• 제목/요약/키워드: Residual ridge

검색결과 113건 처리시간 0.024초

고해상 탄성파 자료를 이용한 황해 중부 해역에서의 제4기 퇴적환경 (Quaternary Depositional Environments in the Central Yellow Sea Interpreted from Chirp Seismic Data)

  • 허식;천종화;한상준;신동혁;이희일;김성렬;최동림;이용국;정백훈;석봉출
    • 지구물리
    • /
    • 제2권3호
    • /
    • pp.191-200
    • /
    • 1999
  • 정밀 탄성파 탐사자료의 분석에 의하면 황해 중부의 퇴적환경은 크게 중국쪽 황하의 삼각주(delta) 환경, 황해 중심부의 침식대(erosional zone), 그리고 한국쪽의 모래퇴(sand ridge) 및 모래파(sand wave) 환경으로 뚜렷하게 구분된다. 중국 황하 말단부에서는 전진퇴적 양상의 삼각주 전면(delta front)에서 점진적으로 전위삼각주(prodelta)로 변한다. 삼각주 퇴적물들은 황해 중심부로 이동하지 못하고, 대부분이 산동반도를 돌아서 남하한다. 황해 중심부에 발달한 침식대에서는 북서-남동 방향으로 발달한 다수의 해저수로들과 불규칙한 형태의 침식면이 관찰된다. 이 해역의 일부에서는 선현세 산화대층이 해저면에 노출되어 있는데, 홀로세 동안에 퇴적물의 집적보다는 무퇴적 또는 침식작용이 우세하였음을 지시한다. 한국측 주변 해역에서는 규칙적인 배열 및 형태를 갖는 모래퇴 또는 모래파들이 발달되어 있다. 이 모래질 퇴적물들은 대부분이 저해수면 시기에 하천으로부터 공급된 퇴적물로서 해수면이 다시 상승할 때 재동·잔류된 것으로 해석된다. 현생 모래퇴들은 북동-남서 방향으로 배열되어 있는데, 이것은 조류의 영향에 의한 것으로 해석된다.

  • PDF

천공형 티타늄 막의 조기 노출이 수직 골 형성에 미치는 영향 (The effect of early membrane exposure on exophytic bone formation using perforated titanium membrane)

  • 김은정;허익;권영혁;박준봉;정종혁
    • Journal of Periodontal and Implant Science
    • /
    • 제37권2호
    • /
    • pp.237-249
    • /
    • 2007
  • This study was performed to evaluate the effect of membrane exposure on new bone formation when guided bone regeneration with perforated titanium membrane on atrophic alveolar ridge. The present study attempted to establish a GBR model for four adult beagle dog premolar. Intra-marrow penetration defects were created on the alveolar ridge(twelve weeks after extraction) on the mandibular premolar teeth in the beagle dogs. Space providing perforated titanium membrane with various graft material were implanted to provide for GBR. The graft material were demineralized bovine bone(DBB), Irradiated cancellous bone(ICB) and demineralized human bone powder(DFDB). The gingival flap were advanced to cover the membranes and sutured. Seven sites experienced wound failure within 2-3weeks postsurgery resulting in membrane exposure. The animals were euthanized at 4 weeks postsurgery for histologic and histometric analysis. The results of this study were as follows: 1. There was little new bone formation at 4 weeks postsurgery. irrespectively of membrane exposure. 2. There was significant relationship between membrane exposure and bone graft resorption(P<0.05), but no relation between membrane exposure and infiltrated connective tissue. 3. There was much bone graft resorption on DFDB than ICB and DBB. 4. The less exposure was on the perforated titanium membrane, the more dense infiltrated connective tissue was filled under the membrane when grafted with ICB and DBB. but there was no relationship between the rate of membrane exposure and the percentage of infiltrated connective tissue area and no relationship between the percentage of the area in the infiltrated connective tissue and in the residual bone graft. Within the above results, bone formation may be inhibited when membrane was exposed and ICB and DBB were more effective than DFDB as a bone graft material when guided bone regeneration.

