• The Korean Journal of Pesticide Science
• /
• v.12 no.4
• /
• pp.382-390
• /
• 2008

This study was performed to evaluate the acute toxicity and residual toxicity of the 69 kinds of agrochemicals (41 insecticides, 18 fungicides, and 10 acaricides) against honeybee, Apis mellifera and bumblebee, Bombus terrestris. According to the IOBC standard, the toxicity showed below 30% was classified as non-toxic. Among 41 insecticides, five insecticides (acetamiprid, chlorfenapyr, thiacloprid, milbemectin, and buprofezin+amitraz) against the honeybee; eight insecticides (methomyl, thiodicarb, acetamiprid, chlorfenapyr, thiacloprid, abamectin, spino sad, buprofezin+amitraz) against the bumblebee did not show any toxic effect. Therefore, it thought to being safe. Other 18 fungicides and 10 acaricides were safe against the honeybee and bumblebee. In residual toxicity against the honeybee, eight insecticides (dichlorvos, methomyl, imidachlorprid, emamectin benzoate, spinosad, cartap hydrochloride, chlorfenapyr, and endosulfan) among 41 insecticides tested were safe at three days after treatment; however, sixteen insecticides (dimethoate, fenitrothion, fenthion, methidathion, phenthoate, pyraclofos, fenpropathrin, clothianidin, dinotefuran, thiamethoxam, abamectin, acetamiprid+ethofenprox, acetamiprid+indoxacarb, bifenthrin+imidacloprid, ethofenprox+phenthoate, imidacloprid+methiocarb) still remain high toxicity at eleven days after treatment. Against the bumblebee, residual toxicity showed as safe in seven insecticides (dimethoate, methidation, a-cypermethion, ethofenprox, indoxcarb, chlorpyrifos+a-cypennethrin, esfenvalerate+fenitrochion) at three days after treatment; however, eight insecticides (fenitrothion, pyraclofos, clothianidin, fipronil, acetamiprid+ethofenprox, chlorpyrifos+bifenthrin, ethofenprox+phenthoate, imidacloprid+methiocarb) still showed high toxicity at seven days after treatment. From above results, it will be useful information to select insecticides being safe and effective against the honeybee and bumblebee.

• The Korean Journal of Pesticide Science
• /
• v.15 no.3
• /
• pp.310-316
• /
• 2011

This study was performed to evaluate the contact toxicity and residual toxicity of the 26 commercially registered insecticides against cigarette beetle, Lasioderma serricorne and maize weevil, Sitophilus zeamais adult. Among 26 insecticides, seven insecticides (chlorpyrifos, chlorpyrifos-methyl, fenitrothion, fenthion, phenthoate, cypermethrin, ${\alpha}$-cyhalothrin) against L. serricorne adult and five insecticides (chlorpyrifos, chlorpyrifos-methyl, fenitrothion, fenthion, phenthoate) against S. zeamais adult showed perfect mortality, $LC_{50}$ (ppm) values of those selected insecticides were appeared lowest value on ${\alpha}$-cyhalothrin (1.46) against L. serricorne adult and chlorpyrifos-methyl (0.64) against S, zeamais adult, respectively. However, chlorpyrifos-methyl still remain high toxicity until 90th days after treatment against both L. serricorne and S. zeamais adults. From above results, it will be useful information to select insecticides effective against L. serricorne and S. zeamais adults.

• Tribology and Lubricants
• /
• v.18 no.4
• /
• pp.273-278
• /
• 2002

Grease deterioration of mineral oil type grease was investigated using sealed deep groove ball bearings (6203) and bearing life test rig. The bearing test was performed under 3,000 rpm and 245 N radial load at 120。C. Grease taken ken tested bearings was checked in using certain evaluation methods, for example, oxidation induction time (OIT), FT-IR peak intensity, leakage .ate, bleeding .ate, total acid number. (TAN) and bearing noise increase. Within these test conditions, OIT, TAN, bleeding rate were changed gradually in accordance with bearing operating time and showed useful indices for deterioration of grease.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.477-480
• /
• 2000

It is useful way to make indentations near crack tip in order to increase fatigue life or repair a fatigue crack. In this study, bending fatigue tests were performed to investigate the optimal position of the indentations near crack tip. The results shows that fatigue life of the specimen is dramatically increased by indentation and the most effective location is the back of the crack tip.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.12
• /
• pp.3096-3103
• /
• 2000

High temperature material properties of a welded joint were experimentally studied. Tensile and creep properties were measured for each part of weld metal. HAZ(heat affected zone) and parent metal at 538$^{\circ}C$. HAZ metal was obtained by a simulated heat treatment. Results showed that the order of tensile strength is weld>HAZ> parent both at 24$^{\circ}C$ and at 538$^{\circ}C$. Creep resistance was also the highest for weld metal and lowest for parent metal. Creep rupture life curves were obtained and converted to Monkman-Grant relation which is useful for life assessment. Use of the data obtained in this study is discussed.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.368-376
• /
• 2003

In this research, DLC thin films are produced as several hundred nm thickness by PE-CVD method. And then these thin films are estimated tribological characteristics to find out useful possibilities as a protecting film for high-quality function and life extension at MEMs by mechanical properties observation . These are measured thickness and residual stress of DLC coating. Compared after measuring friction coefficient, adhesion force, hardness, cohesive force of coating films. As results all test, we can decide several conclusions. First, friction coefficient decreased, as the load increased. otherwise, friction coefficient increased, as thickness of coating film increased under low load$(1\~50mN)$. Secod, adhesion force increased as thickness of coating films. Third, hardness of coating film is affected by substrate coating film when it is less than thickness of 300nm and it has general hardness of DLC coating film when it is more than thickness of 500nm. Fourth, cohesive force of coating film is complexly affected by hardness, adhesion force, residual stress, etc.

