 in torque, 0.1 .approx. 0.2 in thrust force. 5) The characteristic of the tool system is affected in dynamic component of cutting resistance, and the creasted frequency and amplitude of the chip are determined by the crilled materials. 6) The maximum amplitude of the dynamic component is increased proportionally in accordance with the feed rate and the spindle speed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.04a
• /
• pp.216-224
• /
• 1996

Recently, Korea Highway Corporation has attemped to improve the highway safety in accordance with minimizing user's imconveniences. Currently, the Anti Skidding Pavement(ASP) has been introduced as a safety countermeasure on the safety frailty sections. In this study, a series of field evaluations on pavement skid resistance have been conducted on the skid frailty sections to analyze the effects and problems of the Anti Skidding Pavement (ASP), and to understand the behavior of pavement skid resistance due to pavement type, section characteristics, vehicles' speed and traffec volume. Test results show the Anti Skidding Pavement (ASP) has the effects to induce vehicles' speed reduction. However, there are no effects to increase skid resistance. According to these results, it is demanded to improve the applying method of current Anti Skidding Pavement (ASP) to devise an effective safety countermeasure for pavement skid, and to increase pavement skid resistance.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.127-139
• /
• 2007

The purpose of this study was to examine the pitching ability of baseball player by analysing the effect of elastic resistance exercise and pilates exercise on EMG. Five out of currently active highschool baseball player performed 5 times a week of elastic resistance exercise and pilates for 8 weeks, each for 100 minutes. They demonstrated significant increase in EMG after 8 weeks of exercise. Especially, in extensor carpi radialis brevis and flexor carpi radialis of fore arm, they demonstrated significant increase of inning figure after exercise. These results suggested that elastic resistance exercise and pilates exercise can improve pitching ability of baseball player according to inning.

• Elastomers and Composites
• /
• v.50 no.3
• /
• pp.159-166
• /
• 2015

Silica which is used for reinforcing filler in tire industry is widely known as eco-friendly material exerting $CO_2$ reduction effect through decrease of rolling resistance and improvement of wet grip. Generally silica is classified as a highly polar filler because it contains a large number of silanol (Si-OH) group on its surface. And also silica gives a lower reinforcing effect than carbon black due to its poorer rubber-filler interaction. Therefore silica is treated with silane coupling agent or activator, then following the conventional rubber blend method, vulcanized sheets were prepared using a hot press, and cure characteristics, mechanical properties and abrasion resistance of the test specimens were investigated. It was found that with an increase in the silane coupling agent content the tensile strength, 300% modulus and abrasion resistance increased while Mooney viscosity decreased and crosslink density slightly increased with an increase of activator.