• 제목/요약/키워드: Residual solvents

검색결과 66건 처리시간 0.026초

고비점 용제와 산 촉매에 의한 목질 바이오매스의 탈리그닌 (Delignification of Lignocellulosic Biomass with High-Boiling Point Solvent and Acidic Catalyst)

  • 김강재;정진동;정수은;홍성범;엄태진
    • 펄프종이기술
    • /
    • 제48권1호
    • /
    • pp.119-126
    • /
    • 2016
  • In this study, we separated the lignin from the wood by using the high boiling point solvent for developing more environmental friendly pulping method. High boiling point solvents as Ethers, glycols and ketones were used to remove the lignin in the pine wood meals. The Yield and lignin content of residual wood meals was reduced according to the input of the catalyst. Me-C, E-Ca, TEG and MIBK had the best delignification rate of 9 kinds of high-boiling point solvents. At the hydrolysis ratio of the selected solvents, The TEG was highest remain ratio of carbohydrates and the E-Ca was lowest remain ratio of lignin. And the Me-C was most excellent lignin hydrolysis ratio at the low catalyst. The selectivity of delignification of Me-C, E-Ca, TEG and MIBK solvents were 49.6, 49.9, 53.8 and 53.1%, respectively, and its values were similar to those of the commercial Kraft Pulp.

잔류 유기 용매가 모델 세포 지질막의 상전이, 상전이 엔탈피 및 상전이 온도에 미치는 영향 (Effects of Residual Solvents in the Phase Transition, Transition Enthalpy, and Transition Temperature of Phospholipid Membranes)

  • 안은설;최재순;이동국
    • 대한화장품학회지
    • /
    • 제40권2호
    • /
    • pp.163-170
    • /
    • 2014
  • Phosphatidylcholine (PC) 인지질로 이루어진 모델 지질막은 세포막을 대신하여 지질막과 여러 분자간의 상호 작용을 연구하는 생물리 연구에 흔히 이용된다. 이들 모델 지질막을 제조하는 과정에서 지질 분자나 지질막과 작용하는 분자를 용해하는데 여러 가지 유기 용매가 이용된다. 용해 과정에 사용된 용매는 물론 제거되거나 소량 사용되기 때문에 실험 결과에 미치는 영향이 미미한 것으로 간주되어 보통 무시된다. 하지만 용매의 종류에 따라 소량의 용매가 용질 분자에 남아서 실험 결과에 영향을 미칠 수 있다. 본 연구에서는 시차열분석기와 인($^{31}P$) 고체 핵자기 공명 실험을 통하여 유기 용매가 지질막의 상변이와 지질막의 물리적 성질에 미치는 영향을 조사하였다. 클로로폼에 용해한 지질의 경우 비교적 쉽게 제거되었으며, 에탄올, trifluoroethanol(TFE) 또는 trifluoroacetic acid (TFA)에 용해한 분자들의 경우 용질에 잔류하여 지질과 용질의 상호작용시 지질의 물리적 성질에 영향을 미치는 것이 확인되었다. 따라서 지질막과 상호작용하는 분자들의 연구에서 용매의 선택이 중요하며 비록 미량이 사용되었을지라도 시료 제조와 실험 결과의 해석에 각별한 주의가 필요함을 보여 준다.

기체 크로마토그래피를 이용한 유기 염소계 잔류 농약 동시 분석 방법 개발에 관한 연구 (Study on the Development of Simultaneous Analytical Method for the Residual Organic Chloride Pesticides by Gas Chromatography)

  • 김운성;이봉헌;박흥재
    • 한국환경과학회지
    • /
    • 제5권5호
    • /
    • pp.561-567
    • /
    • 1996
  • 31 종류의 유기 염소계 잔류 농약을 동시에 분석하는 기체 크로마토그래피 방법을 개발하기 위하여 본 연구를 수행하였다. 준비된 분석 시료를 ECD (electron capture detector)로 Ultra-2 column의 GC (gas chromatography)에 주입하였다. Column 충진 물질을 florisil과 alumina N으로 변화시키면서 잔류 용액을 column에 loading하고 용출 용매로는 ether . benzene(2 : 8) solution, hexane . benzene(1 . 1) solution, dichloromethane, acetone 및 methanol을 사용하였다. 분석 결과 column 충진 물질로 florisil을 사용하였을때 (첫째 조건) 6종류의 유기 염소(dichlorfluanid, captan, chlorofenvinfos, folpet, captafol과 dicofol)가 검출되지 않았다. 이 조건에서 dichloromethane과 methanol을 용출 용매로 첨가하였을때는 (둘째 조건) 첫째 분석 조건하에서 검출되지 않았던 6종류의 유기 염소가 검출되었고 thrin계 pesticides, 특히 captan과 captafol의 recovery가 증가하였다(첫째 조건에서와 마찬가지로 충진 물질로 florisil을 사용). 그러나 BHC(benzene hexachloride) 화합물의 recovery는 감 소하였다. 한편 alumina N을 column 충진 물질로 사용하였을 경우에는 dichlorfluanid, chlorofenvinfos, folpet 및 dicofol의 recovery가 증가하였으며 aldrin도 그러하였다. 하지만 captan과 captafol은 그렇지 못하였다. Thrin계 pesticides, captan 및 captafol을 동시에 검출하기 위하여 florisil과 alumina N을 충진 물질로 동시에 사용하고 n-hexane을 충진시켜 용출시킨 결과, captan과 captafol이 검출되지 않았는데 이는 column이 충분히 활성화되지 않았기 때문이라고 생각된다. Column(florisil과 alumina N을 충진 물질로 동시 사용)을 충분히 활성화시키고 여러가지 용출 용매를 사용하여 불순물을 제거하였을때 분석 결과가 가장 우수하였다(31 종류의 유기 염소계 잔류 농약이 sharp하게 검출되었고 높은 감도를 나타내었다).

