• 제목/요약/키워드: Residual effect

검색결과 2,300건 처리시간 0.034초

Improvement of Pre-harvest Sprouting Resistance in Korean japonica Varieties through a Precision Marker-based Breeding

  • Kamal Bhattarai;Patricia Izabelle Lopez;Sherry Lou Hechanova;Ji-Ung Jeung;Hyun-Sook Lee;Eok-Keun Ahn;Ung-Jo Hyun;Jong-Hee Lee;So-Myeong Lee;Jose E. Hernandez;Sung-Ryul Kim
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2022년도 추계학술대회
    • /
    • pp.269-269
    • /
    • 2022
  • Pre-harvest sprouting (PHS) on rice panicles is getting problematic in recent several years in Korea due to climate changes such as high temperature and more frequent typhoons during harvesting season. PHS negatively affects grain quality severely and also yield. Genetic improvement of Korean varieties (Oryza sativa ssp. japonica) through a marker assisted-backcross breeding (MAB) with the known PHS resistant genes must be one of ideal solutions. However, the final breeding products of MAB occasionally exhibit unwanted traits, especially the cross between genetically distant parents. This might be caused by linkage drag and/or presence of the gene-unlinked donor introgressions, resulting that the final products could not be released to the farmers. The major PHS resistance gene, Sdr4 (Seed dormancy 4) originated from an indica cultivar, Kasalath was selected as a donor gene. In order to avoid unexpected phenotypes in the breeding products, we performed a precision marker-based breeding (PMBB) consisting of foreground, recombinant, and background selections (FS, RS, and BS) which aim to develop 'single small introgression lines' (~100 kb introgression). Korean varieties (Ilpum and Gopum) were crossed with Kasalath. We developed Sdr4-allele specific markers for FS and a set of polymorphic flanking markers near the Sdr4 (-350kb and +420kb) for RS. To minimize linkage drag, the small introgression (< 125kb) containing Sdr4 was selected in Ilpum background (BC2F4) through 1st RS with ~1,200 F2 or BC1F2 plants (one side trimmed) and then 2nd RS with ~1,000 progenies from the 1st RS selected plants (another side trimmed). After RS, the selected lines were genotyped by using Infinium 7K SNP chip to detect other donor introgressions and the lines were backcrossed. Currently BS is on-going from the backcross-derived progenies with BS markers to remove residual introgressions. During the PMBB process, genetic effect of Sdr-4-Kasalath allele was confirmed in Ilpum and Gopum backgrounds by PHS phenotyping using the segregating BC2F3 or BC1F4 materials. The Sdr4 PMBB lines in Ilpum background (< 125kb introgression) will be valuable genetic resources to improve PHS resistance in modem popular temperate japonica varieties.

  • PDF

최적화 설계를 통한 과긴장 앵커의 하중-저항계수 산정 연구 (A Study on the Calculation of Load Resistance Factor of over Tension Anchors by Optimization Design)

  • 이성규;이영진;송용재;조태준;이강일
    • 한국지반신소재학회논문집
    • /
    • 제22권4호
    • /
    • pp.17-26
    • /
    • 2023
  • 강연선의 손상 및 파단위험에 대하여 적극적으로 대처하기 위해서는 기존의 사후 유지관리 체계만으로는 한계가 있으며 시설물의 내구성, 안전성 저하를 정량적으로 평가 및 예측하고 시설물의 자산가치를 고려한 합리적인 유지관리 체계의 구축이 요구된다. 따라서 가설앵커에 큰 결함이 발생하기 전 사전조치가 이루어지도록 하는 선제적 유지관리 방안을 고려해볼 가치가 있다. 이를 위해 본 연구에서는 선제적 과긴장 공법을 고안하여 설계 및 현장시험을 통해 그 효과를 검토하고 신뢰성 기반 최적화 설계를 수행하여 저항계수를 산정하였다. 이때 과긴장 앵커의 흙막이 가시설 지지효과는 강연선 파단전 유효긴장력에 대한 강연선 파단후 잔존긴장력의 비를 이용하여 평가하였으며 저항계수는 각 확률변수에 대한 최적해를 Excel solver를 이용하여 구하고 이를 한계상태식에 적용하여 산정하였다. 연구결과 과긴장률이 125%~130%인 경우 강연선 파단 후에도 높은 흙막이 가시설 지지효과를 보였으며 최적화 설계결과 하중계수(γ)는 1.25, 저항계수 Φ1, Φ2, Φ3은 0.7, 0.5, 0.6을 적용함이 적절한 것으로 나타났다.

