• Journal of the Korean Vacuum Society
• /
• v.11 no.2
• /
• pp.87-96
• /
• 2002

Outgassing from such sources as paints, coatings, adhesives and other non-metallic surfaces can contaminate satellites, especially second surface mirror and optical lens, it cause satellite to fail in own missions. The vacuum bake-out test using high temperature(more than $85 ^{\circ}C$)and high vacuum(less than $5.0{\times}1-^{-3}$ Pa) certify that the components of satellite work properly and can survive and operate in space environment like high vacuum. In the bake-out chamber installed at SITC of KARI, Rotary vacuum pump and Booster pump produce low vacuum of 5.0 Pa, and then two cryopumps produce high vacuum of below $5.0{\times}10^{-3}$ Pa. Also 48 ceramic heaters were provided to simulate high temperature. During the vacuum bake-out test, we detected contaminants using RGA(Residual Gas Analyzer) and measure the outgassing rate of the contaminant using the TQCM(Thermoelectric Quartz Crystal Microbalance). Also, IR/UV Spectrometer and witness plate be used to certify that the components were suitable for the spacecraft. This paper includes the preparation and procedures of the bake-out test for SAR(Solar Array Regulator) and MLI(Multi Layer Insulator), which were the components of the spacecraft. Especially, we discussed the methods and results of the contamination measurement. In the bake-out for SAR, the contamination was measured continuously although it was on the decrease from TQCM results. And RCA established that it is a highly polymerized compound. In the MLI bake-out using RGA and witness plate, we didn't detect any contamination materials.

• Journal of the Korean Geographical Society
• /
• v.39 no.6 s.105
• /
• pp.907-921
• /
• 2004

Lots of characteristics such as dwelling, neighborhood, and accessibility characteristics affect to the housevalue. Many researches have been done to identify values of each characteristic using hedonic technique. However, there is a limit to identify interaction of each characteristic and variation of each characteristic among the accessibility context. This paper has implemented the Expansion Method research paradigm to model the housevalue determination process in the city of Seoul. The findings of this paper have revealed the presence of contextual variations in the housevalue determination process. The initial model for housevalue reveals that as $F_1$ increases (i.e., larger the number of rooms/bathrooms, larger parking space) and/or $F_2$ increases (i.e., higher owner occupied housing units, higher apartment housing units) and/or $F_3$ increases, (i.e., higher the ratio of higher than college graduated households, 8 school zone, older housing units) the estimated housevalue increases. However, the above relationships drift across their respective contexts. The houses which have negative $F_1$ value, the housevalue does not fluctuate according to the distance to the city center or subcenters. However, the houses which have positive $F_1$ value, the closer to the subcenters or shorter to the river, the higher the estimated housevalues. On the other hand, in areas far from the subcenters, the estimated housevalues does not fluctuate much according to the corresponding $F_2$ level. In areas close to the subcenters, the estimated housevalues vary tremendously according to the $F_2$ value. In the residual analysis, it is revealed that large apartment which are located in Kangnam, IchongDong, MokDong are underestimated. This paper has contributed to our understanding of the housevalue determination process by providing an alternative conceptualization to the traditional approach.

• Tunnel and Underground Space
• /
• v.20 no.5
• /
• pp.344-351
• /
• 2010

Slip along a frictional fracture can be approached as initiation and propagation of a mode II crack along its own plane. Fracture mechanics theories predict that under pure mode II loading initiation will occur when the energy release rate of the fracture attains a critical value ($G_{IIC}$), which is generally taken as a material property. For the past few years the rock mechanics group at Purdue University has investigated experimentally the dependence of $G_{IIC}$ on normal stress and on the frictional characteristics of a fracture. A number of experiments has been conducted first on acrylic, a material that, using photoelastic methods, allows visualization of the stress field ahead of the fracture tip; and later on gypsum, a rock model material with relatively low unconfined compression strength. The experimental investigation has been expanded to include other frictional materials with higher unconfined compression strength. Direct shear tests have been conducted on specimens made with cement paste. New observations together with previous experiments indicate that $G_{IIC}$ can only be considered a material property when the peak friction angle of the discontinuity is similar to the residual friction angle; otherwise the critical energy release rate increases with normal stress.

