• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.269-269
• /
• 2022

Pre-harvest sprouting (PHS) on rice panicles is getting problematic in recent several years in Korea due to climate changes such as high temperature and more frequent typhoons during harvesting season. PHS negatively affects grain quality severely and also yield. Genetic improvement of Korean varieties (Oryza sativa ssp. japonica) through a marker assisted-backcross breeding (MAB) with the known PHS resistant genes must be one of ideal solutions. However, the final breeding products of MAB occasionally exhibit unwanted traits, especially the cross between genetically distant parents. This might be caused by linkage drag and/or presence of the gene-unlinked donor introgressions, resulting that the final products could not be released to the farmers. The major PHS resistance gene, Sdr4 (Seed dormancy 4) originated from an indica cultivar, Kasalath was selected as a donor gene. In order to avoid unexpected phenotypes in the breeding products, we performed a precision marker-based breeding (PMBB) consisting of foreground, recombinant, and background selections (FS, RS, and BS) which aim to develop 'single small introgression lines' (~100 kb introgression). Korean varieties (Ilpum and Gopum) were crossed with Kasalath. We developed Sdr4-allele specific markers for FS and a set of polymorphic flanking markers near the Sdr4 (-350kb and +420kb) for RS. To minimize linkage drag, the small introgression (< 125kb) containing Sdr4 was selected in Ilpum background (BC₂F₄) through 1^st RS with ~1,200 F₂ or BC₁F₂ plants (one side trimmed) and then 2^nd RS with ~1,000 progenies from the 1^st RS selected plants (another side trimmed). After RS, the selected lines were genotyped by using Infinium 7K SNP chip to detect other donor introgressions and the lines were backcrossed. Currently BS is on-going from the backcross-derived progenies with BS markers to remove residual introgressions. During the PMBB process, genetic effect of Sdr-4-Kasalath allele was confirmed in Ilpum and Gopum backgrounds by PHS phenotyping using the segregating BC₂F₃ or BC₁F₄ materials. The Sdr4 PMBB lines in Ilpum background (< 125kb introgression) will be valuable genetic resources to improve PHS resistance in modem popular temperate japonica varieties.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.4
• /
• pp.17-26
• /
• 2023

To consider the risk of damage and fracture of P.C strands, the existing post-maintenance system alone has the limitations, hence it is necessary to quantitatively evaluate and predict the deterioration, durability and safety of facilities and establish a reasonable maintenance system considering the asset value of facilities. Therefore, it is worth considering a preventive maintenance plan that allows proactive measures to be taken before a major defect occurs in the temporary anchor. This study devised a preventive over tension method, reviewed its effectiveness through design and field tests, by calculating the resistance factors by performing a reliability-based optimization design. At this time, the over tension anchor method was evaluated using the ratio of the residual tension force after the fracture of P.C strands to the effective tension force before the fracture of P.C strand, followed by the resistance factor calculated by the optimal solution for each random variables using Excel solver and applying it to the limit state equations. As a result of the study, if the over tension ratio is 125% to 130%, the remaining strands showed a high resistance effect even after the fracture of P.C strand. As a result of the optimization design, it was found that it is appropriate to apply the load factor (γ) of 1.25, and the resistance factors of Φ₁, Φ₂, Φ₃ as 0.7, 0.5, 0.6.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.562-575
• /
• 2023

In an effort to improve water quality, the South Korean government has implemented measures to increase seawater circulation in Saemangeum Lake. We analyzed the effect of increasing the frequency of seawater circulation based on salinity levels and bottom water exchange in the lake, using an environmental fluid dynamics code model. When the sluice gate opening and shutting frequency increased from once to twice per day, the internal water level of Saemangeum Lake increased by up to ~0.7 m. The salinity increased by 2.12 psu near the western breakwater and decreased by 1.18 psu near the freshwater inlet. We analyzed the extent of bottom water exchange using a particle tracing method and observed that the residual rate of particles shallower than 5 m in water depth decreased by 2.52% in Case 2 (opening and shutting twice per day) compared to Case 1 (opening and shutting once per day). This indicates that increasing the frequency of sluice gate opening and shutting would promote enhanced bottom water exchange. Consequently, the increased salinity and bottom water exchange associated with increased seawater circulation are expected to improve water quality in Saemangeum Lake.

