• Journal of the Korean Data and Information Science Society
• /
• 제13권1호
• /
• pp.105-112
• /
• 2002

In this paper we establish bivariate exponentially weighted moving average (EWMA) control charts for autocorrelated processes using residual vectors. We first derive the residual vectors, their expectation, variance-covariance matrix, then evaluate the control chart based on the average run length (ARL).

• 전자공학회논문지B
• /
• 제33B권3호
• /
• pp.96-108
• /
• 1996

In this paper, we propose an object-oriented coding method in low bit-rate channels using block-based motion vectors and residual image compensation. First, we use a 2-stage algorithm for estimating motion parameters. In the first stage, coarse motion parameters are estimated by fitting block-based motion vectors and in the second stage, the estimated motion parametes are refined by the gradient method using an image reconstructed by motion vectors detected in the first stage. Local error of a 6-parameter model is compensted by blockwise motion parameter correction using residual image. Finally, model failure (MF) region is reconstructed by a fractal mapping method. Computer simulation resutls show that the proposed method gives better performance than the conventional ones in terms of th epeak signal to noise ratio (PSNR) and compression ratio (CR).

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제31권11호
• /
• pp.1474-1482
• /
• 2004

본 논문에서는 적응적 가중치 함수를 이용하여 블록 단위의 모션 벡터를 필터링하는 방법을 제안한다. 제안하는 방법에서는 먼저 인접한 영상을 받아 들여 가변적 크기의 블록 정합 방법을 이용하여 모션 벡터를 추출한다. 그리고 추출된 모션 벡터를 강건 예측에 적용하여 아웃라이어(outlier)를 제거함으로써 강건 예측에서 사용하는 동작 모델에 근접한 모션 벡터만을 추출한다. 제안된 적응적 강건 예측은 연속적인 시그모이드 가중치 함수를 사용하여 정상 자료와 아웃라이어의 소속 정도를 보다 효과적으로 표현한다. 또한, 최소화 기법의 반복 단계에서 잔여에러가 감소함에 따라 점진적으로 시그모이드 가중치 함수를 조율함으로써 정상 자료와 아웃라이어를 보다 유연하게 분리한다. 실험에서는 카메라의 동작이 포함된 비디오 데이타를 입력 받아 성능을 비교 분석함으로써 제안한 방법의 우수함을 보인다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.11-14
• /
• 1996

Performance of the group cumulative sum(CUSUM) control scheme using multiple univariate CUSUM charts is more sensitive to the change of quality control(QC) characteristics than the control chart scheme based on the Hotelling statistics. We examine three group charts for multivariate normal data sets simulated with various correlation structures and shift directions in the mean vector. These group schemes apply the orginal measurement vectors, the scaled residual vectors from the regression of each variable on all others and the principal component vectors respectively to calculating the CUSUM statistics. They are also compared to the multivariate QC charts based on the Hotelling statistic by estimating average run lengths, coefficients of variation of run length and ranks in signaling order. On the basis of simulation results, we suggest a control chart scheme appropriate for specific quality control environment.

• Management Science and Financial Engineering
• /
• 제5권1호
• /
• pp.51-71
• /
• 1999

Performance of the group cumulative sum (CUSUM) control scheme using multiple univariate CUSUM charts is more sensitive to the change of quality control (QC) characteristics than the control chart schemes based on the Hotelling statistic We vexamine three group charts for multivariate normal data sets simulated with various correlation structures and shift directions in the mean vector. These group schemes apply the original measurement vectors, the scaled residual vectors from the re-gression of each variable on all others and the principal component vectors respectively to calculat-ing the CUSUM statistics. They are also compared to the multivariate QC charts based on the Ho-telling statistic by estimating average run lengths, coefficients of variation of run length and ranks in signaling order. On the basis of simulation results, we suggest a control chart scheme appropriate for specific quality control environment.

• 한국통신학회논문지
• /
• 제21권9호
• /
• pp.2341-2348
• /
• 1996

This paper proposes an image compression algorithm that adopts projection scheme on mean-residual metod. Sub-blocks of an image are encoded using mean-residual method where mean value is predicted according to that of neighboring blocks. Projection scheme with 8 directions is applied to the compression of residual signals of blocks. Projection vectors are finite-state vector quantized according to the projection angle of nighboring blocks in order to exploit the correlation among them. Side information to represent the repetition of projection is run-length coded while the information for projection direction is compressed using entropy encoding. The proposed scheme apears to be better in PSNR performance when compared with conventional projection scheme as well as in subjective quality preserving the edges of images better than most tranform methods which usually require heavy computation load.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제32권6호
• /
• pp.512-522
• /
• 2005

