• 한국도로학회논문집
• /
• 제8권2호
• /
• pp.13-22
• /
• 2006

Surface fog coating methods to porous pavements with a polymer, that contains MMA as a main ingredient, are being widely used in Japan and called 'Top-Coat Processes'. They have lots of effects such as to prevention of the pavement void choking, improvement of the water permeability of the pavements and so on. The purpose of this research is to show the characterization of the polymer to optimize the functions of the polymer fog-coat methods. This study focused on the difference of 'wetting' by water among polymers used for the fog coatings, and calculation the surface free energy from the water contact angle on each material. At the end, the water permeability test were conducted using porous asphalt mixtures that were coated with several kinds of polymers. The permeability was also measured on the specimens that were forcibly choked by muddy water and the resistance to choking was compared. It is concluded that the reduction of the surface free energy between water and a polymer improves the life of the permeability functions of porous pavements. Improvement of water permeation capacity and void-blocking controlling effects can be quantitatively evaluated using the interfacial tension ($\gamma$sl) with water for the coating material (high-viscosity asphalt and hardening resin binder). Consequently, the smaller the $\gamma$sl of the coating material the higher the water permeation capacity and void-blocking controlling effects of the porous asphalt pavements.

• 한국응용과학기술학회지
• /
• 제38권1호
• /
• pp.178-185
• /
• 2021

본 연구에서는 폴리비닐알콜(PVA)와 폴리프로필렌글리콜(PPG)기반의 창상피복용 수분산 폴리우레탄수지를 합성하였으며, 시료의 물리적 특성을 필름 시료와 피혁(Full-Grain) 표면에 코팅을 하여 물리적 특성 변화를 연구하였다. 인장강도의 경우 PVA가장 적게 반응된 PUD-PA1 2.00 kgf/㎟ 으로 가장 높은 저항성을 보였으며. 마찬가지로 연실율은 PVA가장 적게 반응된 PUD-PA1가 554%로 높게 측정되었다. 내마모성 측정 결과 PVA 반응이 증가함에 따라 표면의 강도나 낮게 36.77 mg.loss로 감소됨을 알수 있었다.

• 한국응용과학기술학회지
• /
• 제34권1호
• /
• pp.83-90
• /
• 2017

Garment skin leather 표면 코팅에 사용된 폴리우레탄 수지는 polyethylene glycole(PEG)의 함유를 [NCO]/[OH] mole % 비로 달리하면서 합성하였으며, 합성된 폴리우레탄 수지의 기계적 특성은 SEM, FT-IR, UTM 등을 이용하여 측정하였다. 비이온성을 띄고 있는 PEG(poly ethylene glycol)의 [NCO]/[OH] mole % 비가 증가함에 따라 내굴곡성(건식, 습식)의 변화는 없었으며, 내마모도, 인장강도수치가 낮아짐을 알 수 있었다. 반대로 연신율 물성은 증가함을 알 수 있었다. 점도 변화 측정 결과에는 PEG의 [NCO]/[OH] mole % 증가에 따라 점도가 묽어짐을 알 수 있었다.

• 한국염색가공학회지
• /
• 제17권6호
• /
• pp.27-35
• /
• 2005

Conventional pad- dry-cure(thermo-fixation) process usually produces functional performance on both sides of a fabric. UV curing technique was applied to impart water- and oil-repellent finish effective only on the face of a PET knitted fabric. The preferential one-side coating, by virtue of the limited penetration of UV light, was achieved by W curing after padding of a fluorocarbon agent without special coating or printing equipments. The difference in the functional property of face and back sides was examined by measuring water and oil repellency at each side of the treated fabric. The influence of pre/post-irradiation dose and agent concentration on the performance of the finished fabrics were investigated. While increase in both resin concentration and post-irradiation did not have significant effect on the finish, UV pre-irradiation of PET fabrics caused remarkable influence presumably due to appropriate surface modification of PET fabrics required for facile wetting of the resin. The dimensional stability and color change of the UV cured fabrics measured by FAST and reflectance spectrophotometry showed significantly decreased color difference and increased percent extension compared with the samples pre-irradiated without agent application.

• 조명전기설비학회논문지
• /
• 제17권2호
• /
• pp.95-101
• /
• 2003

본 논문에서는 모의 GIS를 에폭시로 코팅하고, 금속이물 혼입시의 부분방전, 부상전압, 절연파괴전압 등을 측정하여, 코팅하지 알았을 경우와 비교 분석하였다. 또한, 여러 경우의 절연사고를 모의하기 위해, SF$_{6}$/$N_2$가스 혼합비, 금속이물의 재질, 직경, 코팅두께, 압력 등을 변화시키면서 전기적특성을 관찰하였다. 실험결과, 코팅두께가 증가할수록 부분방전개시전압이 증가하였으며, 부분방전의 크기는 감소하였다. 또한 철합금 파티클의 부상전압이 구리파티클보다 높았으며, 직경이 증가할수록 부상전압도 증가하였으며, 코팅두께가 두꺼워질수록 절연파괴 전압이 증가하였다. 이상의 연구결과 GIS를 에폭시로 코팅함으로써 절연성능을 향상시킬 수 있음을 확인하였다.