새만금 배수갑문 운영에 따른 염분 변화와 저층수의 입자교환 모의 (Salinity Changes and Bottom Water Particle Exchange Simulations in Response to Sluice Gate Operations at Saemangeum Lake)

  • 박성화;김종구;권민선
    • 해양환경안전학회지
    • /
    • 제29권6호
    • /
    • pp.562-575
    • /
    • 2023
  • 새만금 호의 수질 개선을 위하여 국가에서 해수 유통을 증가시킴에 따라 해수 유통 빈도 증가로 인한 새만금 호 내 염분과 저층수 교환 변화를 알아보기 위하여, EFDC(Environmental Fluid Dynamics Code) 모델을 이용하였다. 갑문 개폐 횟수를 하루 1회에서 2회로 증가했을 때, 새만금 호 내부 수위는 최대 약 0.7 m 상승하였다. 염분은 서측 방조제 근방에서 2.12 psu 증가하였으며, 담수 유입 부근에서는 1.18 psu 감소하였다. 입자추적을 이용하여 저층수 교환 정도 분석한 결과, 수심 5m 이하 입자 잔류율은 Case 2(1일 2회 개방)에서 Case 1(1일 1회 개방)에 비해 2.52% 감소한 것으로 나타났다. 이는 수문 개폐 횟수를 증가시켰을 때, 저층수 교환이 더 활발해 질 수 있다는 것을 알 수 있다. 따라서 해수 유통 증가에 따른 염분 및 저층수 교환 증가로 새만금 호의 수질 개선이 될 수 있다고 판단된다.

Mechanical behavior of 316L austenitic stainless steel bolts after fire

  • Zhengyi Kong;Bo Yang;Cuiqiang Shi;Xinjie Huang;George Vasdravellis;Quang-Viet Vu;Seung-Eock Kim
    • Steel and Composite Structures
    • /
    • 제50권3호
    • /
    • pp.281-298
    • /
    • 2024
  • Stainless steel bolts (SSB) are increasingly utilized in bolted steel connections due to their good mechanical performance and excellent corrosion resistance. Fire accidents, which commonly occur in engineering scenarios, pose a significant threat to the safety of steel frames. The post-fire behavior of SSB has a significant influence on the structural integrity of steel frames, and neglecting the effect of temperature can lead to serious accidents in engineering. Therefore, it is important to evaluate the performance of SSB at elevated temperatures and their residual strength after a fire incident. To investigate the mechanical behavior of SSB after fire, 114 bolts with grades A4-70 and A4-80, manufactured from 316L austenitic stainless steel, were subjected to elevated temperatures ranging from 20℃ to 1200℃. Two different cooling methods commonly employed in engineering, namely cooling at ambient temperatures (air cooling) and cooling in water (water cooling), were used to cool the bolts. Tensile tests were performed to examine the influence of elevated temperatures and cooling methods on the mechanical behavior of SSB. The results indicate that the temperature does not significantly affect the Young's modulus and the ultimate strength of SSB. Up to 500℃, the yield strength increases with temperature, but this trend reverses when the temperature exceeds 500℃. In contrast, the ultimate strain shows the opposite trend. The strain hardening exponent is not significantly influenced by the temperature until it reaches 500℃. The cooling methods employed have an insignificant impact on the performance of SSB. When compared to high-strength bolts, 316L austenitic SSB demonstrate superior fire resistance. Design models for the post-fire mechanical behavior of 316L austenitic SSB, encompassing parameters such as the elasticity modulus, yield strength, ultimate strength, ultimate strain, and strain hardening exponent, are proposed, and a more precise stress-strain model is recommended to predict the mechanical behavior of 316L austenitic SSB after a fire incident.

