• Journal of Life Science
• /
• v.9 no.2
• /
• pp.194-200
• /
• 1999

Grinding aid is a necessary unit operation when the raw materials are handled in solid form, and the purpose is to improve the bioavailability by reducing the particle size. For the particle design of pefloxacin, the dry planetary ball-mill was used. With the drying process, 330 g of zirconia ball with its size of 2 mm in diameter and 10 g of pefloxacin were transferred to the pot and mixed well. The mixture was ground at 112 rpm (60 Hz) for 15, 30, and 60 min, respectively. The most satisfactory grinding products were generated at 15 min of grinding time for their particle size. The volume mean diameter $\X_50$ of the grinding products was 2.97 $\mu$m. X-ray diffraction (XRD), differential scanning calorimeter (DSC), and infrared spectroscopy (IR) patterns were relatively unchanged before pulverizing pefloxacin and in the progress of grinding. Thus, these results suggest that this pulverizing method can be used for grinding products without evident effect on stability of the drug pefloxacin. Dissolution test was carried out to set up the optimal detective condition against residual antibacteria of fish by HPLC. The grinding pefloxacin for 15 min is most effective in dissolution test.

• Journal of Food Hygiene and Safety
• /
• v.31 no.5
• /
• pp.319-326
• /
• 2016

Colistin is a last resort antimicrobial agent against multi-drug resistant Gram-negative bacteria. This study was conducted to develop an analytical method to determine colistin in fish and shrimp. The analytes were confirmed and quantified via liquid chromatography-tandem mass spectrometry (LC-MS/MS) in the positive ion mode using multiple reaction monitoring (MRM). The sample was extracted with acidified 5% methanol (containing 0.5% formic acid). Then, solid phase extraction (SPE) was used for cleanup. Matrix-matched calibration curves were linear over the calibration ranges (0.05-1.2 mg/kg) for all the analytes into blank sample with $r^2$ > 0.99. All the values fulfilled the criteria requested by the Codex guidelines. Average recoveries ranged from 85.9% to 107.9%. The repeatability of measurements, expressed as the coefficient of variation (CV, %), was less than 15%. The limit of detection (LOD) was 0.02 mg/kg, and the limit of quantitation (LOQ) was 0.05 mg/kg. This improved method showed higher accuracy and acceptable sensitivity to meet the CAC guideline requirements and is applicable for the analysis of residual colistin (A+B) in fish and shrimp.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.535-541
• /
• 2020

FCAW is used mainly in the welding of carbon steel and alloy steel because it can be welded in all positions and can obtain excellent quality at sites with variable working conditions. Recently, many studies in Korea have estimated the fatigue strength, residual stress, and deformation, and to develop a fillet welding process. On the other hand, there have been few studies of the mechanical properties based on the strength, macro and magnetic particle test results for fillet welding. This study shows the following results through fillet welding, macro testing and strength testing using SM490A (solid-structure rolled steel) for thick plates using SS400 (rolled steel) for the upper plate and FCAW. The hardness test, macro test and magnetic particle test were then conducted. The hardness tests showed that all result values were smaller than the KS B 0893 standard values of 350Hv. The macro-test showed that each type of welded part was in a normal organic state and that there were no internal errors, bubbles, or impurities on the front of the welded part. Therefore, there were no concerns about lamination. The magnetic particle examination showed no problems.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.2
• /
• pp.99-104
• /
• 2010

