• Journal of Chest Surgery
• /
• v.18 no.4
• /
• pp.605-614
• /
• 1985

The principal aim of surgery for congenital heart anomalies is the establishment of normal hemodynamic function. Palliative and corrective operations are selected with time to attain this end with minimal risk. In recent years, as operative mortality after primary total correction is lower than the mortality after early palliation and delayed correction, corrective operations in infants have increasingly supplanted palliative ones. Two hundred and eighteen infants below 10 kg with congenital heart anomalies underwent primary surgical intervention at Yonsei Medical Center from March 1979 to June 1985. There were 155 infants with VSD, 35 Infants with TOF, 5 infants with ECD, 4 infants with TGV, 3 infants with DORV, 3 infants with Pulmonary atresia, 3 infants with ASD and PDA, 2 infants with DOLV, and the remainders were Sinus Valsalva rupture, residual mitral regurgitation after total correction of ECD, PAPVR, Cor triatriatum, Truncus arteriosus, and Tricuspid atresia. The overall surgical mortality was 15.1%. In the acyanotic group, 13 infants died among 168 infants, and mortality was 7.7%. But in the cyanotic group, the mortality rate was very high and 20 infants died among 50 infants raising the mortality to 40.0%. These poor surgical results in the cyanotic or complicated group was due to inaccurate diagnosis, improper surgical methods and inadequate post-operative care which should be improved.

• Journal of Chest Surgery
• /
• v.17 no.2
• /
• pp.171-176
• /
• 1984

Successful correction of the partial form of atrioventricular[AV] canal is now readily achievable. The most challenging technical features of this anomaly are the associated mitral valvular deformity and the frequent inability to obtain mitral competence. Residual mitral incompetence after repair of mitral cleft figures importantly in the causes of early and late failure. So, accurate and complete repair of the mitral valve cleft might be important. Determination of residual severe mitral regurgitation after repair is desirable to permit mitral valve replacement at the time. We have experienced one case of severe mitral regurgitation which was occurred 6 months after repair of partial form of A-V canal [ASD primum] in 22 years old virgin. Pre-op. left ventriculogram revealed severe mitral regurgitation in this patient. We preferred to perform mitral valve replacement with St. Jude valve in this patient at March 1984. Post-op. course was uneventful to now for 5 months and we report this case, review and discuss the literatures.

• Journal of the Korean Vacuum Society
• /
• v.16 no.2
• /
• pp.91-98
• /
• 2007

The Korea Research Institute of Standards and Science (KRISS) has developed a residual gas analyzer (RGA) calibration system and measured gas sensitivities for two different types QMSs using nitrogen, argon, and helium. Different gas sensitivities were identified according to mass and pressure, so it was revealed that the gas sensitivity correction is necessary for proper use of mass spectrometers.

• Journal of Chest Surgery
• /
• v.25 no.11
• /
• pp.1250-1253
• /
• 1992

A patient with intravascular hemolysis due to residual shunt and right ventricular outflow track obstruction after total correction of TOF was presented. The patient was 29 years old female. She underwented VSD closure with dacron patch, infundibulectomy, pulmonic valvotomy and direct closure of PFO. 8 months after the operation, severe intravascular hemolysis and hemolytic anemia appeared. Conservative therapies were not effective, her general condition and laboratory finding got worse gradually. She underwent reoperation, the shunt was closed and right ventricular outflow tract obstruction was corrected by pulmonary valvotomy, infudibulectomy and transannular patch. After operation, hemolysis disappeared dramatically. Severe hemolysis may induce renal failure and necessitate transfusion frequently. If hemolytic anemia is not corrected by conservative treatment, early reoperation is required.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.2
• /
• pp.136-146
• /
• 2013

In this paper, the residual delay compensation algorithm is proposed for FX-type KJJVC. In case of initial version as that design algorithm of KJJVC, the integer calculation and the cos/sin table for the phase compensation coefficient were introduced in order to speed up of calculation. The mismatch between data timing and residual delay phase and also between bit-jump and residual delay phase were found and fixed. In final design of KJJVC residual delay compensation algorithm, the initialization problem on the rotation memory of residual delay compensation was found when the residual delay compensated value was applied to FFT-segment, and this problem is also fixed by modifying the FPGA code. Using the proposed residual delay compensation algorithm, the band shape of cross power spectrum becomes flat, which means there is no significant loss over the whole bandwidth. To verify the effectiveness of proposed residual delay compensation algorithm, we conducted the correlation experiments for real observation data using the simulator and KJJVC. We confirmed that the designed residual delay compensation algorithm is well applied in KJJVC, and the signal to noise ratio increases by about 8%.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.75-78
• /
• 2002