본 논문에서는 이음매없는 모자이크 구성을 위한 영상 정렬 방법을 제안한다. 모자이크 구성을 위한 전역 움직임 추정 후, 전역 움직임 계수를 이용하여 모자이크를 구성하려면, 정렬이 올바르게 수행되지 않은 국부 영역이 존재하게 되고, 이러한 국부 영역에서는 선분의 끊김, 흐려짐, 겹침 현상이 일어난다. 전역 움직임 계수에 의해서 정렬되지 않은 국부 영역을 정렬하기 위해서는 잔여 움직임 추정 알고리즘이 필요하다. 그러나, 잔여 움직임 추정을 위해서는 카메라의 초점 거리나 조도 변화와 관계된 변수를 추정해야 하고, 또한 이에따른 많은 계산량을 요구하게 된다. 이러한 문제점을 해결하기 위해서, 본 논문에서는 추가적인 외부 변수의 추정 과정 없이 효율적으로 잔여 움직임을 추정할 수 있는 알고리즘을 제안한다. 제안된 방법에서는 잔여 움직임 추정 과정에서 사용되는 측정 및 추정 윈도우의 크기를 효율적으로 설정함으로써 잔여 움직임 정보를 효과적으로 추정할 수 있다. 제안된 단계적 잔여 움직임 알고리즘을 적용하여 모자이크를 구성함으로써, 전역 움직임 계수에 의해서 정렬되지 않았던 국부 영역의 흐려짐, 겹침 현상을 해결할 수 있음을 실험적으로 확인하였다.

• 한국소음진동공학회논문집
• /
• 제17권1호
• /
• pp.80-87
• /
• 2007

In this paper, a method for identifying the location and extent of a damage in a structure using residual forces was presented. Element stiffness matrix reduction parameters in a finite element model were used to describe the damaged structure mathematically. The element stiffness matrix reduction parameters were determined by minimizing a global error derived from dynamic residual vectors, which were obtained by introducing a simulated experimental data into the eigenvalue problem. Genetic algorithm was used to get the solution set of element stiffness reduction parameters. The proposed scheme was verified using Euler-Bernoulli beam. The results were presented in the form of tables and charts.

• 한국음향학회지
• /
• 제20권5호
• /
• pp.48-53
• /
• 2001

LPC분석 기반 화자 확인에서 잔여성분(residue) 예측은 보통 무시되고, LPCC(LPC-cepstrum)만이 특징 파라미터로 사용된다. 본 연구에서는 잔여성분으로부터 추출된 예측파라미터인 잔여 켑스트럼(residual cepstrum)을 LPCC와 함께 여러 환경에서 구축된 데이터 베이스에서 화자특징 파라미터로 사용하였다. 또한, 잔여 켑스트럼에 포함되어있는 화자 고유성분인 피치(pitch)성분에 큰 가중치(weighting)를 줌으로써 화자간 변이(inter-speaker variation)가 커지도록 하는 가중치 함수를 제안한다. 실험 결과, LPCC만을 특징 파라미터로 사용하였을 경우보다 잔여 켑스트럼 (RCEP)과 LPCC를 동시에 사용했을 경우 약 6％가량의 인식 오류율이 향상 되었으며, 제안한 가중치 함수를 적용한 잔여 켑스트럼 (RCEP)과 LPCC를 동시에 사용했을 경우 인식 오류율이 가중치를 주지 않은 경우보다 약 2.45％가량 개선되었다.

• Journal of applied mathematics & informatics
• /
• 제17권1_2_3호
• /
• pp.457-473
• /
• 2005

In each step of the quasi-minimal residual (QMR) method which uses a look-ahead variant of the nonsymmetric Lanczos process to generate basis vectors for the Krylov subspaces induced by A, it is necessary to decide whether to construct the Lanczos vectors $v_{n+l}\;and\;w{n+l}$ as regular or inner vectors. For a regular step it is necessary that $D_k\;=\;W^{T}_{k}V_{k}$ is nonsingular. Therefore, in the floating-point arithmetic, the smallest singular value of matrix $D_k$, ${\sigma}_min(D_k)$, is computed and an inner step is performed if $\sigma_{min}(D_k)<{\epsilon}$, where $\epsilon$ is a suitably chosen tolerance. In practice it is absolutely impossible to choose correctly the value of the tolerance $\epsilon$. The subject of this paper is to show how discrete stochastic arithmetic remedies the problem of this tolerance, as well as the problem of the other tolerances which are needed in the other checks of the QMR method with the estimation of the accuracy of some intermediate results. Numerical examples are used to show the good numerical properties.