Effect of Ethanol Fractionation of Lignin on the Physicochemical Properties of Lignin-Based Polyurethane Film

  • Sungwook WON;Junsik BANG;Sang-Woo PARK;Jungkyu KIM;Minjung JUNG;Seungoh JUNG;Heecheol YUN;Hwanmyeong YEO;In-Gyu CHOI;Hyo Won KWAK
    • Journal of the Korean Wood Science and Technology
    • /
    • 제52권3호
    • /
    • pp.221-233
    • /
    • 2024
  • Lignin, a prominent constituent of woody biomass, is abundant in nature, cost-effective, and contains various functional groups, including hydroxyl groups. Owing to these characteristics, they have the potential to replace petroleum-based polyols in the polyurethane industry, offering a solution to environmental problems linked to resource depletion and CO2 emissions. However, the structural complexity and low reactivity of lignin present challenges for its direct application in polyurethane materials. In this study, Kraft lignin (KL), a representative technical lignin, was fractionated with ethanol, an eco-friendly solvent, and mixed with conventional polyols in varying proportions to produce polyurethane films. The results of ethanol fractionation showed that the polydispersity of ethanol-soluble lignin (ESL) decreased from 3.71 to 2.72 and the hydroxyl content of ESL increased from 4.20 mmol/g to 5.49 mmol/g. Consequently, the polyurethane prepared by adding ESL was superior to the KL-based film, exhibiting improved miscibility with petrochemical-based polyols and reactivity with isocyanate groups. Consequently, the films using ESL as the polyol exhibited reduced shrinkage and a more uniform structure. Optical microscope and scanning electron microscope observations confirmed that lignin aggregation was lower in polyurethane with ESL than in that with KL. When the hydrophobicity of the samples was measured using the water contact angle, the addition of ESL resulted in higher hydrophobicity. In addition, as the amount of ESL added increased, an increase of 7.4% in the residual char was observed, and a 4.04% increase in Tmax the thermal stability of the produced polyurethane was effectively improved.

감자뿔나방에 대한 16종 살충제의 살충활성과 생물적 특성에 미치는 영향 (Insecticidal Activity and Effect on Biological Characteristic of 16 Insecticides Against Phthorimaea Operculella (Lepidoptera: Gelechiidae))

  • 안정진;박준원;김주일;김현경;구현나;김길하
    • 농약과학회지
    • /
    • 제17권4호
    • /
    • pp.363-370
    • /
    • 2013
  • 시판중인 16종의 살충제를 이용하여 감자뿔나방(Phthorimaea operculella)의 발육단계별 약제감수성을 조사하고, 효과가 뛰어난 약제를 선발하여 접촉 및 섭식독성과 잔효성을 조사하였다. 또한 성충에 대한 사충률과 수명 및 산란수에 미치는 영향을 조사하였다. 감자뿔나방의 알과 번데기에 대해서는 spinosad만이 추천농도에서 71.1%의 부화억제율과 66.7%의 우화억제율을 나타내었다. 3령 유충에 대한 섭식독성과 접촉독성 평가에서 90% 이상의 섭식독성을 나타낸 약제는 fenitrothion ($LC_{50}$ 336.6 ppm), esfenvalerate ($LC_{50}$ 8.6 ppm), ethofenprox ($LC_{50}$ 35.7 ppm), emamectin benzoate ($LC_{50}$ 0.05 ppm)이고, 90% 이상의 접촉독성을 나타낸 약제는 esfenvalerate ($LC_{50}$ 0.87 ppm), ethofenprox ($LC_{50}$ 16.5 ppm), emamectin benzoate ($LC_{50}$ 0.53 ppm), spinosad ($LC_{50}$ 2.48 ppm)이었다. 성충에 대해서 추천농도로 살충율을 조사한 결과, 약제처리 48시간 후 deltamethrin과 spinosad가 100%, esfenvalerate, ethofenprox, thiamethoxam이 40~60%였으며, 그 외 약제는 효과가 거의 없었다. 암컷성충의 산란수는 무처리의 101개에 비하여 esfenvalerate 3.0개, emamectin benzoate 6.7개, dinotefuran 8.3개로 크게 억제되었다. 성충수명은 무처리의 9.3일에 비하여 시험약제는 7.3~8.3일로 약간 짧았다. 잔효성은 emamectin benzoate가 처리 후 14일차까지도 100%의 높은 살충효과를 나타내었고, ethofenprox가 7일차까지 90% 이상의 살충효과를 보였다.