• Steel and Composite Structures
• /
• v.50 no.3
• /
• pp.281-298
• /
• 2024

Stainless steel bolts (SSB) are increasingly utilized in bolted steel connections due to their good mechanical performance and excellent corrosion resistance. Fire accidents, which commonly occur in engineering scenarios, pose a significant threat to the safety of steel frames. The post-fire behavior of SSB has a significant influence on the structural integrity of steel frames, and neglecting the effect of temperature can lead to serious accidents in engineering. Therefore, it is important to evaluate the performance of SSB at elevated temperatures and their residual strength after a fire incident. To investigate the mechanical behavior of SSB after fire, 114 bolts with grades A4-70 and A4-80, manufactured from 316L austenitic stainless steel, were subjected to elevated temperatures ranging from 20℃ to 1200℃. Two different cooling methods commonly employed in engineering, namely cooling at ambient temperatures (air cooling) and cooling in water (water cooling), were used to cool the bolts. Tensile tests were performed to examine the influence of elevated temperatures and cooling methods on the mechanical behavior of SSB. The results indicate that the temperature does not significantly affect the Young's modulus and the ultimate strength of SSB. Up to 500℃, the yield strength increases with temperature, but this trend reverses when the temperature exceeds 500℃. In contrast, the ultimate strain shows the opposite trend. The strain hardening exponent is not significantly influenced by the temperature until it reaches 500℃. The cooling methods employed have an insignificant impact on the performance of SSB. When compared to high-strength bolts, 316L austenitic SSB demonstrate superior fire resistance. Design models for the post-fire mechanical behavior of 316L austenitic SSB, encompassing parameters such as the elasticity modulus, yield strength, ultimate strength, ultimate strain, and strain hardening exponent, are proposed, and a more precise stress-strain model is recommended to predict the mechanical behavior of 316L austenitic SSB after a fire incident.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.3
• /
• pp.221-233
• /
• 2024

Lignin, a prominent constituent of woody biomass, is abundant in nature, cost-effective, and contains various functional groups, including hydroxyl groups. Owing to these characteristics, they have the potential to replace petroleum-based polyols in the polyurethane industry, offering a solution to environmental problems linked to resource depletion and CO₂ emissions. However, the structural complexity and low reactivity of lignin present challenges for its direct application in polyurethane materials. In this study, Kraft lignin (KL), a representative technical lignin, was fractionated with ethanol, an eco-friendly solvent, and mixed with conventional polyols in varying proportions to produce polyurethane films. The results of ethanol fractionation showed that the polydispersity of ethanol-soluble lignin (ESL) decreased from 3.71 to 2.72 and the hydroxyl content of ESL increased from 4.20 mmol/g to 5.49 mmol/g. Consequently, the polyurethane prepared by adding ESL was superior to the KL-based film, exhibiting improved miscibility with petrochemical-based polyols and reactivity with isocyanate groups. Consequently, the films using ESL as the polyol exhibited reduced shrinkage and a more uniform structure. Optical microscope and scanning electron microscope observations confirmed that lignin aggregation was lower in polyurethane with ESL than in that with KL. When the hydrophobicity of the samples was measured using the water contact angle, the addition of ESL resulted in higher hydrophobicity. In addition, as the amount of ESL added increased, an increase of 7.4% in the residual char was observed, and a 4.04% increase in Tmax the thermal stability of the produced polyurethane was effectively improved.