  • PDF

기체크로마토그래프법을 이용한 [F-18]FDG의 잔류용매 분석 (Analysis of Residual Solvents of [F-18]FDG Using Gas Chromatography)

  • 김동일;이일중;김시활;지용기;석재동
    • 핵의학기술
    • /
    • 제15권2호
    • /
    • pp.26-29
    • /
    • 2011
  • [F-18]FDG 제조 후 품질관리를 수행하는데 있어서 품질관리 항목 중 잔류용매 시험은 최종 [F-18]FDG 바이알에 잔류하는 유기용매를 측정하기 위한 것이다. 본 연구는 자동합성장치에 따른 최종 [F-18]FDG 바이알에 잔류하는 유기용매의 종류를 파악하고, 잔류량을 측정하고자 하였다. 불꽃이온화 검출기(Flame Ionization Detector)가 장착된 기체크로마토그래프(Agilent Technologies 7890A)를 이용하여 제조 후 일주일 이내의 밀봉 바이알에 보관한 [F-18]FDG를 기체크로마토그래프에 $1.0{\mu}L$ 씩 주입한 후 각 피크영역을 구하였다. FASTlab은 평균이 에탄올 72 ppm, 아세토니트릴 54 ppm, 초산 1030 ppm으로 나타났으며, TRACERlab MX는 평균이 에탄올 439 ppm 및 아세토니트릴 79 ppm이 검출되어 모두 의약품 잔류용매기준의 허용량 이내에 있었다. [F-18]FDG 주사액에 있는 잔류용매는 모두 허용량 이내로 환자검사에 사용하는데 적합하였다. 또한 최종 [F-18]FDG 바이알에 있을 수 있는 초산의 최대 이론량은 1167 ppm으로 따로 검량을 하지 않아도 되는 것으로 나타났다. 이 결과에서는 자동합성장치에 따라 방사성의약품의 잔류용매의 종류 및 양이 다를 수 있음을 보였다.

  • PDF

Purity assignment of 17α-hydroxyprogesterone by mass balance method to establish traceability in measurement

  • Lee, Hwa Shim;Park, Su Jin
    • 분석과학
    • /
    • 제32권6호
    • /
    • pp.225-232
    • /
    • 2019
  • Traceability establishment in chemical measurements is a like a linkage established through an unbroken chain from the measured results to the international system (SI) of units. The primary process for traceability establishment is the purity assignment of a target material to be measured. In this study, we studied the purity assignment of 17α-hydroxyprogesterone (17-OHP). The presence of 17-OHP is indicative of congenital adrenal hyperplasia (CAH) and it builds up due to the deficiency of 21-hydroxylase and 11β-hydroxylase enzyme in the human blood. The purity assignment of 17-OHP was performed by the mass balance method, in which the impurities are categorized into four classes: total related structural impurities, water, residual organic solvents, and nonvolatiles/inorganics. The total related structural impurities were characterized by HPLC-UV; water content was determined by Karl-Fisher coulometer; and the total residual solvents and nonvolatiles/inorganics were determined by TGA. The purity of 17-OHP from a commercial manufacturer was calculated as 993.30 mg/g, and the expanded uncertainty was 0.58 mg/g. The proposed method was validated by uncertainty evaluation and comparing with the actual value of purity.