• 한국표면공학회지
• /
• 제41권6호
• /
• pp.312-324
• /
• 2008

In this study, the functional property as a super abrasive material was secured for CBN powder by the electroless Ni-P plating on the surface of the particle. The plating solution has been prepared to control the surface morphology by regulating surfactants and process conditions. The effects of processing parameters on the surface morphology of CBN powder was discussed. The results are summarized as follows; A stable plating tendency was achieved from 1 hour after quantitatively dropping reducing agent. It was observed that more than 50% of the weight gain was obtained by Ni-P coating on the surface of CBN super abrasive powder. The morphology of the Ni-P coating layer is consisted of botryoidal and spiky type and it could be controlled by regulating processing parameters. Superior characteristic in terms of surface morphology was found in the nonionic surfactant XL-80N. It was found that XL-80N considerably decreased surface tension of CBN powder and Ni-P alloy surface then enhance wettability as well as plating rate. Metal coated CBN powder as a raw material of resin bond wheel has been developed through this investigation.

• 한국표면공학회지
• /
• 제50권6호
• /
• pp.480-485
• /
• 2017

Soft mold imprinting method that uses nanostructured polymer mold was investigated for anti-reflection film fabrication. The nanostructured soft mold was polyethylene terephthalate(PET) irradiated by oxygen ion beams. The collisional energy transfer between oxygen ion and the polymer surface induced cross-linking and scission reactions, resulting in self-organized nanostructures with regular patterns of the wavenumber of $5{\mu}m^{-1}$. Post processes including ultra-violet curable resin coating and delamination fabricated anti-reflection films. The imprinted resin surface also showed the consistent wavenumber, $5{\mu}m^{-1}$. Pristine PET, oxygen ion beam treated PET, and imprinted replica sample showed total transmittance of 91.04, 93.25, and 93.57-93.88%, respectively.

• 공업화학
• /
• 제25권4호
• /
• pp.352-356
• /
• 2014

${\alpha},{\omega}$-Aminopropylpolydimethylsiloxane을 bisphenol-A diglycidyl ether (DGEBA)계 이관능성 에폭시 수지와 반응시켜 polydimethylsiloxane (PDMS)의 양 말단에 에폭시가 도입된 실리콘 변성 에폭시 수지(EMPDMS)를 제조한 다음 alkylesteraminopropyl alkoxy silane (XD 5607)을 반응시켜 PDMS가 도입된 에폭시 hybrid 화합물(EMPDMSH)을 제조하고 이를 FT-IR, $^1H$-NMR 및 $^{29}Si$-NMR로 구조를 확인하였다. EMPDMSH base 수지에 용매를 혼합하여 코팅 액을 제조하였으며, 이를 에폭시/유리 섬유 복합재료로 얻어진 필름에 도포하고 경화시킨 후 base수지 중에 함유된 PDMS의 함량에 따른 물성을 측정하였다. 코팅 면의 접촉각을 측정한 결과 기존의 에폭시 수지로 코팅하여 얻은 코팅 면에 비해 접촉각이 $41^{\circ}$에서 $71^{\circ}$로 약 $30^{\circ}$정도 증가되고 있어 코팅 면에 PDMS가 나타나 있음을 확인할 수 있었다. 또한 접착력 및 표면 평활도 개선효과 측정 결과 에폭시 자체 코팅 액이나 일반적으로 많이 사용되고 있는 아크릴계 코팅 액 보다 5B 등급의 뛰어난 접착력을 나타내었고 평활도 개선 효과도 우수함을 나타내었다.

• 한국세라믹학회지
• /
• 제36권5호
• /
• pp.513-520
• /
• 1999

Alumina-coated SiC whiskers wee prepared by the calcination (1150$^{\circ}C$, 1h, Ar) of the alumina hydrate layer which was precipitated homogeneously on whisker surface from a solution of Al2(SO4)3 and urea as a precipitant. In addition carbon coated SiC whiskers were prepared by the pyrolysis (1000$^{\circ}C$, 4h Ar) of phenolic resin coated whisker. The effects of coating conditions on the thickness and morphology of the coated layers were examined by SEM and TEM. It was found that Al2O3-coating layers become thinner and more uniform with decreasing the Al2(SO4)3 concentration. Thin (0.075-0.1$\mu\textrm{m}$) and uniformly alumina-coating layers were obtained at the Al2(SO4)3 concentration 0.010mol/l. On the other han carbon-coating layers were uniform but very thin (5-16 nm) in thickness. For thicker carbon-coating layers ethanol as a disperse medium was found to be more efficient compared tousing acetone.

• Corrosion Science and Technology
• /
• 제22권2호
• /
• pp.99-107
• /
• 2023

Layered silicate clay montmorillonite (MMT) has been used in nanocomposite coating to improve corrosion protection by reinforcing the barrier property. The better dispersion of MMT in the coating produces a higher barrier effect. Pretreatment with MMT could favor the delamination of clay platelets, facilitating MMT dispersion in the coating. In the present work, a montmorillonite/silica (MMT/Si) composite was prepared by the in situ sol-gel method. x-ray diffraction measurements and field-emission scanning electron microscopy observations showed silica crystal formation and increased basal spacing between the MMT platelets. Composite MMT/Si particles were introduced in an epoxy resin to reinforce the corrosion protection of the coating applied on the AA2024 surface. Electrochemical impedance spectroscopy (EIS) was performed to characterize the protective property of the coating. The results demonstrated the high barrier effect of the coating containing 5 wt% of MMT/Si. Adhesion evaluation after a salt spray test exhibited a high adherence to the epoxy coating containing MMT/Si.