• 제목/요약/키워드: Residual scaling

검색결과 35건 처리시간 0.031초

CARDB를 이용한 반복적인 업-다운 샘플링 네트워크 기반의 단일 영상 초해상도 복원 (Single Image Super-Resolution Using CARDB Based on Iterative Up-Down Sampling Architecture)

  • 김인구;유송현;정제창
    • 방송공학회논문지
    • /
    • 제25권2호
    • /
    • pp.242-251
    • /
    • 2020
  • 최근 단일 영상 초해상도에 깊은 합성 곱 신경망을 적용한 알고리듬이 많이 연구되었다. 현존하는 딥러닝 기반 초해상도 기법들은 네트워크의 후반부에 해상도를 업샘플링 하는 구조를 가진다. 이러한 구조는 저해상도에서 고해상도로 한 번에 매핑을 하기에 많은 정보를 예측하는 높은 확대율에서 비효율적인 구조를 가진다. 본 논문에서는 반복적인 업-다운 샘플링 구조를 기반으로 하여 채널 집중 잔여 밀집 블록을 이용한 단일 영상 초해상도 기법을 제안한다. 제안한 알고리듬은 저해상도와 고해상도의 매핑 관계를 효율적으로 예측하여 높은 확대율에서 기존의 알고리듬에 비해 최대 0.14dB 성능 향상과 개선된 주관적 화질을 보여준다.

Experimental analysis of rocking shallow foundation on cohesive sand

  • Moosavian, S.M. Hadi;Ghalandarzadeh, Abbas;Hosseini, Abdollah
    • Earthquakes and Structures
    • /
    • 제22권6호
    • /
    • pp.597-608
    • /
    • 2022
  • One of the most important parameters affecting nonlinearsoil-structure interaction, especially rocking foundation, is the vertical factor of safety (F.Sv). In this research, the effect of F.Sv on the behavior of rocking foundations was experimentally investigated. A set of slow, cyclic, horizontal loading tests was conducted on elastic SDOF structures with different shallow foundations. Vertical bearing capacity tests also were conducted to determine the F.Sv more precisely. Furthermore, 10% silt was mixed with the dry sand at a 5% moisture content to reach the minimum apparent cohesion. The results of the vertical bearing capacity tests showed that the bearing capacity coefficients (Nc and Nγ) were influenced by the scaling effect. The results of horizontal cyclic loading tests showed that the trend of increase in capacity was substantially related to the source of nonlinearity and it varied by changing F.Sv. Stiffness degradation was found to occur in the final cycles of loading. The results indicated that the moment capacity and damping ratio of the system in models with lower F.Sv values depended on soil specifications such cohesiveness or non-cohesiveness and were not just a function of F.Sv.

Fourier 변환 변이계수를 이용한 미디언 필터링 영상의 포렌식 판정 (Forensic Decision of Median Filtering Image Using a Coefficient of Variation of Fourier Transform)

  • 이강현
    • 전자공학회논문지
    • /
    • 제52권8호
    • /
    • pp.67-73
    • /
    • 2015
  • 디지털 영상의 배포에서, 위 변조자에 의해 영상이 변조되는 심각한 문제가 있다. 이러한 문제를 해결하기 위하여, 본 논문에서는 영상의 Fourier 변환 변이계수를 이용한 미디언 필터링 (Median Filtering: MF) 영상의 포렌식 판정 알고리즘을 제안한다. 제안된 알고리즘에서, 영상의 각 수평, 수직라인의 Fourier 변환 (Fourier Transform: FT)을 하고, 이웃 라인과의 변이계수를 기반으로 하여 MF 검출 (Median Filtering Detection: MFD)을 위한 10 Dim. 특징벡터를 정의한다. 이는 MF 검출기의 SVM (Support Vector Machine) 학습에 사용된다. 제안된 미디언 필터링 검출 스킴은 동일 10 Dim. 특징벡터의 MFR (Median Filter Residual)과 Rhee의 MF 검출 스킴과 비교하여 원영상, JPEG (QF=90), Down 스케일링 (0.9) 그리고 Up 스케일링 (1.1) 영상에서는 성능이 우수하며, Gaussian 필터링($3{\times}3$) 영상에서는 성능이 일부 높았다. 제안된 알고리즘은 성능평가 전체항목에서 민감도 (Sensitivity; TP: True Positive rate)와 1-특이도 (1-Specificity; FP: False Positive rate)에 의한 AUC (Area Under ROC (Receiver Operating Characteristic) Curve)가 모두 1에 수렴하여 'Excellent (A)' 등급임을 확인하였다.