척수신경손상에 대한 흥분성 아미노산 수용체 길항제의 효과에 대한연구 (Studies About the Effect of Excitatory Amino Acid Receptor Antagonist on Traumatic Spinal Cord Injury)

  • 김종근
    • 대한약리학회지
    • /
    • 제31권1호
    • /
    • pp.1-9
    • /
    • 1995
  • 외상성 척추신경손상후에 병리조직학적 변화가 서서히 일어나며, 손상부위가 안정화되는데 걸리는 시간이 길어서 2차 손상과정이 최초의 기계적 손상을 악화시킴이 오래전부터 잘 알려져 있다. 이러한 2차 손상과정의 개입은 척추신경손상을 약리학적으로 조절하는 시도에 대한 논리적 배경을 제공하고 있다. 흥분성 아미노산은 척수의 정상기능뿐아니라 허혈성 및 외상성 손상에 의한 세포사망에 관여함이 알려져 있어 외상성 척수손상의 2차 손상과정에 이 흥분성 아미노산 수용체가 관여할 것임이 시사되고 있다. Dextrorphan은 화학적으로 우선성 morphinan계통의 약물로 흥분성 아미노산 수용체의 하나인 NMDA 수용체의 선택적 길항제이고 임상적으로 사용가능성이 조사되고 있는 약물이다. 본 연구는 dextrorphan의 처리가 쥐의 척수신경손상후에 나타나는 후지운동기능의 회복과정 및 조직학적 변화에 어떻게 영향을 미치는지를 관찰하여 척수손상 후 일어나는 2차 손상과정에 NMDA 수용체의 개입여부를 확인하고자 하였다. 후지운동기능 회복은 open field test(21 point scale)를 사용하였으며 조직학적 손상의 크기는 손상 8주후에 정량적 조직병리학 방법을 사용하였다. 성숙 자성 Long-Evans 쥐 (무게 $250{\sim}300gm$)를 pentobarbital sodium 마취 (복강내, 40 mg/kg)하에서 9번째 및 10번째 흉추부위의 추궁절재술을 시행하여 10g 무게의 막대를 25mm의 높이에서 노출된 경막에 떨어뜨려 척추손상을 유발하였다. 대조군 (n=15)은 생리식염수를 약물투여군 (각 n=10)은 dextrophan 15 mg/kg, 30mg/kg을 척수손상유발 15분전에 복강내로 투여하였다. Dextrorphan 처리는 척수손상에 의한 동맥압 변동 및 동맥혈액 가스치 (pH, $Pco_2,\;Po_2$)에 영향을 미치지 않았다. 척수손상 2일부터 open field test를 시작하여 일주일에 두번씩 술후 8주간 시행하였다. 첫 $2{\sim}3$일 후에는 후지운동을 전혀 관찰할 수 없었으며 그후 2주일까지 약간 빠른 회복을 보여 후지관절의 운동을 보이고 몸무게를 지탱하였으며 $4{\sim}5$주에는 일부 동물에서는 비정상적인 걸음을 보였다. 그 이후에는 더 이상의 후지운동기능의 회복은 볼 수 없었다. Dextrorphan 투여는 이러한 후지운동회복기능 뿐 아니라 조직손상의 크기에도 전혀 영향이 없었다. 이상의 결과는 NMDA 수용체는 외상성 척추손상 후 일어나는 2차 손상과정에 관여하지 않음을 시사하고 있다.

  • PDF

볏짚과 규회석(珪灰石) 시용(施用)이 수도(水稻)의 생육(生育) 및 수량(收量)에 미치는 효과(效果) (Effects of Rice Straw and Wollastonite Application on the Growth and Yield of the Rice Plant)