부분 설절제술을 받은 환자에서의 연마면 인상 및 Direct Metal Laser Sintering 을 이용한 총의치 제작 증례 (Complete denture making in a patient of partial glossectomy using polished surface impression taking and direct metal laser sintering method: A case report)

  • 정연욱;이경제;김희중
    • 대한치과보철학회지
    • /
    • 제57권4호
    • /
    • pp.350-355
    • /
    • 2019
  • 성공적인 총의치를 위해서는 유지, 안정, 지지 세가지 요소가 필수적으로 요구된다. 또한 심한 치조제의 흡수나 수술에 의한 반흔으로 인해 하악 설측변연 형성이 어려운 총의치 제작시에는 무교두 치아배열, 연마면 인상, 무게 보강 내부금속 삽입, 의치 접착 크림의 사용 등의 다양한 고려사항이 필요하다. 본 환자의 경우 심한 치주염으로 심하게 골흡수가 된 무치악 치조제를 가졌고, 또한 설암으로 인한 설절제술로 인해 연조직의 문제를 가진 환자이다. 부가적인 유지와 안정을 얻기 위해 연마면 인상과 내부 보강 금속구조물의 삽입 그리고 최소 가압 인상 등의 방법을 적용하여 보다 나은 임상적 결과를 나타내었다. 또한 원하는 3차원적 형태를 정확하게 부여하고 제작시 복잡한 기공과정을 줄인 금속 구조물을 제작하기 위해 최소 가압 인상 채득과 Direct metal laser sintering이 사용되었다.

부가적인 유지구조를 가진 미니 임플란트의 디지털 수복 증례 (Mini-implant with additional retentive structure by using digital method)

  • 황수현;배은빈;조원탁;허중보
    • 대한치과보철학회지
    • /
    • 제60권1호
    • /
    • pp.119-126
    • /
    • 2022
  • 하악 전치부와 같이 골 폭이 좁은 환자에서 미니 임플란트 사용은 기존의 직경 임플란트의 대안으로 보고된다. 그러나, 기존 일체형 미니 임플란트의 사용시 보철물 탈락과 시멘트 사용으로 인한 임플란트 주위염과 같은 합병증의 발생이 보고되고 있다. 최근 미니 임플란트의 유지력 및 안정성을 높이기 위해 상부에 부가적인 유지구조를 가진 일체형 미니 임플란트가 소개되었다. 상부 탄성부를 스프레더로 벌려 줌으로써 지르코니아 보철물 내면의 결합구조와 결합하는 방식을 기반으로 한다. 이에 본 증례는 좁은 폭경의 하악 전치부에서 상부에 결합구조를 가진 일체형 미니 임플란트를 통하여 이러한 합병증을 줄이고자 하였으며 디지털 시스템을 이용하여 전반적인 치료기간을 단축하였다. 두명의 환자에서 유지기능과 심미적인 면에서 만족스러운 임상결과를 얻었기에 본 증례를 보고하고자 한다.

Short-term, Multi-center Prospective Clinical Study of Short Implants Measuring Less Than 7mm

  • Kim, Young-Kyun;Yi, Yang-Jin;Kim, Su-Gwan;Cho, Yong-Seok;Yang, Choon-Mo;Liang, Po-Chin;Chen, Yu-Yal;I, Lee-Long;Sim, Christopher;Tan, Winston;Ser, Go Wee;Yue, Deng;Yi, Man;Ping, Gong
    • Journal of Korean Dental Science
    • /
    • 제3권1호
    • /
    • pp.11-16
    • /
    • 2010
  • Objective : This prospective study sought to verify the stability of three types of short implants measuring 7mm or less. Materials and methods : Implants measuring 7mm or less were placed in patients at multicenter dental clinics in Korea, China, Taiwan, and Singapore. Initial stability, intraoperative and postoperative complications, crestal bone loss, and survival rate of the implant were prospectively evaluated. Results : The primary stability of a 6-mm implant was lower than that of a 7-mm implant. The marginal bone loss of short implants measuring less than 7mm was minimal. Complications such as wound dehiscence, implant mobility, and peri-implant mucositis developed, and these were associated with initial implant failure. The short-term survival rate of 6-mm implant was 93.7%, and that of 7-mm implant, 96.6%. Conclusion : Short implant for the mandible with insufficient height for the residual ridge can be selectively used. Poor primary stability and wound dehiscence can cause osseointegration failure and alveolar bone loss.

