• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.6
• /
• pp.78-87
• /
• 2013

Even though the notice No. 2010-11 of the Ministry of Food and Drug Safety Administration that has been applied to analyze the content of the water soluble residue eluted from multi-layer paperboard was abolished in 2011, its application for the analysis on evaporation residue is still valid. There are very high possibilities that the noticed existing method gives the misleading result on the evaporation residue due to the water soluble starch eluted from the multi-layer paperboard. The quantitative analysis on water-soluble residue with starch content correction has been carried in the study using UV/Vis spectroscopy and HPLC. The UV/Vis spectroscopy absorbance analysis showed the large amount of the oxidized starch obtained from the aqueous residue eluted out of the multi-layer paperboard after the iodine, ${\alpha}$-amylase reaction, and starch hydrolysis. The residual content decreased by the correction through the enzyme hydrolysis.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.3
• /
• pp.183-191
• /
• 1991

A study was conducted to determine the influence of soil chemical properties on the distribution and forms of cadmium (Cd), lead (Pb), copper(Cu) and Zinc(Zn) in paddy soils near zinc mines. A sequential extraction procedure was used to fractionate the heavy metals in soils into the designated from of water soluble, exchangeable, organically bound, oxide/carbonate, and sulfide/residual. The predominant form of Cd, Pb, Cu and Zn in the soils was found to be sulfide/residual form. Oxide/carbonate Cd and Pb and organically bound Cu were high, while exchangeable Pb and Cu were very low. Water soluble Cd, Pb and Cu were not detected in the soils. The percentages of the heavy metals content in exchangeable fractions were inversely correlated with those in sulfide/residual fractions in the soils. Exchangeable Cd and Zn and the oxide/carbonate Pb were shifting to the sulfide/residual form with soil depth and the chemical forms of Cu were not changed. Organically bound Cu was positively correlated with soil organic matter content but Cd, Pb and Zn were not. The percentages of Cd, Pb and Zn content in exchangeable forms decreased with soil pH, while those in oxide/carbonate and sulfide/residual forms increased with soil pH. The amounts of oxide/carbonate and sulfide/residual forms of pb were higher than those of Cd and Zn at same soil pH.

• International Journal of Concrete Structures and Materials
• /
• v.7 no.1
• /
• pp.61-69
• /
• 2013

This paper discusses the properties of RCA, the effects of RCA use on concrete material properties, and the large scale impact of RCA on structural members. The review study yielded the following findings in regards to concrete material properties: (1) replacing NA in concrete with RCA decreases the compressive strength, but yields comparable splitting tensile strength; (2) the modulus of rupture for RCA concrete was slightly less than that of conventional concrete, likely due to the weakened the interfacial transition zone from residual mortar; and (3) the modulus of elasticity is also lower than expected, caused by the more ductile aggregate. As far as the structural performance is concerned, beams with RCA did experience greater midspan deflections under a service load and smaller cracking moments. However, structural beams did not seem to be as affected by RCA content as materials tests. Most of all, the ultimate moment was moderately affected by RCA content. All in all, it is confirmed that the use of RCA is likely a viable option for structural use.

• Journal of Korean Society for Quality Management
• /
• v.45 no.4
• /
• pp.769-780
• /
• 2017

Purpose: The aim of this study is to conduct a survey of dimethylformamide(DMF) content in polyurethane(PU)-based consumer products and provide the information for the PU manufacturer and company to prepare a countermeasure for improving the quality competitiveness. Methods: This study selected PU-based consumer products(toddler shoes, children's bag, children's play mat, safety gloves), which is closely used in everyday life, and analyzed the residual DMF content in the consumer products. Results: In this study, it was confirmed that the average DMF content of toddler shoes, children's bag, children's play mat and safety gloves are 38 ppm, 119 ppm, 396 ppm and 826 ppm, respectively. In addition, most of the samples were found to meet the internationally accepted standard of 1,000 ppm and the DMF contents were reduced from at least 63 % to 85 % with a single washing process. Conclusion: The domestic PU manufacturers should seek ways to reduce the DMF through their production facility applications and introducing new materials such as water-soluble PU, and preparing the process development for their quality competitiveness.

• The Journal of Engineering Geology
• /
• v.15 no.1
• /
• pp.29-39
• /
• 2005

For detecting a ground contamination survey, soil sampling method have been used a drilling or coring technique in general. However these methods are very difficult to systematically real-time monitoring of variation of contamination degree in field. ]'n this research frequency Domain Reflectometry (FDR) system was suggested and carried out to experimental approaches for determination of oil contamination on surface and underground. Experimental method using FDR method was discussed with feasibility of measurement in the laboratory column test. It is determined to degree of oil contamination due to response of dielectric constant re-lated with volumetric water content(θ/sub w/) and volumetric oil content( θ/sub al/ ) of saturated and unsaturated soil media. And physical properties such as effective porosity and oil residual ratio of saturated soil media were also measured through real-time monitoring works using installed FDR measurement sensors, which are defected characteristics of oil movement in the saturated soil media under the soil column tests. In the results of these experiments, a range of effective porosity was estimated to about 0.35 compared with initial porosity 0.40 of manufactured saturated soil media, which is also calculated to about 87.5% to the ratio of initial porosity to effective porosity. Finally oil residual ratio which is compared with volumetric water content and volumetric oil content was calculated about 62.5%.