증기(蒸氣)-추출(抽出) 방법(方法)에 의한 목질계(木質系)로부터의 조사료(粗飼料) 생산(生産) (I) -용매(溶媒) 추출(抽出)이 폭쇄재(爆碎材) 및 열해섬(熱解纖) 펄프에 미치는 영향(影響)- (Ruminant Feed Production from Wood by Steaming-Extraction Method (I) -Effect of Solvent Extraction on Asplund Pulp and Steam Exploded Wood-)

  • 백기현;강진하;김동호
    • Journal of the Korean Wood Science and Technology
    • /
    • 제20권4호
    • /
    • pp.65-72
    • /
    • 1992
  • Steam defiberated pulp and steam exploded wood(birch chip) were extracted with solvents (hot-water, 1% NaOH, MeOH, hot water, 1% NaOH). The properties of residual fiber were examined for the utilization as ruminants feed. The digestibility is 38% in steam defiberated pulp(10kg /$cm^2$-15min) and 62-77% in exploded wood(17-18kg/$cm^2$-2~10min), respectively. The more steam pressure and time increase, the more the digestibility increase. The sugars obtained from extractives is amount from 7% to 13% in asplund pulp and from 7% to 10% in exploded pulp. The sugars was mainly composed of 70-80% xylose. The digestibility of residual fiber which is extracted with solvents is low than these of original fibers. Considering the yield and digestibility as ruminant feed, exploded pulp under 17kg /$cm^2$ for 10min has the best efficiency. The exploded wood gives 75.3% on yield(O. D. chip) and 48% on the digestibility.

  • PDF

Headspace 법을 사용한 유기농업자재 중 잔류 유기용매 분석 (Analysis of Residual Organic Solvent in Environmentally-friendly Farming Materials with Headspace Method)

  • 최근형;공승헌;박병준;문병철;김진효
    • 농약과학회지
    • /
    • 제20권2호
    • /
    • pp.128-132
    • /
    • 2016
  • 본 연구에서는 유기농업자재 중 잔류 휘발성 유기용매의 정성 및 정량분석을 위해 Headspace-GC 분석법을 matrix 조성을 달리하여 검출능을 중심으로 시험하였다. Headspace sampler내 흡습제처리 혹은 DMSO molar ratio를 증가시키는 방법을 통해 친수성기를 갖는 유기용매의 분석능이 최대 715% 향상되었으며, 특히 농자재의 보조제로 많이 사용되는 계면활성제의 경우 시료 중 농도가 계면활성제의 종류보다 유기용매 분석능에 미치는 영향이 큰 것을 확인할 수 있었다(68.5-179.1%). 특히 병해충 관리용 유기농업자재의 보조성분 및 함량이 정확히 공개되지 않은 상황에서 유기용매의 함량 정량분석을 위해서는 각각의 분석시료마다 matrix-matched calibration을 통한 정량 분석으로의 접근이 검토되어야 할 것으로 판단된다.

Preparation of New Polyenaminonitriles Containing Cyclic and Methylene Units and Their Thermal Properties

  • Cho, Jeong-Hyun;Gong, Myoung-Seon
    • Macromolecular Research
    • /
    • 제8권5호
    • /
    • pp.209-214
    • /
    • 2000
  • Polyenaminonitriles containing cycloaliphatic and aliphatic units were prepared by interfacial or solution polymerization reaction of p-bis(1-chloro-2,2-dicyanovinyl) benzene (1) with 4-aminobenzyl-amine, 1-(2-aminoethyl)piperazine, 2-(aminomethyl)pyrrolidine and 4-(aminomethyl)piperidine. The chemical structure of the polymers was confirmed through a syntheses of the model compound. The resulting polymers possessed inherent viscosities of 0.29∼0.62 dL/g and they were easily soluble in polar aprotic solvents and common organic solvents. Thermal properties of the polymers such as curability and stability were studied by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and infrared spectroscopy. The polymers exhibited a large exotherm in DSC analyses and underwent a curing reaction around 340-370$\^{C}$ to form insoluble materials. The polymers showed 70-80% residual weight at 600 $\^{C}$ under nitrogen.

  • PDF

Preparation of Polyesters Containing Enaryloxynitrile Moiety and Their Thermal Properties

  • Moon Sung-Hee;Lee Seung-Jae;Kim Jin-Bong;Gong Myoung-Seon
    • Bulletin of the Korean Chemical Society
    • /
    • 제15권12호
    • /
    • pp.1089-1093
    • /
    • 1994
  • Polyesters containing enaryloxynitriles moiety have been newly prepared from p-bis[1-[4-(3-hydroxypropyl)phenoxy]-2,2-dicyano vinyl]benzene (3) and common diols with terephthaloyl chloride. The copolyesters have a good solubility in common organic solvents as well as polar aprotic solvents. They undergo a curing reaction at around 350 $^{circ}C$ and show a 50-60${\%}$ of residual weight at 500 $^{circ}C$. The enhanced thermal stabilities were due to the intramolecular cyclization or intermolecular cross-linking reaction of the dicyanovinyl group incorporated into polyester by copolymerization.