  • PDF

심미적 부위에서 가공치 하방 잔존치조제의 형성 및 연조직 복제 모형을 이용한 고정성 보철물 수복증례 (Pontic site development and soft tissue transfer of the esthetic area: a case report)

  • 김학천;노관태;권긍록;김형섭
    • 대한치과보철학회지
    • /
    • 제51권4호
    • /
    • pp.323-331
    • /
    • 2013
  • 고정성 국소의치를 이용한 수복 시 보철물 자체의 심미성뿐 아니라 보철물과 조화로운 주변 연조직의 형성 또한 중요한 요소이며, 임시보철물을 이용하여 조화로운 연조직의 형태를 형성할 수 있다. 임시보철물을 통해 형성한 연조직의 형태는 적절한 형태를 갖는 최종 수복물을 제작하는데 필요한 정보를 제공할 수 있도록 최종모형으로 정확하게 복제되어야 한다. 그러나, 임시보철물 주위 연조직의 형태는 인상과정 또는 인상재의 압력 등으로 최종 모형으로의 복제가 어렵다. 따라서, 임시보철물을 이용하여 형성한 구강내의 연조직 형태를 모형으로 복제하여 연조직과 조화로운 최종 수복물을 제작하는 서로 다른 2가지 방법을 본 증례보고에서 소개한다.

상악 단일 치아 임프란트의 후향적 연구 (A Retrospective study on upper single tooth implants)

  • 조수진;이근우;조규성;문익상
    • Journal of Periodontal and Implant Science
    • /
    • 제33권3호
    • /
    • pp.383-393
    • /
    • 2003
  • The aim of this retrospective study was to compare the amount of marginal bone loss between upper anterior area and upper posterior area with 71 upper single-tooth restorations on 2 stage machined $Br{{\aa}}nemark$ implants since Jan 1995. The second aim was to compare the bone defect group which had dehiscence and fenetration and the others in the upper anterior region. The results were as follows. 1. The most frequent reason of missing tooth in the upper anterior region was trauma by 61%. While upper posterior region showed various reasons such as congenital missing, advanced periodontitis, trauma. 2. Peri-implantitis with fistula occurred 1 of 41 implants in the upper anterior group in 1 year after loading and 2 of 32 implants in the upper posterior group failed before loading. The 1 year success rate of upper anterior group was 97.56 %, and 93.75 % for upper posterior group. 3. The mean marginal bone loss in the upper anterior group was 0.44${\pm}$0.25 mm, while 0.57${\pm}$0.32 mm in the upper posterior group. There was statistically significant difference in the amount of mean marginal bone loss (P${\pm}$0.10 mm at one year, and 0.48${\pm}$0.26 mm for the control group. No statistically significant difference of mean marginal bone loss was showen between bone defect group and the others at implantation. According to the results, the upper anterior region showed less marginal bone loss than the upper posterior region. In case of missing single upper tooth, careful consideration on recipient residual ridge to determine proper implant diameter and length, sufficient healing time, proper loading would lead to implant success. Single tooth implants in the maxilla seemed to be an alternative to fixed partial dentures without damage to adjacent teeth.

Prevalence and location of the posterior superior alveolar artery using cone-beam computed tomography

  • Tehranchi, Maryam;Taleghani, Ferial;Shahab, Shahriar;Nouri, Arash
    • Imaging Science in Dentistry
    • /
    • 제47권1호
    • /
    • pp.39-44
    • /
    • 2017
  • Purpose: Insufficient knowledge of the anatomy of the maxillary sinuses prior to sinus graft surgery may lead to perioperative or postoperative complications. This study sought to characterize the position of the posterior superior alveolar artery (PSAA) within the maxillary sinuses using cone-beam computed tomography (CBCT). Materials and Methods: A total of 300 patients with edentulous posterior maxillae, including 138 females and 162 males with an age range of 33-86 years, who presented to a radiology clinic between 2013 and 2015 were enrolled in this retrospective cross-sectional study. The distance from the inferior border of the PSAA to the alveolar crest according to the residual ridge classification by Lekholm and Zarb, the distance from the PSAA to the nasal septum and zygomatic arch, and the diameter and position of the PSAA were all assessed on patients' CBCT scans. The data were analyzed using the Mann-Whitney test and the t-test. Results: The PSAA was detected on the CBCT scans of 87% of the patients; it was located beneath the sinus membrane in 47% of cases and was intraosseous in 47% of cases. The diameter of the artery was between 1 and 2 mm in most patients (72%). The mean diameter of the artery was $1.29{\pm}0.39mm$, and the mean distances from the PSAA to the zygomatic arch, nasal septum, and alveolar crest were $22.59{\pm}4.89mm$, $26.51{\pm}3.52mm$, and $16.7{\pm}3.96mm$, respectively. Conclusion: The likelihood of detecting the PSAA on CBCT scans is high; its location is intraosseous or beneath the sinus membrane in most patients. Determining the exact location of the PSAA on CBCT scans preoperatively can help prevent it from being damaged during surgery.