• Resources Recycling
• /
• v.7 no.1
• /
• pp.41-49
• /
• 1998

This papcr covcrs ihe recovery process of aluminum coagulant by acidic exlraclion which can develop the dewaterability'of residual sludge solids and ihc reduclion ot sludge valumc and mass. Simultmeously, variables affecting acidic extaction of aluminum arc discussed It is represented that the characteristics of recovcrcd coagulant is assessed mth rcspcct to aluminum content. coagulalion effeaiveness, and trace contaminants. The treatment methods of residual sludge solid following acidic extraction arc also d~scussed. Fillally, we suggest some cases in which the results from laboratory can he applied to the fullscale operation and future domestic mosoect of it.

• Geomechanics and Engineering
• /
• v.28 no.6
• /
• pp.599-611
• /
• 2022

Tendon reinforced cemented soil is applied extensively in foundation stabilisation and improvement, especially in areas with soft clay. To solve the deterioration problem led by steel corrosion, the glass fiber-reinforced polymer (GFRP) tendon is introduced to substitute the traditional steel tendon. The interface bond strength between the cemented soil matrix and GFRP tendon demonstrates the outstanding mechanical property of this composite. However, the lack of research between the influence factors and bond strength hinders the application. To evaluate these factors, back propagation neural network (BPNN) is applied to predict the relationship between them and bond strength. Since adjusting BPNN parameters is time-consuming and laborious, the particle swarm optimisation (PSO) algorithm is proposed. This study evaluated the influence of water content, cement content, curing time, and slip distance on the bond performance of GFRP tendon-reinforced cemented soils (GTRCS). The results showed that the ultimate and residual bond strengths were both in positive proportion to cement content and negative to water content. The sample cured for 28 days with 30% water content and 50% cement content had the largest ultimate strength (3879.40 kPa). The PSO-BPNN model was tuned with 3 neurons in the input layer, 10 in the hidden layer, and 1 in the output layer. It showed outstanding performance on a large database comprising 405 testing results. Its higher correlation coefficient (0.908) and lower root-mean-square error (239.11 kPa) were obtained compared to multiple linear regression (MLR) and logistic regression (LR). In addition, a sensitivity analysis was applied to acquire the ranking of the input variables. The results illustrated that the cement content performed the strongest influence on bond strength, followed by the water content and slip displacement.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1140-1147
• /
• 2005

The objective of this study was to identify the effect of the degree of saturation on the resilient modulus of cohesive soils as subgrade. Six representative cohesive soils representing A-4, A-6, and A-7-6 soil types collected from road construction sites across Ohio, were tested in the laboratory to determine their basic engineering properties. Resilient modulus tests were conducted on unsaturated cohesive soils at optimum moisture content, and samples compacted to optimum conditions but allowed to fully saturate. The subgrade compacted at optimum moisture content may be fully saturated due to seasonal change. Laboratory tests on fully saturated cohesive soils showed that the resilient modulus of saturated soils decreased to less than half that of soil specimens tested at optimum moisture content. The reduction of resilient modulus would possibly be caused by the buildup of pore water pressure. In resilient modulus testing performed in this study on saturated samples, pore water pressure increases were observed. Pore water pressure and residual pore water pressure gradually increased with an increase in deviator stress.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.11
• /
• pp.87-99
• /
• 2012

Targeting 9 types of rocks, which have high frequency of excavation, the researcher has analyzed decreasing behaviors of elastic modulus due to water content. The elastic modulus decreasing behaviors have been classified into 5 steps by uniaxial compressive strength. The results indicate that all of 5 sedimentary rocks and andesite show single decreasing behavior and granite, rhyolite, and gneiss demonstrate another decreasing behavior. Moreover, sensitivity of water content in granite, rhyolite, gneiss is almost twice as fast as that of the other rocks and their residual value of elastic modulus is very low.

• Food Science of Animal Resources
• /
• v.31 no.1
• /
• pp.122-128
• /
• 2011

This study was conducted to investigate the antioxidant effects, total plate count (TPC), and residual nitrite content of emulsified sausage with added mugwort during cold storage. The sausages were of five types: nothing added (control), mugwort powder added (T1), mugwort juice added (T2), mugwort ethanol extract added (T3), and mugwort hot water extract added (T4). Each sausage type was tested in triplicate and assigned to one of five storage periods: 0, 1, 2, 3, or 4 wk. As storage time increased, the presence of mugwort resulted in decreased pH, residual nitrite content, and meat color (CIE $L^*$ and $b^*$) and increased thiobarbituric acid reactive substance (TBARS) and TPC values. Values for pH, TBARS, residual nitrite, and TPC decreased significantly after adding mugwort compared with the control (p<0.05). Among all treatments, T3 was significantly (p<0.05) more effective in delaying lipid oxidation and microbial activity. The CIE $L^*$ and $b^*$ decreased significantly with the addition of mugwort relative to the control. In conclusion, the results demonstrate that adding an ethanol extract of mugwort (T3) to emulsified sausages tended to improve antioxidant and antimicrobial effects and residual nitrite content during storage compared to the other treatment groups.