The purpose of this study is to develop Sewage Treatment Plant that treat sewage which occurred in ship using fixed media method and to consider applicable to the Pilot Scale device of the STP regulations in MLTM(Ministry of Land, Transport and Maritime Affairs) and MEPC(Marine Environment Protection Committee). In test results, pH geometric mean was 7.68, $BOD_5$(Biochemical Oxygen Demand) geometric mean was 7.28 mg/l, $COD_{cr}$(Chemical Oxygen Demand) geometric mean was 48.39 mg/l, TSS(Total Suspended Solid) geometric mean was 18.00/l, Residual chlorine geometric mean was 0.19 mg/l, and E. coli geometric mean was 1CFU/100 ml. In addition, about 97.4% of $BOD_5$ was reduced, the $COD_{cr}$ reduction averaged 96.4%and the TSS reduction averaged 97.6%. STP have been determined by the MLTM and MEPC regulation of the marine pollution prevention equipment for performance testing product.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.4
• /
• pp.33-40
• /
• 2006

Residual pesticides discharged from diffuse sources at agricultural area in association with suspended solid will be settled at downstream, and may degrade surface water quality. This research studied dechlorination kinetic of atrazine, one of triazine-category herbicide, using zero-valent iron (ZVI) in sediment. It can be observed from the experiments that buffer capacity of sediment helped pH maintained beutral, resulted in continuous dechlorination. Sediments were spiked with atrazine at 10, 30, and 50 mg atrazine/L of total sediment for batch experiments. Dechlorination constants were $1.38x10^{-1}/d$ for the initial concentration of 10 mg/L, $1.29x10^{-l}/d$ for 30 mg/L, and $7.43x10^{-2}/d$ for 50 mg/L while dechlorination constants of initial concentration of 50 mg/L without ZVI adding were estimated as $3.05x10^{-2}/d. Half lifes atrazine by ZVI were estimated as 5.03 d fur 10 mg/L, 5.38 d for 30 mg/L, and 9.33 d for 50 mg/L, respectively.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.4
• /
• pp.1-10
• /
• 2011

This study investigates the performance of composite (steel-concrete) frame structures through numerical experiments on individual connections. The innovative aspects of this research are in the use of connections between steel beams and concrete-filled tube (CFT)columns that utilize a combination of low-carbon steel and shape memory alloy (SMA) components. In these new connections, the intent is to utilize the recentering provided by super-elastic shape memory alloy tension bars to reduce building damage and residual drift after a major earthquake. The low-carbon steel components provide excellent energy dissipation. The analysis and design of these structures is complicated because the connections cannot be modeled as being simply pins or full fixity ones they are partial restraint (PR). A refined finite element (FE) model with sophisticated three dimensional (3D) solid elements was developed to conduct numerical experiments on PR-CFT joints to obtain the global behavior of the connection. Based on behavioral information obtained from these FE tests, simplified connection models were formulated by using joint elements with spring components. The behavior of entire frames under cyclic loads was conducted and compared with the monotonic behavior obtained from the 3D FE simulations. Good agreement was found between the simple and sophisticated models, verifying the robustness of the approach.

• Journal of Korean Society of Forest Science
• /
• v.105 no.2
• /
• pp.202-207
• /
• 2016

The effects of $SO_2$ generating pads ($SO_2$ 0, 0.5, 1, and 2 g/kg) on the quality of dried persimmons slices were investigated. The $SO_2$ generating pads for storage did not affect to weight, moisture loss rate, and soluble solid contents of dried persimmons. The color change(E) after storage for 12 weeks was the highest (value = 3.5) in control ($SO_2$ 0 g/kg), whereas that was the lowest (value = 2.6) under $SO_2$ 2 g/kg condition. When we measured the browning degree after 12 weeks, they showed O.D. 0.15, 0.14, 0.10, and 0.05 in serial dilution treated pads with $SO_2$ 0, 0.5, 1, and 2 g/kg, respectively. The decaying rate was the highest (9.0%) in control after 12 weeks storage, whereas it did not show any spoilage in $SO_2$ 2 g/kg treated condition for whole storage period. The concentration of residual $SO_2$ in dried persimmons was detected within a safe range of 3.3~97.0 ppm. Therefore, the shelf-life of dried persimmons was lengthened in $SO_2$ generating pads (especially in $SO_2$ 2 g/kg) for inhibiting of browning and decaying.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.12
• /
• pp.1273-1280
• /
• 2008

