• 한국정밀공학회지
• /
• 제14권9호
• /
• pp.61-67
• /
• 1997

Hardened layer and compressive residual stress created by carburized treatment effect on bending strength of gear massively. Also, shot peening treatment improves the strength of carburized gear as it does the hardness and residual stress of surface layer. In these days shot peening techniques are welcomed as one of physical improvement ways around the surface of materials. It is used widely because qualitative analysis of shot peening has become possible and surface treatment can be done with very little costs comparaed to other surface improvement methods. Therefore this study investigates the effect of shot peening in surface shape and bending fatigue strength after doing many kinds of shot peening treatments, then doing fatigue test and also explained characteristics of shot peening gear.

• Journal of Welding and Joining
• /
• 제20권2호
• /
• pp.59-64
• /
• 2002

When the vehicle travels in an actual road, resistance spot weldments of the vehicle structure are exposed to complex loading state. Since the fatigue strength in resistance spot weldment of vehicle body can be determined by effect of residual stresses and loading state of driving, estimating actual loading state and considering residual stress effect are needed. In this study, Fatigue stress-fatigue life relation concerned residual stress effect was obtained by thermo elastic plastic finite element analysis. And applied loading in resistance spot weldments of vehicle body was calculated by dynamic analysis. Presumption of fatigue life was performed using proposed method

• 대한기계학회논문집A
• /
• 제20권6호
• /
• pp.1836-1842
• /
• 1996

In this paper, static and fatigue bending strengths of CFRP(carbon fiber reinforced plastic laminates having impact damage(FOD) are evaluated. Composite laminates used for this experiment are CF/EPOXY and CF/PEEK orthotropy laminated plates, which have two-interfaces[${0^0}_4{90^0}_4}$]$_sym$. A steel ball launched by the air gun colides against CFRP laminates to generate impact damages. The damage growth during bending fatigue test is observed by the scanning acoustic microscope(SAM). When the impacted side is compressed, the residual fatigue bending strength of CF/PEEK specimen P is greater that that of CF/EPOXY SPECIMEN B. On the other hand, when the impacted side is in tension, the residual fatigue bending strength of CF/PEEK speicemen P is smaller than that of CF/EPOXY specimen B. In the case of impacted-side compression, fracture is proposed from the transverse crack generated near impact point. On the other hand, fracture is developed toward the impact point from the edge of interface-b delamination in the case of impacted-side tension.

• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.247-258
• /
• 2000

It is thought that impact damages and hygrothermals can affect to CFRP (Carbon-fiber reinforced plastic) composite laminated due to the sensitivity on the composite laminated Therefore, this paper focuses on the fracture mechanisms experimentally based on a scanning acoustic microscope (SAM) when subjected to impact damages, i.e., foreign object damages(FOD), and also the influence of impact damages and hygrothermals on residual fatigue bending strength of CFRP laminates. Composite laminates used in the experiment are CF/EPOXY orthotropy laminated plates, which constist of two-interfaces [04/904]s. A steel ball launched by an air gun collides against CFRP laminates to generate impact damages. Bending fatigue tests are periodically interrupted for a nondestructive evaluation (NDE) measurement of the progrossive damages to built the fracture mechanism by impact damages, and three-point fatigue bending tests are carried out to investigate the influence of hygrothermals on the effect on the residual bending fatigue strength of CFRP laminates.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.333-338
• /
• 2000

Induction surface hardening is widely used to enhance local strength and hardness. However, most research is only to have a focus on fatigue life and fatigue behavior is not so much studied. So, in this study, Cr-Mo steel alloy(SCM440) was used to show the effect of residual stress and micro hole on the fatigue strength for base metal and induction surface hardened specimen. In addition, the fatigue characteristic between surface hardened and fully hardened steel is somewhat different. It is caused by hardness distribution, residual stress and inclusions etc.. Crack origins are generally micro inclusions for the high strength steel. So, the distribution of inclusions is analyzed statistically.