• The Korean Journal of Pesticide Science
• /
• v.17 no.4
• /
• pp.363-370
• /
• 2013

Susceptibility of each developmental stage of Phthorimaea operculella (Lepidoptera: Gelechiidae) were investigated using 16 insecticides which are available in the market in Korea. For the eggs and pupae, only spinosad showed a 71.1% inhibition rate for egg hatchability and a 66.7% inhibition rate for emergence. For the 3rd instar larvae, the feeding toxicities were over 90% for fenitrothion ($LC_{50}$ 336.6 ppm), esfenvalerate ($LC_{50}$ 8.6 ppm), ethofenprox ($LC_{50}$ 35.7 ppm), and emamectin benzoate ($LC_{50}$ 0.05 ppm). Furthermore, the contact toxicities were over 90% for esfenvalerate ($LC_{50}$ 0.87 ppm), ethofenprox ($LC_{50}$ 16.5 ppm), emamectin benzoate ($LC_{50}$ 0.53 ppm), and spinosad ($LC_{50}$ 2.48 ppm) at the recommended concentrations. Deltamethrin and spinosad yielded 100% mortality for adult P. operculella 48 h after treatment. The adult female fecundity was inhibited by deltamethrin, esfenvalerate, emamectin benzoate, spinosad and dinotefuran, which were significantly different from the control. The adult longevities (7.3-8.3 days) were reduced by approximately 1-2 days compared with the control (9.3 day). The emamectin benzoate maintained 100% insecticidal activity 14 days after treatment and ethofenprox maintained over 90% activity 7 days after treatment.

• The Korean Journal of Pharmacology
• /
• v.31 no.1 s.57
• /
• pp.1-9
• /
• 1995

The slow development of histopathological changes and long period required for stabilization of lesions have suggested that secondary injury processes exacerbate the effect of initial mechanical insult after traumatic spinal cord injury (SCI). The importance of glutamate receptors in the normal functions of spinal cord, in concert with the large body of evidence that points to their involvement in neurotoxicity due to both ischemic and traumatic insults to the CNS, suggested a probable role of glutamate receptors in secondary injury process after traumatic SCI. In order to investigate the involvement of excitatory amino acid in the secondary injury process after SCI, this study examined the effect of dextrorphan, a noncompetitive NMDA receptor antagonist, on the recovery of hindlimb function and the residual tissue at injury site following SCI. Locomotor function was assessed using open field test (21 point scale). At 8 weeks spinal cord tissue was examined using quantitative histopathologic technique. Prior to surgery female Long-Evans rats were adapted to the test environment. Rats received laminectomies (T9/T10), and spinal cord contusions (NYU impactor) were produced by a 10 gm weight dropped 25 mm. DXT (15 or 30 mg/kg, i.p.) or saline was injected 15 min before contusion. Behavioral testing resumed 2 days post-injury and continued twice a week for 8 weeks. No differences between DXT and saline groups were found for hindlimb function and sparing tissue at the lesion site. These results suggest that NMDA receptor might not be involved in secondary injury processes after traumatic SCI.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.2
• /
• pp.148-155
• /
• 1985

This study was conducted to find out the effect of rice straw and wollastonite applied to the paddy soil on the growth and yield of the rice plant. The soil was treated with two level of straw 0 and 88gr per pot, of which respectively combined with 4 levels of wollastonite, 0 (Avail $SiO_2$: 50 ppm), 27 (Avail. $SiO_2$: 150 ppm), 85 (Avail. $SiO_2$: 300 ppm) and 185 (Avail. $SiO_2$: 450 ppm) gr per pot. The results for two years experiment were as follows. 1. Application of rice straw and wollastonite, respectively, suppressed the growth of the plant at early stage. As a consequence the hight and number of tiller of the plant were comparatively smaller, but the combined effect of rice straw and wollastonite treatment on the plant growth appeared after the maximum tillering stage and got a better yield as compared with single treatment of rice straw or wollastonite. 2. At the pot of no rice straw and 27 gr wollastonite treatment, and also pot of rice straw and 85gr (in the year of 1983 experiment) as well as 135gr wollastonite treatment (in the year 1984 experiment), the yield of total dry material and unhulled rice of the plant were respectively higher than other pots in different treatment and the plant height showed similar tentency. Application of rice straw in paddy soil appeared to require more wollastonite for growth of the rice plant as compared with no rice straw application. 3. The highest yield was obtained at the pot with rice straw and 85gr of wollastonite treatment in the year of 1983 experiment, were its yield had 25% increament as compared with the control pot, while being studied for residual effect of rice straw and wollastonite application in the next year, the highest yield was obtained at the pot with rice straw and 135gr wollastonite treatment, where its yield had 30% increament as compared with the control pot.

