• 한국표면공학회지
• /
• 제37권5호
• /
• pp.273-278
• /
• 2004

The requirements of getting spring steel with higher fatigue strength have been increased to achieve the weight reduction of a vehicle. As the possible increment in fatigue strength by using the conventional shot peening treatment is found to be limited, it is necessary to modify the shot peening treatment. In this study, to investigate the effects of warm shot peening on increasing fatigue strength, tests are conducted on spring steel SAE9524. By the results of rotating bending fatigue tests, the fatigue strength increases up to 23.8% in warm shot peening specimens at $200^{\circ}C$ compared with conventional shot peening. The major reason why the warm shot peening is effective to the improvement of fatigue strength is the increment of the compressive residual stress, which can be effectively formed by shot peening under the condition of warm temperature than room temperature.

• 한국CDE학회논문집
• /
• 제21권3호
• /
• pp.234-241
• /
• 2016

Conventional bent plate used in mandibular reconstruction surgery needs safety verification since its mechanical properties are changed due to the plastic deformation during the bending process. In this study we investigate stability of the plastically deformed plate and the plate with the same shape without plastic deformation through the finite element analysis(FEA). First we simulate the process of plate bending to fit the defect in patient. Then, the other plate is modelled to represent a customized plate with the same shape of the plastically deformed one, but without any residual stresses from plastic deformation. After binding these plates to the mandible, we conduct the masticatory simulation. Finally, we compare the resulting Von Mises stress of the customized plate and of the bent plate. The bent plate shows much higher stress than the customized one due to the residual stresses form the bending process. The study shows that plastic deformation in the plate may decrease the safety of the reconstruction surgery.

• 한국해양공학회지
• /
• 제25권3호
• /
• pp.1-10
• /
• 2011

This paper estimates the residual longitudinal strength of a damaged double hull VLCC (Very Large Crude Carrier) under combined vertical and horizontal bending moments using Smith's method. The damage estimated in this study occurred due to collision or grounding accidents. The effects of the randomness of the yield stress, plate thickness, extent of damage, and the combination of these three parameters on the ultimate hull girder strength were investigated. Random variables were generated by a Monte Carlo simulation and applied to the double hull VLCC described by the ISSC (International Ship and Offshore Structures Congress) 2000 report.

• 동력기계공학회지
• /
• 제8권2호
• /
• pp.12-17
• /
• 2004

In this study, to verify the reliability of the indentation for measuring welding residual stresses to get in method we compared the results of the method with those measured by the saw cutting method. Also for the same purpose we used a 4-point bending test and confirmed the reliability of indentation method. The specimens used in this experiment are made with the same conditions for hot reheater pipes and cold reheater pipes used in the electric power plant. Therefore we could know that the results of the methods showed the reliability of the method to obtain welding residual stresses.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.183-186
• /
• 2003

Long shafts for power transmission should transmit torsional load with vibrational stability. Hybrid shafts made of unidirectional fiber-reinforced composite and metal have high fundamental bending natural frequency as well as high torque transmission capability. However, thermal residual stresses due to the coefficient difference of thermal expansion of the composite and metal are developed so that the high residual stresses decrease fatigue resistance of the hybrid shafts, especially at low operating temperatures. In this work, axial compressive preload was given to the shaft in order to change the residual stresses. Static and fatigue torsional tests were performed and correlated with stress analyses with respect to the preload and service temperature.

• 폴리머
• /
• 제38권6호
• /
• pp.752-759
• /
• 2014

본 연구에서는 미세 전자 소자용 절연박막 및 차세대 플렉시블 디스플레이 기판으로서 사용이 기대되는 폴리이미드(PI)에 개환 복분해 중합(ring-opening metathesis polymerization)이 가능한 환형 말단 캡핑제(end-capping agent)인 cis-1,2,3,6-tetrahydrophthalic anhydride(CDBA)로 사슬 말단에 가교 반응이 된 가교형 폴리이미드를 합성하였다. 말단 캡핑제의 조성비에 따른 가교형 폴리이미드 박막의 잔류응력 거동은 thin film stress analyzer(TFSA)를 이용한 wafer bending mothod로 온도에 따라 연속적인 거동을 in-situ로 측정하였다. 열특성은 시차 주사 열량계(DSC), 열기계 분석기(TMA) 및 열 중량 분석기(TGA)를 이용하여 측정하였고, 광학 특성은 자외선/가시광선 분광광도계(UV-vis)와 색차계(spectrophotometer)를 이용하였으며, 네트워크 구조의 모폴로지(morphology) 변화를 통해 해석하였다. 말단 캡핑제의 조성비가 증가함에 따라 잔류응력은 27.9에서 -1.3 MPa로 초저응력 및 향상된 열 특성을 나타내었으나, 광학 특성은 감소됨을 보였다. 가교형 폴리이미드 박막의 우수한 특성 발현은 고집적도 다층 구조의 안정성 및 신뢰도가 요구되는 분야의 응용성이 확대될 것으로 기대된다.

• Journal of Welding and Joining
• /
• 제32권5호
• /
• pp.1-6
• /
• 2014

This study aims at manufacturing SA welded API-X70 line-pipe with sour gas resistance. A pipe was manufactured by JCO bending process and SA welding using the API-X70 plate guaranteed HIC resistance. SA welded pipe was expanded in order to reduce the residual stress. The evaluation of a pipe for resistance to HIC and SSCC were performed by the RS D 0004 and RS D 0005 standards. For verification that a pipe has acceptable resistance to HIC, fullscale test was carried out. Results showed no cracking for the HIC and SSCC.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권6호
• /
• pp.763-770
• /
• 1998

This paper deals with evaluation of bending fatigue strength in SCM415 carburized spur gears. The constant stress amplitude fatigue test is performed by using an electrohydraulic servo-controlled pulsating tester. The S-N curves are obtained and the enhanvement of fatigue strength due to carburized treatment is clarified. In this study the improvement of fatigue strength is assumed to be caused by an increase of both hardness and residual stress and experimental formula has been proposed for the estimation of bending fatigue strength of carburized gears. The effect of surface conditions on the fatigue strength is evaluated quantitatively and it is close to the relative surface condition factor used in the ISO strength rating formula.

• 한국항해항만학회지
• /
• 제32권2호
• /
• pp.121-126
• /
• 2008

This paper presents hull stress monitoring system installed in LNGC damaged by a Typhoon Elongation/contraction of removed areas has been assessed in terms of possible residual stress that will take place in replaced blocks when the applied load is removed. The bending moment of a vessel changes actually in terms of loss of longitudinal members and the change of weight distribution in repair procedure. The change of bending moment affects mainly in hull stress of longitudinal members. Hull stress monitoring system was installed on upper deck to prove LNGC stable in the criteria to be less than 40MPa during the period of repair procedure. A temperature measuring system was also installed to exclude the additional stress due to thermal effect from the measured hull stress. As a result, the hull stress was modified with the data measured by the temperature measuring system. This hull stress considering thermal effect was used as a guide stress to check the safety of LNGC during the period of repair procedure.

• 한국생산제조학회지
• /
• 제7권6호
• /
• pp.126-131
• /
• 1998

The influence of shot peening on the fatigue strength of SCM22 steel is investigated in this work. The shot peening process is applied to the heat treated specimens. Then, basic material properties and residual stresses are evaluated for specimens. Rotate bending and torsional fatigue tests are accomplished to investigate the effects of shot peening on the fatigue strength. experimental results show that the fatigue life was increased tremendously by shot peening. The compressive residual stress, which is induced by shot peening process, seems to be an important factor of increasing the fatigue strength.