  • 정광용;조성진;김재정
    • 한국토양비료학회지
    • /
    • 제18권2호
    • /
    • pp.148-155
    • /
    • 1985
  • 수도(水稻)의 생육(生育)과 수량(收量)에 미치는 볏짚과 규회석(珪灰石)의 효과(效果)를 규명코져 볏짚은 무시용(無施用)과 88g/pot(1000kg/10a)로 2수준, 규회석(珪灰石)은 무시용(無施用)(50ppm), 27(150ppm), 85(300ppm), 135g/pot(450ppm조절량) 4수준을 각각 다르게 처리하고 pot 시험(試驗)을 한 결과(結果)는 다음과 같다. 1. 볏짚이나 규회석(珪灰石) 단용(單用)을 수도(水稻)의 초기생육(初期生育)을 억제(抑制)시켰으나 이들의 병용구(倂用區)에서 이상적인 초형(草型)으로 발달(發達)되어 특히 최고분운기(最高分芸期) 이후(以後)에 효과(效果)가 매우 커서 정조수량(正租收量)이 증가(增加)되었다. 2. 볏짚 무시용구(無施用區)는 규회석(珪灰石) 27g/pot구(區)에서 모두 정조수량(正租收量)이 많았고 볏짚 시용구(施用區)에서는 시용당년(施用當年)에는 규회석(珪灰石) 85g/pot구(區), 그리고 다음해의 잔효구(殘效區)에서는 규회석(珪灰石) 135g/pot구(區)에서 정조수량(正租收量)이 가장 많아 볏짚시용(施用)은 규산(硅酸)의 요구량(要求量)을 증가(增加)시키는 것으로 나타났다. 3. 처리간(處理間)에 최고수량(最高收量)을 낸 구(區)는 시비년도(施肥年度)에는 볏짚+규회석(珪灰石) 85g/pot구(區)로서 대조구(對照區)보다 25%의 정조수량(正租收量)이 증대(增大)되었다. 볏짚과 규회석(珪灰石)의 잔효(殘效)를 본 익년도(翌年度)에서는 볏짚+규회석(珪灰石) 135g/pot구(區)가 대조구(對照區)보다 30%의 증가(增加)를 보여 볏짚이나 규회석(珪灰石) 단용(單用)보다 병용효과(倂用效果)가 컸었다.

  • PDF

Butachlor와 규산질비료(珪酸質肥料)의 수도(水稻)에 대(對)한 상호작용(相互作用) (Butachlor and Silicate Fertilizer Interaction to Rice)

  • 오병열;양환승;신용화
    • 한국잡초학회지
    • /
    • 제4권1호
    • /
    • pp.52-61
    • /
    • 1984
  • 수도작(水稻作)에 있어 토양비옥도(土壤肥沃度) 증진(增進) 및 생산성(生産性) 증대(增大)에 필수적(必須的)인 규산질비료(珪酸質肥料)의 시용(施用)과 butachlor의 수도(水稻)에 대(對)한 상호작용(相互作用)을 구명(究明)하기 위하여 진주(眞珠)벼(Japonica 型)와 서광(曙光)벼 (Japonica ${\times}$ Indica 형(型))를 대상(對象)으로 실내(室內) 및 pot 시험(試驗)을 통(通)하여 생물(生物), 화학적(化學的)으로 검토(檢討)한 바 그 결과(結果)는 다음과 같다. 1. $SiO_2$ 150ppm에서 수도유묘(水稻幼苗)의 생장(生長)을 촉진(促進)하였으나 300ppm이상(以上)에서는 억제효과(抑制效果)가 있었으나 butacholor의 수도생장저해작용(水稻生長沮害作用)을 증대(增大)시켰다. 2. 규산질비료(珪酸質肥料) 150kg/10a 시용수준(施用水準)의 pot 시험(試驗)에서 butachlor의 nitrofen에 의(依)한 수도생육(水稻生育)은 영향(影響)을 받지 않았으나 300kg/10a에서는 butacholr가 표준약량(標準藥量)에서 서광(曙光)벼의 초기생육(初期生育)을 현저(顯著)히 저지(沮止)하였다. 규산질비료(珪酸質肥料)와 butachlor에 의(依)한 수도생육억제(水稻生育抑制)는 약제처리(藥劑處理) 50 일후(日後)에 완전(完全)히 회복(回復)되었다. 3. 규산질비료시용(珪酸質肥料施用)에 의(依)한 토양(土壤)의 butachlor 흡차이(吸差異)은 변화(變化)가 없었으나 토양산도(土壤酸度)는 다소(多少) 증가(增加)하는 경향(傾向)이었다. 4. 규산질비료(珪酸質肥料)의 시용(施用)은 담수토양중(湛水土壤中) butachlor의 분해(分解)에 영향(影響)이 없었으나 $SiO_2$ 처리(處理)로 수도근부(水稻根部)에의 제초제(除草劑) 부착량(附着量)은 증가(增加)하였다. 5. 수도체내(水稻體內) butachlor의 흡수량(吸收量)은 $SiO_2$의 첨가(添加)로 서광(曙光)벼에서 증진(增進)되었으며 흡수량(吸收量)의 대부분(大部分)은 근부(根部)에 존재(存在)하였다. 6. 치환성(置換性) 염기(鹽基)에 의(衣)한 butachlor의 수도체내흡수(水稻體內吸收)는 $K_2O$가 촉진효과(促進效果)를 나타낸 반면(反面) $Na_2O$는 영향(影響)이 없었고 CaO는 감소(減少)시키는 경향(傾向)이었다. 7. $SiO_2$에 의(依)하여 수도체내(水稻體內)에 흡수(吸收)된 butachlor의 분해양상(分解樣相)은 무처리(無處理)와 차이(差異)가 없었고 진주(眞珠)벼보다 서광(曙光)벼에서 높게 유지(維持)되었다.