• Korean Journal of Weed Science
• /
• v.4 no.1
• /
• pp.52-61
• /
• 1984

Pot and laboratory tests were undertaken to investigate the influence of silicate fertilization on butachlor phytotoxicity to rice. Growth of rice seedlings at 150 ppm of $SiO_2$ was stimulated, while adverse effect was observed over 300 ppm of $SiO_2$ and growth reduction was enhanced with combination of butachlor and $SiO_2$ Rice growth in pot trial at 150kg/10a of silicate fertilization was not influenced by recommended amounts of butachlor and nitrofen, however, the growth of Seokwang byeo at 300kg/10a of silicate was markedly retarded by butachlor in the initial stage of growth. Growth reduction of Seokwang byeo caused by combined application of silicate and butachlor was recovered 50 days after herbicide application. Growth reduction from butachlor was not influenced by pH level and also degradation behaviors of butachlor in submerged soil was not altered by silicate fertilization. Adsorbed amount of butachlor on rice root was increased with addition of $SiO_2$ and its amount in Seokwang byeo was higher than that of Jinju byeo. Butachlor absorption by Seokwang byeo was accelerated by 150 ppm of $SiO_2$ applied simultaneously, but those effect was not encountered in Jinju byeo. Butachlor absorption of rice seedlings was also increased by 150 ppm of $K_2O$, while CaO hindered the absorption and $Na_2O$ had no effect on the absorption. Residual level of butachlor in Seokwang byeo treated with combined solution of butachlor and $SiO_2$ was continued higher than that with butachlor alone during 10 days after transplantation to culture solution.

• Journal of Nutrition and Health
• /
• v.42 no.3
• /
• pp.246-255
• /
• 2009

The development of food frequency questionnaire (FFQ) is based on food use and/or dish use. Regardless of potential effect of oils and seasonings on chronic diseases, most of food-based FFQs do not include oils and seasonings in calculation of nutrient intake. This study examined the effect of added (seasoning) oils and seasonings on the distribution of subjects by relative nutrient intake using a dish-based FFQ. The subjects were 1,303 persons (men 478, women 825) aged over 20 years old, who completed FFQ composed of 121 items. Three types of daily nutrient intake were calculated; 1) total nutrient intake with oils and seasonings, 2) nutrient intake without oils, and 3) nutrient intake without oils and seasonings. The correlation and agreement of classification of subjects by relative nutrient intake were examined. All analyses were performed using absolute nutrient intakes and total energy-adjusted nutrient intakes by residual method. Comparing total nutrient intake with the nutrient intake without oils, energy, vegetable fat and vitamin E intake were significantly decreased and kappa values were 0.95 (${\kappa}{\omega}$ = 0.98), 0.64 (${\kappa}{\omega}$ = 0.81), and 0.59 (${\kappa}{\omega}$ = 0.79), respectively. Comparing total nutrient intake with the nutrient intake without oils and seasonings, most of nutrients intake except animal fat, animal protein, retinol and cholesterol were significantly decreased, and kappa values of vegetable fat (${\kappa}$ = 0.64, ${\kappa}{\omega}$ = 0.81), vitamin E (${\kappa}$ = 0.59, ${\kappa}{\omega}$ = 0.79) and sodium (${\kappa}$ = 0.61, ${\kappa}{\omega}$ = 0.80) were under 0.80. After total energy was adjusted, agreement was lower than before total energy adjustment. Excluding oils and seasonings to assess nutrient intake underestimated vegetable fat, vitamin E and sodium intake and affected the distribution of subjects by their relative nutrient intake. Therefore, we suggest that research focused on these nutrients need to be cautious about the interpretation of the results.