• Tunnel and Underground Space
• /
• v.33 no.3
• /
• pp.189-207
• /
• 2023

In the present study, the thermoshearing experiment on a rough rock fracture were modeled using a three-dimensional grain-based distinct element model (GBDEM). The experiment was conducted by the Korea Institute of Construction Technology to investigate the progressive shear failure of fracture under the influence of thermal stress in a critical stress state. The numerical model employs an assembly of multiple polyhedral grains and their interfaces to represent the rock sample, and calculates the coupled thermo-mechanical behavior of the grains (blocks) and the interfaces (contacts) using 3DEC, a DEM code. The primary focus was on simulating the temperature evolution, generation of thermal stress, and shear and normal displacements of the fracture. Two fracture models, namely the mated fracture model and the unmated fracture model, were constructed based on the degree of surface matedness, and their respective behaviors were compared and analyzed. By leveraging the advantage of the DEM, the contact area between the fracture surfaces was continuously monitored during the simulation, enabling an examination of its influence on shear behavior. The numerical results demonstrated distinct differences depending on the degree of the surface matedness at the initial stage. In the mated fracture model, where the surfaces were in almost full contact, the characteristic stages of peak stress and residual stress commonly observed in shear behavior of natural rock joints were reasonably replicated, despite exhibiting discrepancies with the experimental results. The analysis of contact area variation over time confirmed that our numerical model effectively simulated the abrupt normal dilation and shear slip, stress softening phenomenon, and transition to the residual state that occur during the peak stress stage. The unmated fracture model, which closely resembled the experimental specimen, showed qualitative agreement with the experimental observations, including heat transfer characteristics, the progressive shear failure process induced by heating, and the increase in thermal stress. However, there were some mismatches between the numerical and experimental results regarding the onset of fracture slip and the magnitudes of fracture stress and displacement. This research was conducted as part of DECOVALEX-2023 Task G, and we expect the numerical model to be enhanced through continued collaboration with other research teams and validated in further studies.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.58.2-58.2
• /
• 2015

We investigate the decaying incompressible MHD turbulence by including the effect of the expansion and contraction of background medium. In such an environment, incompressible MHD turbulence has two kinds of time scale. One is the eddy turn-over time (teddy), the other is the expansion/contraction time (texp-cntr). The turbulence is expected to behave differently according to the relationship between the two time scales. For instance, for teddy < texp-cntr, the turbulence would be decay more or less as in a static medium. On the other hand, for teddy > texp-cntr, the effects of expansion and contraction would be dominant. We examine the properties of turbulence in these two regime cases. Based on it, we derive a scaling for the time evolution of flow velocity and magnetic field. (i) In the decay effect dominant case, the velocity and magnetic field scale as $\sqrt{{\rho}v}{\sim}a^{-3}$, $b{\sim}a^{-2.5}$(expanding media) and $\sqrt{{\rho}v}{\sim}a^{-2}$, $b{\sim}a^{-1.5}$(contracting media). The total energy and residual spectra follow the $E^T_k{\sim}k^{-5/3}$, $E^R_k{\sim}k^{-7.3}$ in the inertial range. (ii) In the expanding and contracting dominant case, the velocity and magnetic field scale as $\sqrt{{\rho}v}{\sim}a^{-2.5}$, $b{\sim}a^{-2}$ (expanding/contracting media). The Kinetic and magnetic energy spectra follow the $E^K_k{\sim}a^{-5}$, $E^M_k{\sim}a^{-4}$. We have confirmed that scaling of velocity and magnetic filed is almost the same from the analytic estimates and computational models