A simplified methodology is presented to predict fatigue life and residual strength of composite structures. To avoid excessive amount of tests that are required for model characterization, strength degradation parameter is assumed as function of fatigue life. S-N curve is used to extract fatigue life that is required to characterize the stress levels comprising a randomly-ordered load spectrum. And different stress ratios are handled with Goodman correction approach(fatigue envelope). It is assumed that the residual strength is a function of the number of loading cycles and applied fatigue stress amplitude. And the residual strength distribution after an arbitrary load cycles is represented by two parameter Weibull functions.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.5
• /
• pp.720-725
• /
• 2012

Sodium hypochlorite is used worldwide as a water disinfectant and in bleaching agent. Sodium hypochlorite applied to water initially undergoes hydrolysis to form free chlorine consisting of hypochlorous acid(HOCl) and hypochlorite ion($OCl^-$). For free chlorine determination, an electrochemical method is simple due to the electroactivity of free chlorine; it measures current and is free of most reagents. Amperometric free chlorine sensor has been developed with gold (Au)-based electrode. The 3-electrode free chlorine sensor whose working and counter electrodes were Pt exhibited excellent response to HClO at +400mV vs. Ag/AgCl/sat. KCl. In addition, the use of a pH error correction algorithm provided a reliable measurement of residual free chlorine in water sample without any pretreatment in the normal pH range(pH 6~8) of municipal water supply. The free chlorine sensor installed in on-line monitoring system could be used to continually monitor the level of residual free chlorine in real samples.

• Composites Research
• /
• v.16 no.1
• /
• pp.13-18
• /
• 2003

Prediction of composite fatigue life is not a straightforward matter, depending on various failure modes and their interactions. In this paper, a methodology is presented to predict fatigue life and residual strength of composite materials based on Phenomenological Model(non-linear fatigue damage model). It is assumed that the residual strength is a monotonically decreasing function of the number of loading cycles and applied fatigue stress ratio and the model parameters(strength degradation parameter and fatigue shape parameter) are assumed as function of fatigue life. Then S-N curve is used to extract model parameters that are required to characterize the stress levels comprising a randomly-ordered load spectrum. Different stress ratios (${\sigma}_{min}/{\;}{\sigma}_{max}$) are handled with Goodman correction approach(fatigue envelope) and the residual strength after an arbitrary load cycles is represented by two parameter weibull functions.

• Journal of Information Processing Systems
• /
• v.18 no.4
• /
• pp.457-469
• /
• 2022

Hydraulic concrete buildings in the northwest of China are often subject to the combined effects of low-temperature frost damage, during drying and wetting cycles, and salt erosion, so the study of concrete deterioration prediction is of major importance. The prediction model of the relative dynamic elastic modulus (RDEM) of four different kinds of modified concrete under the special environment in the northwest of China was established using Grey residual Markov theory. Based on the available test data, modified values of the dynamic elastic modulus were obtained based on the Grey GM(1,1) model and the residual GM(1,1) model, combined with the Markov sign correction, and the dynamic elastic modulus of concrete was predicted. The computational analysis showed that the maximum relative error of the corrected dynamic elastic modulus was significantly reduced, from 1.599% to 0.270% for the BS2 group. The analysis error showed that the model was more adjusted to the concrete mixed with fly ash and mineral powder, and its calculation error was significantly lower than that of the rest of the groups. The analysis of the data for each group proved that the model could predict the loss of dynamic elastic modulus of the deterioration of the concrete effectively, as well as the number of cycles when the concrete reached the damaged state.

• Archives of Plastic Surgery
• /
• v.47 no.6
• /
• pp.522-527
• /
• 2020

Nasal septoplasty is often required to correct a cosmetic deformity, which is a common reason for patients to present to a plastic surgeon. If nasal septoplasty is insufficient, a residual deformity or nasal obstruction may remain after surgery. Even if the nasal septum is corrected to an appropriate position, nasal congestion could be exacerbated if the turbinate on the other side is not also corrected. Therefore, appropriate treatment is required based on the condition of the turbinates. Herein, we survey recent trends in treatment and review previous research papers on turbinoplasty procedures that can be performed alongside nasal septoplasty.