α-특징 지도 스케일링을 이용한 원시파형 화자 인증 (α-feature map scaling for raw waveform speaker verification)

  • 정지원;심혜진;김주호;유하진
    • 한국음향학회지
    • /
    • 제39권5호
    • /
    • pp.441-446
    • /
    • 2020
  • 본 논문은 심층 신경망을 이용한 화자 인증(Speaker Verification, SV) 시스템에서, 심층 신경망 내부에 존재하는 각 특징 지도(Feature Map)들의 분별력을 강화하기 위해 기존 특징 지도 스케일링(Feature Map Scaling, FMS) 기법을 확장한 α-FMS 기법을 제안한다. 기존의 FMS 기법은 특징 지도로부터 스케일 벡터를 구한 뒤, 이를 특징 지도에 더하거나 곱하거나 혹은 두 방식을 차례로 적용한다. 하지만 FMS 기법은 동일한 스케일 벡터를 덧셈과 곱셈 연산에 중복으로 사용할 뿐만 아니라, 스케일 벡터 자체도 sigmoid 비선형 활성 함수를 이용하여 계산되기 때문에 덧셈을 수행할 경우 그 값의 범위가 제한된다는 한계가 존재한다. 본 연구에서는 이러한 한계점을 극복하기 위해 별도의 α라는 학습 파라미터를 특징 지도에 원소 단위로 더한 뒤, 스케일 벡터를 곱하는 방식으로 α-FMS 기법을 설계하였다. 이 때, 제안한 α-FMS 기법은 스칼라 α를 학습하여 특징 지도의 모든 필터에 동일 값을 적용하는 방식과 벡터 α를 학습하여 특징 지도의 각 필터에 서로 다른 값을 적용하는 방식을 각각 적용 후 그 성능을 비교하였다. 두 방식의 α-FMS 모두 심층 심경망 내부의 잔차 연결이 적용된 각 블록 뒤에 적용하였다. 제안한 기법들의 유효성을 검증하기 위해 RawNet2 학습세트를 이용하여 학습시킨 뒤, VoxCeleb1 평가세트를 이용하여 성능을 평가한 결과, 각각 동일 오류율 2.47 %, 2.31 %를 확인하였다.

시간 종속 구조응력해석을 위한 전문가 유한요소 모델링 (An Expert Finite Element Discretization for Time-Dependent Structural Problems)

  • 주관정
    • 전산구조공학
    • /
    • 제3권3호
    • /
    • pp.125-131
    • /
    • 1990
  • 본 논문에서는 시간 종속 하중을 받는 대형 전산구조응력 해석 문제를 위한 유한요소 모델링 기법이 소개된다. 유한요소모델링의 분할기준은 문제에 대한 해석 결과에 대한 오차선정에 근거를 둔다. 이 오차산정은 해석결과치에 의한 잔유 에너지의 크기를 유한요소별로 산정한다. 이의 시간존장 구조물에 대한 응용은, 구조연속체의 Ritz 고유진동 모드를 계산하고 이들 진동 모드 중에서 저주파에 상응하는 진동모드에 대해 잔유 에너지의 크기가 구조체 전체영역에서 평형을 유지하도록 유한요소 모델링을 수행한다. 마지막으로, 여기서 제안된 알고리즘이 몇 예제들을 통해서 검증된다.