• The korean journal of orthodontics
• /
• v.46 no.4
• /
• pp.242-252
• /
• 2016

Objective: Orthodontic mini-implants (OMI) generate various horizontal and vertical force vectors and moments according to their insertion positions. This study aimed to help select ideal biomechanics during maxillary incisor retraction by varying the length in the anterior retraction hook (ARH) and OMI position. Methods: Two extraction models were constructed to analyze the three-dimentional finite element: a first premolar extraction model (Model 1, M1) and a residual 1-mm space post-extraction model (Model 2, M2). The OMI position was set at a height of 8 mm from the arch wire between the second maxillary premolar and the first molar (low OMI traction) or at a 12-mm height in the mesial second maxillary premolar (high OMI traction). Retraction force vectors of 200 g from the ARH (-1, +1, +3, and +6 mm) at low or high OMI traction were resolved into X-, Y-, and Z-axis components. Results: In M1 (low and high OMI traction) and M2 (low OMI traction), the maxillary incisor tip was extruded, but the apex was intruded, and the occlusal plane was rotated clockwise. Significant intrusion and counter-clockwise rotation in the occlusal plane were observed under high OMI traction and -1 mm ARH in M2. Conclusions: This study observed orthodontic tooth movement according to the OMI position and ARH height, and M2 under high OMI traction with short ARH showed retraction with maxillary incisor intrusion.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.459-464
• /
• 2003

Dentigerous cyst is a cyst arising by tissue fluid accumulation between the enamel and the residual enamel epithelium. It includes the crown of the impacted tooth and excludes the root. The treatments of the dentigerous cyst are enucleation, marsupialization, decompression, surgical excision and etc. In these cases children were evaluated for the chief complaints of the remained mandibular primary second molar. Each cases showed swelling on the buccal side of the primary secondary premolar. In the radiologic evaluation a radiolucent lesion including the crown of the mandibular secondary premolar was found, and it was diagnosed as dentigerous cyst. And the histopathologic examination showed the same result. Marsupialization was operated through alveolar socket and the alveolar socket was protected with vaseline gauze, the obturator combined with space maintainer was followed by the operation. After the operation, the impacted permanent tooth was showing faster eruption speed than the other normal teeth.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.11
• /
• pp.2577-2596
• /
• 2013

In this paper, we present an Energy-Aware Self-Stabilizing Distributed Clustering protocol based on message-passing model for Ad Hoc networks. The latter does not require any initialization. Starting from an arbitrary configuration, the network converges to a stable state in a finite time. Our contribution is twofold. We firstly give the formal proof that the stabilization is reached after at most n+2 transitions and requires at most $n{\times}log(2n+{\kappa}+3)$ memory space, where n is the number of network nodes and ${\kappa}$ represents the maximum hops number in the clusters. Furthermore, using the OMNeT++ simulator, we perform an evaluation of our approach. Secondly, we propose an adaptation of our solution in the context of Wireless Sensor Networks (WSNs) with energy constraint. We notably show that our protocol can be easily used for constructing clusters according to multiple criteria in the election of cluster-heads, such as nodes' identity, residual energy or degree. We give a comparison under the different election metrics by evaluating their communication cost and energy consumption. Simulation results show that in terms of number of exchanged messages and energy consumption, it is better to use the Highest-ID metric for electing CHs.

• Tunnel and Underground Space
• /
• v.28 no.5
• /
• pp.493-511
• /
• 2018

This paper deals with visual confirmation device for tensile force verification in order to cope with tensile force loss of ground anchor. Ground anchors are constructed to ensure the stability of social infrastructure facilities, but continuous loss of tensile force is seriously concerned about safety of the facilities. This requires the maintenance of the anchors, but the current measuring of residual tensile force is done by sampling, taking into account economic aspects, which limits precision. In this paper, conducted a conceptual design, tensile experiment, and field test for the purpose of developing an anchor tensile force visual device to check the tensile force of the anchors.

• The Journal of the Korea Contents Association
• /
• v.17 no.8
• /
• pp.130-143
• /
• 2017

This study examines the theoretical framework of "B" local union, which conducts "class-oriented" labor movements in contemporary Japan. "Class-oriented" labor movements are active, while they have been residual on the margins of Japanese society and the country's labor movement situation. This research examines a theoretical framework for "class-oriented" labor movements and investigates Williams' "structure of feeling." First, the "structure of feeling" concept is examined. Second, the study compares several theories on the working class of Marxism and alternative subjects of "linguistic turn." Third, this study redefines the "structure of feeling" in terms of the case of "B" local union. The results show that "collective workers-individualize workers" and "workers-non-workers" of "B" local union establish their own labor movements on the material or immaterial space and consider their "structure of feeling" as the "negotiation and contradiction on the class-orientation." Consequently, this study offers a model of their "structure of feeling."