  • PDF

한 농촌 지역에서 식품섭취빈도조사로 측정된 영양소 섭취 분포에 유지류와 양념류가 미치는 영향 (The Effect of Seasoning on the Distribution of Nutrient Intakes by a Food-Frequency Questionnaire in a Rural Area)

  • 윤성하;최보율;김미경
    • Journal of Nutrition and Health
    • /
    • 제42권3호
    • /
    • pp.246-255
    • /
    • 2009
  • 식품섭취빈도조사지는 식품 목록 종류의 구성방식에 띠라 식품을 기초로 한 조사지와 음식을 기초로 한 두가지 형태로 나누는데, 식품을 기초로 한 조사지는 유지류와 양념류의 영양소를 반영하지 못한다는 문제점이 지적되고 있다. 이 연구는 유지류와 양념류가 대상자 영양소 섭취량과 섭취 분포에 미치는 영향을 파악하고자, 한 농촌지역에서 식생활 요인 평가를 위해 개발하여 사용되고 있는 음식을 기초로 한 식품 빈도조사지를 이용하여, 1) 전체 영양소 섭취량, 2) 유지류를 제외한 영양소 섭취량, 3) 유지류와 양념류를 제외한 영양소 섭취량, 위의 3가지 형태의 영양소 섭취량을 산출하여 영양소 섭취량의 비교와 상관성, 영양소 섭취 분포 일치도를 분석하였다. 그 결과, 총 영양소 섭취량과 유지류를 제외한 영양소 섭취량을 비교하였을 때, 유지류를 제외한 경우, 열량, 식물성지방, 비타민 E 섭취량이 유의하게 낮아졌고, 단순 카파지수는 각각 0.95 (${\kappa}{\omega}$ = 0.98), 0.64 (${\kappa}{\omega}$ = 0.81), 0.59 (${\kappa}{\omega}$ = 0.79) 였다. 유지류와 양념류를 모두 제외한 영양소 섭취량과 총 영양소 섭취량과 비교하면, 유지류와 양념류를 모두 제외하였을 때, 유지류와 양념류에 포함되어 있지 않은 영양소인 동물성 단백질, 동물성 지방, 레티놀을 제외한 대부분의 영양소의 섭취량이 유의하게 낮았고, 그 중 식물성 지방 (K = 0.64, ${\kappa}{\omega}$ = 0.81), 비타민 E (K = 0.59, ${\kappa}{\omega}$ = 0.79), 나트륨 (K = 0.61, ${\kappa}{\omega}$ = 0.80)의 단순 카파지수는 0.8 이하로 다른 영양소에 비해 상대적으로 낮았다. 영양소 섭취 분포 일치도는 열량 보정 후에 조정 전보다 더 낮아졌다. 이상의 연구 결과, 유지류와 양념류를 포함하지 않은 경우 식물성 지방, 비타민 E, 나트륨의 섭취량을 저 평가하였고, 대상자의 영양소 섭취 수준의 분포에 영향을 미쳤다. 따라서, 유지류나 양념류의 조사가 없는 식품기반 식품섭취빈도 조사를 이용하여 질병과의 연관성을 분석할 경우 결과에 대한 해석에 주의해야 한다.