• Microbiology and Biotechnology Letters
• /
• v.36 no.4
• /
• pp.360-365
• /
• 2008

For the screening of residual antibiotics in foods, bioassays and microbiological inhibitor tests are commonly applied. These methods are tested by the various susceptibility of bacteria against different kinds of antibiotics. However, the sensitivity of bioassay is generally insufficient to detect some residual antibiotics at level of interest. This study was performed to investigate the detection limit of variable antibiotics of the bioassay and to improve the sensitivity to some antibiotics. The sensitivity of bioassay using Bacillus megaterium ATCC 9885, B. subtilis ATCC 6633, B. cereus ATCC 11778 and Geobacillus stearothermophilus ATCC 10149 was low in the detection of macrolides, quinolones, chloramphenicol, and monensin. On the contrary, Micrococcus luteus ATCC 9341 showed high sensitivity to macrolides and Escherichia coli ATCC 11303 was highly sensitive to quinolones and aminoglycosides. Consequently, both strains would be useful to improve sensitivity of bioassay with a wide detection range.

• Structural Engineering and Mechanics
• /
• v.53 no.6
• /
• pp.1183-1200
• /
• 2015

Reinforcement corrosion can cause serious safety deterioration to aging concrete structures exposed in aggressive environments. This paper presents an approach for reliability analyses of deteriorating reinforced concrete structures affected by reinforcement corrosion on the basis of the representative symptoms identified during the deterioration process. The concrete cracking growth and rebar bond strength evolution due to reinforcement corrosion are chosen as key symptoms for the performance deterioration of concrete structures. The crack width at concrete cover surface largely depends on the corrosion penetration of rebar due to the expansive rust layer at the bond interface generated by reinforcement corrosion. The bond strength of rebar in the concrete correlates well with concrete crack width and decays steadily with crack width growth. The estimates of cracking development and bond strength deterioration are examined by experimental data available from various sources, and then matched with symptom-based lifetime Weibull model. The symptom reliability and remaining useful life are predicted from the predictive lifetime Weibull model for deteriorating concrete structures. Finally, a numerical example is provided to demonstrate the applicability of the proposed approach for forecasting the performance of concrete structures subject to reinforcement corrosion. The results show that the corrosion rate has significant impact on the reliability associated with serviceability and load bearing capacity of reinforced concrete structures during their service life.

• Journal of Applied Biological Chemistry
• /
• v.65 no.3
• /
• pp.173-181
• /
• 2022

This study was carried out to investigate the residual characteristics of flubendiamide in kale to establish pre-harvest residue limits (PHRL) and the removal efficiency according to the washing solvent and method. Field tests were conducted at two different greenhouses, field 1 (Anseong-si, Gyeonggi-do) and field 2 (Incheon-si, Gyeonggi-do). According to the safe use guidelines kale was sprayed with flubendiamide twice every 10 days and harvested 0 (after 2 h), 1, 2, 3, 5, 7 and 10 days after the final application. The biological half-live of flubendiamide in kale was calculated based on dissipation curves of the pesticide in samples analyzed by liquid chromatography coupled with tandem mass spectrometry. In the analysis, method limits of quantitation (MLOQ) were 0.01 mg/kg, and recoveries performed with two different fortification levels of 10 MLOQ and maximum residue limit (0.7 mg/kg) were 104.2±3.6 and 101.9±10.2%, respectively. The dissipation rate constant of flubendiamide in kales were 0.2437 at field 1 and 0.1981 at field 2. PHRL calculation equations obtained using the dissipation constants estimated as follows: if the residual concentration of flubendiamide in kale on 10 days before harvest is less than 8.0 mg/kg, the residual concentration on the harvest would be under MRL. The removal of flubendiamide from kale was the greatest when it was washed with vinegar (39.8%), followed by baking soda (31.7%), calcium powder (30.2%), neutral detergent (27.2%), and tap water (15.9%). The results of this study would be useful for both farmers and consumers to produce or consume safe agricultural products.

• Journal of Environmental Health Sciences
• /
• v.33 no.5
• /
• pp.428-433
• /
• 2007

To clarify the pioneer group in the development of biofilms in high chlorine residual water, a semi-pilot model system was operated and 16S rDNA V3 targeted PCR-DGGE was submitted. Biofilm formation occurred rapidly in the model of a drinking water distribution system. It reached $10^3\;CFU/cm^2$ or more on the surface of stainless steel, PVC, and galvanized iron in chlorinated (1.0 mg/l) water within a week. Within a week, uncultured Proteobacteria- and Bacillales group-like sequences were detected and Sphingomonas-like sequences were identified from all season and all pipe materials tested. Hence Sphingomonas species were regarded as the potential pioneer group in the development of biofilm in drinking water and this results would be useful for the prevention of biofilm formation and safety of drinking tap water.