후방연장 국소의치에서 지대치의 splinting에 따른 치주조직의 응력 변화에 관한 유한요소법적 연구 (FINITE ELEMENT ANALYSIS OF STRESS PATTERNS ON PERIODONTIUM OF SPLINTED ABUTMENTSFOR DISTAL EXTENSION REMOVABLE PARTIAL DENTURE)

  • 황재웅;장익태;김광남
    • 대한치과보철학회지
    • /
    • 제33권2호
    • /
    • pp.241-268
    • /
    • 1995
  • Splint therapy, the immobilization of teeth, has been done for patient's masticatory comforts and an adjunctive aid in periodontal therapy. Mandibular premolars are frequently splinted in many distal extension removable partial denture cases. But splinting is an extensive restoration that may not be conservative of tooth structure and may prove to be quite costly to the patient. The two dimensional finite element analysis method was used to determine the magnitude and mode of distribution of the stresses of the periodontal ligament and supporting alveolar bone when abutments with different periodontal supports were splinted and distal-extension removable partial denture was subjected to different loading schemes. The results were as follows : 1. When abutments were splinted, stresses moved from apico-distal to apico-mesial of terminal abutment on a vertical force and from disto-alveolar crest to apex on a distally directed force. But stresses were generally diminished on a mesially directed force. 2. As vertical bone loss was proceeding, most of stresses were transmitted to residual ridge and the rest of stresses were concentrated on apex of distal abutment. But these apical stresses were minimized when abutments were splinted. 3. As mesially inclined bone loss was proceeding, it seemed to be dangerous that many stresses were concentrated on the distal alveolar crest, especially in the distally directed load case. Abutments splinting decreased the alveolar crestal stresses but not enough. 4. For all vertical stresses were effectively decreased on splinting, stresses were concentrated as highly on apico-mesial area of distal abutment in distally directed load cases as the distal inclination of bone level was severe. 5. The directions and magnitudes of abutment movements were decreased with teeth splinting.

  • PDF

폐경후 골다공증 여성환자에 있어서 파노라마상 하악골 지표에 관한 비교연구 (COMPARATIVE STUDY OF PANORAMIC MANDIBULAR PARAMETERS IN POSTMENOPAUSAL OSTEOPOROTIC WOMEN)

  • 김철훈;신상훈;양동규
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제26권5호
    • /
    • pp.519-526
    • /
    • 2000
  • Osteoporosis has recently been recognized as a major health problem in the elderly population. The disorder is manifested as a loss of bone mass accompanied by structural alteration of bone and increased incidence of fracture. Mandible also may be affected. So, I evaluated panoramic views of 66 postmenopausal women for finding the possibility of useful diagnostic mandibular parmeters of osteoporosis. To know the correlationship between skeleton and mandible, the average of the bone mineral density of lumbar from 2nd to 4th by the dual energy X-ray absorptiometry(DEXA, LUNAR DPZ. USA), and age and mandibular parameters, that is, the number of residual teeth, alveolar ridge resorption ratio, panoramic mandibular index (PMI), mandibular cortical width (MCW), angular cortical thickness (ACT), ramus cortical thickness (RCT), morphology of mandibular inferior cortical (MIC) were compared. And I divided the all tested women to the osteoporotic group and non-osteoporotic group by the use of T-score -2.0, which was derived from skeletal bone mineral density (BMD). To find the correlationship of the each group with mandibular parameters, t-test and discriminant analysis were done. The results of the t-test were that all parameters were highly related with 2 groups (p<0.05). Especially ACT, MIC, age have had even higher correlationship than others (p<0.001). The results of the discriminant analysis by the use of these ACT, MIC and age were that the discriminant function was Z = -2.973+(-1.447)$\times$(ACT)+1.131$\times$(MIC score)+(0.052)$\times$(age), the cutting score was 0.257 and the classification accuracy was 84.8%. Therefore I suggest that the consideration of the angular cortical thickness (ACT), the age of patient and the morphology of mandibular inferior cortical(MIC) may help find the osteoporosis.

  • PDF