This study sought to establish the optimum operating condition for the recovery of caustic (NaOH) solution from mercerization in textile process. As main factors, the silt density index (SDI) evaluation of ceramic membrane for the application of nanofiltration/reverse osmosis (NF/RO) membrane, the recovery yield measurement of caustic solution for the application of polymeric membrane, the optimum condition of chemical cleaning for the membrane regeneration, the optimum removal condition of total organic carbon (TOC), turbidity, color, and the permeate flux of ceramic membrane/polymeric membrane combined process were investigated. As results, ceramic ultrafiltration (UF) in the first step and nanofiltration (NF) in the second step were found to be suitable for the removal of total suspended solid (TSS), residual organics, turbidity including color, and the recovery of caustic solution from caustic wastewater stream in mercerization process. When only the ceramic UF membrane was used, the rejection efficiency of both of TSS and turbidity was more than 99.0%, and the color and TOC were rejected about 74.7% and 49.2%, respectively. Meanwhile, the combined membrane precess of UF and NF membranes showed even more efficient removal abilities and thus more than 99.9% of TSS and turbidity, 87.7% of color, and 78.2% of TOC were removed. In particular, 91.3% of NaOH was successfully recovered with 83.7% of total volume in the combined membrane process. With this regard, a clean caustic solution was obtained in a high purity, which can be reused for mercerization process, expecting to offer economical benefits.

• Radiation Oncology Journal
• /
• v.11 no.1
• /
• pp.59-67
• /
• 1993

Between December 1979 and September 1989, 23 patients with craniopharyngioma who underwent surgery and postoperative radiation therapy were retrospectively evaluated to assess the efficacy of this management at the Department of Therapeutic Radiology, Seoul National University Hospital. Total removal of tumor was attempted in all patients. Of these, surgeons tried total removal in eight patients, but revealed residual mass by postoperative CT, and partial removal was done in 15 patients. The morphology of tumor on the operative finding was grouped into three types: cystic 13 ($57{\%}$), solid 4 ($17{\%}$), and mixed 6 ($26{\%}$). Cystic type was predominant in$\leq$20 years old group. Actuarial overall survival rates at 5 and 10 years were $95{\%}$ and $81{\%}$ respectively and actuarial tumor control rates were $74{\%}$ and $50{\%}$. Surgical extent was not related to the survival rates (p=0.41). Pediatric and adolescent patients (age of$\leq$20 years) had a trend of better survival than that of adult patients (p=0.10). The results indicated that limited surgical excision followed by radiation therapy is recommended when total excision is not possible.

• Economic and Environmental Geology
• /
• v.53 no.4
• /
• pp.337-346
• /
• 2020

This study was carried out to evaluate the applicability of the soil washing process to remediation mercury-contaminated mine tailing or solid material (soil and sediments etc.) around abandoned mines. First, the physicochemical characteristics of mine tailing were analyzed through particle size analysis and sequential extraction. Secondly, laboratory scale washing experiments were performed using hydrochloric acid, nitric acid, potassium iodide and sodium thiosulfate. As a results of particle size analysis, mine tailing particle were concentrated below 40 mesh and the particle size below 200 mesh was the most analyzed. As a result of sequential extraction, elemental mercury fraction was analyzed as the highest with 69.12%, with strongly bound fraction 15.25% and residual and HgS fractions 11.97%, respectively. Laboratory scale washing experiments showed low applicability for nitric acid and sodium thiosulfate solutions. In case of hydrochloric acid solution, it was analyzed that mercury removal was possible at particle size of 200 mesh or more. Therefore, it is considered to be performed together with the physical sorting process. Potassium iodide solution was analyzed to have high washing efficiency at all concentrations and particle sizes. In particular, the mercury removal efficiency is high in the micro particles, and thus the applicability of the washing technology is the highest.