  • PDF

MHD Turbulence in Expanding and Contracting Media

  • Park, Junseong;Ryu, Dongsu;Cho, Jungyeon
    • 천문학회보
    • /
    • 제40권1호
    • /
    • pp.58.2-58.2
    • /
    • 2015
  • We investigate the decaying incompressible MHD turbulence by including the effect of the expansion and contraction of background medium. In such an environment, incompressible MHD turbulence has two kinds of time scale. One is the eddy turn-over time (teddy), the other is the expansion/contraction time (texp-cntr). The turbulence is expected to behave differently according to the relationship between the two time scales. For instance, for teddy < texp-cntr, the turbulence would be decay more or less as in a static medium. On the other hand, for teddy > texp-cntr, the effects of expansion and contraction would be dominant. We examine the properties of turbulence in these two regime cases. Based on it, we derive a scaling for the time evolution of flow velocity and magnetic field. (i) In the decay effect dominant case, the velocity and magnetic field scale as $\sqrt{{\rho}v}{\sim}a^{-3}$, $b{\sim}a^{-2.5}$(expanding media) and $\sqrt{{\rho}v}{\sim}a^{-2}$, $b{\sim}a^{-1.5}$(contracting media). The total energy and residual spectra follow the $E^T_k{\sim}k^{-5/3}$, $E^R_k{\sim}k^{-7.3}$ in the inertial range. (ii) In the expanding and contracting dominant case, the velocity and magnetic field scale as $\sqrt{{\rho}v}{\sim}a^{-2.5}$, $b{\sim}a^{-2}$ (expanding/contracting media). The Kinetic and magnetic energy spectra follow the $E^K_k{\sim}a^{-5}$, $E^M_k{\sim}a^{-4}$. We have confirmed that scaling of velocity and magnetic filed is almost the same from the analytic estimates and computational models

  • PDF

렌즈모듈을 이용한 광학계 설계 I: 줌렌즈의 First Order 최적설계 (Optical system design using lens modules I:optimum first order design in zoom lens)

  • 박성찬;김영식
    • 한국광학회지
    • /
    • 제8권2호
    • /
    • pp.81-87
    • /
    • 1997
  • 본 논문은 4군구성의 비디오 카메라용 줌광학계에 대해 렌즈모듈의 개념을 이용하여 1차량 및 3차 수차를 고려한 최적의 초기설계와 이로부터 설계 줌광학계를 설계하는 방법을 제안하였다. 최적화 과정을 통해 각각의 렌즈모듈에 적절히 1차량과 3차 수차량을 설정함으로써 줌비 10배(f'=6.1693~58.4065)를 갖고, 최적설계에 필요한 구속조건을 만족시키는 초기설계 줌광학계를 얻었다. 적절히 선정된 각각의 렌즈군의 촛점거리가 렌즈모듈의 촛점거리와 같도록 scaling 한 후, 군사이의 공기간격을 조정하므로써 줌궤적을 일치시켰다. 이러한 과정을 통해 독립적으로 설계된 군들을 결합시켜 얻은 줌광학계는 렌즈모듈로 구성된 원래의 초기설계된 줌광학계와 동일한 1차특성을 갖는다. 결과적으로 잔여수차 보정을 통해 후군촛점조절방식을 이용하는 비디오 카메라 줌렌즈로서 유용한 줌광학계를 얻을 수 있었다.

  • PDF

Curet과 Ultrasonic Scaler를 이용한 치주치료후 SEM과 EPMA를 이용한 잔존치근면에 대한 연구 (The Study on the Root Surfaces with SEM and EPMA Following Periodontal Treatment with Curet and Ultrasonic Scaler)