• Composites Research
• /
• 제16권1호
• /
• pp.13-18
• /
• 2003

복합재료의 피로수명을 평가하는 것은 여러 가지 파손모드와 파손모드 간의 강호작용 때문에 복잡하다. 본 논문에서는 현상론적인 모델(비선형 강도저하 모델)을 이용하여 피로수명과 잔류강도를 예측할 수 있는 방법을 제시하였다. 잔류강도를 하중 사이클 수와 피로응력의 함수로 가정하였으며, 계산에 필요한 모델변수(강도저하 파라미터, 피로수명형상 파라미터)를 피로수명의 함수로 가정하였다 임의로 배열된 하중 스펙트럼 상에서 응력수준에 따른 모델 매개변수를 구하기 위해 S-N 선도를 이용하였고, 상이한 응력비에 대하여 전술한 매개변수를 Goodman식의 보정을 통하여 계산하였다(피로선도). 임의의 하중이력 후의 잔여강도 분포를 2모수 weibull 함수로 표현하였다.

• 한국정밀공학회지
• /
• 제11권6호
• /
• pp.12-19
• /
• 1994

This paper deals with the bending fatigue strength of SNC815 carburized spur gears. The test gears are heat-treated by two different treatments. One is the direct quenching after car-burization. The other is treated by reheating and quenching. The fatigue test at a constant stress amplitude is performed by using an electrohydraulic servo-controlled pulsating tester. The S-N curves are obtained and illustrated. The fatigue strength of direct quenched gears is higher than that of reheated quenched gears. The fatigue strength is estimated from the hardness and the residual stress by using the experimental formula proposed by Tobe and Inoue. The estimated strength is close to the test results, and the validty of the formular is confirmed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.102-107
• /
• 2004

Suspension part should have enough endurance during its lifetime to protect passenger. Therefore, the coil spring is one of the major suspension part of an automobile. Corrosion fatigue strength of the coil spring depends on many factors including mechanical and environmental properties. In this paper, residual stresses by shot peening was analyzed using finite element analysis and evaluated its effect on corrosion fatigue strength.

• 대한기계학회논문집A
• /
• 제34권10호
• /
• pp.1411-1417
• /
• 2010

탄소섬유강화 복합재료는 높은 비강도, 비강성, 설계유연성 및 우수한 화학적 특성 등으로 인하여 여러분야에서 각광받고 있는 구조재료이다. 대부분의 CFRP 복합재료 제품들은 여러 부품들을 주로 볼트, 핀 등의 기계적인 방법으로 조립하여 제작된다. 볼트나 핀에 의해 발생하는 hole 은 구조물 내에서 노치로 작용하여 부품의 강도저하의 원인으로 작용한다. 본 논문에서는 피로하중에 의한 CFRP 복합재료 홀 노치재의 잔류강도를 실험적으로 평가하였다. 이를 위하여, 시편에 일정 반복 수만큼 피로하중을 부여하였으며, 이후 파괴시험을 통하여 홀 노치재의 잔류강도를 측정하였다. 그 결과, 피로하중으로 인해 하중방향의 균열이 발생하는 것을 확인하였으며 이 균열이 홀의 노치효과를 감소시켜 잔류강도를 증가시키는 것으로 생각되었다. 시편의 잔류강도는 일정 수준까지 증가하다가 감소하는 것으로 평가되었으며, 이를 Reifsneider 등의 평활재 잔류강도 저하모델과 Yip 등의 홀 노치재 응력재분포 함수를 이용하여, 피로하중 하의 홀 노치재 잔류강도 변화를 수식으로 나타내었다.

• 한국기계가공학회지
• /
• 제2권1호
• /
• pp.22-31
• /
• 2003

The compressive residual stress, which is induced by shot peening process, seems to be an Important factor in increasing the fatigue strength. And then it was showed that residual stress was disappearenced at the high temperature. The fatigue charateristic investigation of a SUP9 spring steel processed shot peening is performed by considering the high temperature service conditions in the range of room temperature through $180^{\circ}C$ in the range of stress ratio of 0.3 by means of opening mode displacement. The fatigue resistance characteristics and fracture strength at high temperature is considerable lower than that of room temperature in the early stage and stable of fatigue crack growth region.