  • 김재혁;김종여;임성빈;정진형
    • Journal of Periodontal and Implant Science
    • /
    • 제29권2호
    • /
    • pp.387-400
    • /
    • 1999
  • One of the fundamental causes of periodontal disease is accumulation of bacterial plaque and calculus and most effective method of removing these plaque and calculus are scaling and root planning using hand curet and ultrasonic scaler. Many studies concerning residual degenerated mineral content after periodontal therapies have been carried out, but some problems about these studies were also known. This research studies mineral concents and distribution of residual root surfaces after perfoming hand curet and ultrasonic scaler on root surfaces of single rooted teeth which were extracted for periodontal reasons. EPMA were used to avoid errors from chemical quantative analysis and in addition SEM observation was also performed. The results were as follows. 1. No differences were found between curet group andultrasonic scaler group in Ca, P, Mg and Na level. 2. Concentration level was decreased in the sequence of Ca, P, Mg and Na. 3. Ca and P level were decreased as going to apical portion at curet group and ultrasonic scaler group. 4. More cementum was removed at cervical portion compared to other portion at curet group and ultrasonic scaler group. 5. Ca, P, Mg level was higher in dentin compared to cememtum. There was no difference in mineral level for Ca, P, Mg and Na between root surfaces treated with hand curet and ultrasonic scaler.

  • PDF

Chemical cleansing as an adjunct to subgingival instrumentation with ultrasonic and hand devices in deep periodontal pockets: a randomized controlled study

  • Zafar, Fahad;Romano, Federica;Citterio, Filippo;Ferrarotti, Francesco;Dellavia, Claudia;Chang, Moontaek;Aimetti, Mario
    • Journal of Periodontal and Implant Science
    • /
    • 제51권4호
    • /
    • pp.276-284
    • /
    • 2021
  • Purpose: The aim of this randomized clinical trial was to assess whether chemical cleansing using a sulfonic/sulfuric acid gel solution (HBX) as an adjunct to scaling and root planing (SRP) resulted in a decrease in residual plaque and calculus in deep periodontal pockets compared to SRP alone. Methods: Fifty-six patients with 56 hopeless posterior teeth, scheduled for extraction due to severe periodontitis, were enrolled in this study. Each tooth was randomly assigned to 1 of the 2 experimental procedures. The test teeth were subjected to the irrigation of the subgingival area with HBX for 2 minutes, followed by SRP with hand and ultrasonic instruments for 14 minutes, and then extracted. The control teeth received only mechanical instrumentation before extraction. Residual biofilm was evaluated on photographs and measured as total area and percentage of root surface covered by remaining plaque (RP) or calculus (RC) after treatment. Results: The initial pocket depth (PD) and total subgingival root surface area were similar between the 2 treatment groups. After treatment, the total subgingival root area covered by RP and RC was statistically significantly larger (P<0.001) in the control group than in the test group. The test teeth showed a lower percentage of RP, but a higher percentage of RC than the control teeth (both P<0.001). Complete calculus removal was achieved in 42% of the control teeth surfaces and in 25% of the test teeth surfaces for a PD of 4 mm. Conclusions: The additional chemical cleansing with HBX resulted in a statistically significant improvement in bacterial plaque removal during SRP of deep pockets, but it was not effective in reducing calculus deposits.

Multiresolution Wavelet-Based Disparity Estimation for Stereo Image Compression

  • Tengcharoen, Chompoonuch;Varakulsiripunth, Ruttikorn
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.1098-1101
    • /
    • 2004
  • The ordinary stereo image of an object consists of data of left and right views. Therefore, the left and right image pairs have to be transmitted simultaneously in order to display 3-dimentional video at the remote site. However, due to the twice data in comparing with a monoscopic image of the same object, it needs to be compressed for fast transmission and resource saving. Hence, it needs an effective coding algorithm for compressing stereo image. It was found previously that compressing left and right frames independently will achieve the compression ratio lower than compressing by utilizing the spatial redundancy between both frames. Therefore, in this paper, we study the stereo image compression technique based on the multiresolution wavelet transform using varied disparity-block size for estimation and compensation. The size of disparity-block in the stereo pair subbands are scaling on a coarse-to-fine wavelet coefficients strategy. Finally, the reference left image and residual right image after disparity estimation and compensation are coded by using SPIHT coding. The considered method demonstrates good performance in both PSNR measures and visual quality for stereo image.

  • PDF