• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.468-471
• /
• 2015

The study aims to identify the degree and types of spatial decline in Eup/Myun units within Chungcheong region in South Korea to contribute to the efforts being made to diagnose the rural decline and the potentials. To this end, we analyzed 27 Sis and Guns to identify the degree of decline and potentials of rural areas in Chungcheong region. We also carried out the diagnosis and K-Means Clustering on 274 Eups and Myuns, the smallest administrative units, to figure out the types and characteristics of the rural recessions. According to the results of the clustering analysis carried out on the 166 Eups and Myuns, there were five outstanding clusters. They were; areas with housing deterioration (29), areas with poor economic foundation (16), areas with poor accessibility to central areas (42), areas with poor residential environment (51) and areas with aged population (28). The findings and results of the present study are likely to serve as a basis for the design and enforcement of forthcoming rural area activation policies. Also, it would be highly recommended that a more comprehensive diagnosis is taken from a community-level perspective and policy suggestions and strategies tailored for rural communities are further discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.110-117
• /
• 2017

In the construction of high-rise residential buildings in which the finishing works are done repetitively in each housing unit, the construction period and cost can be reduced, while maintaining the quality, if the work process is properly managed in order for the resources to be input continuously. Time management methods such as the Bar Chart, CPM and LOB are not appropriate, due to the difficulties involved in the diagraming of repetitive works and applying them to the project. The Tact method also has difficulties in maintaining a constant work flow and needs significant effort and cooperation from the subcontractors to allocate the resources consistently. Partitioning, base works for finishing, floor mortar plastering and the final finishing work are done sequentially in residential buildings projects, and there are many repetitive activities which differ in terms of the work method, work area and productivity. If these repetitive activities are synchronized or converged toward the last work area, the goal of process management can be achieved effectively. Therefore, a process planning method for the finishing works of residential building projects is proposed, which takes into consideration elements, such as the sequential relation between the activities in each housing unit and classification of repetitive works in terms of their management method, work area and production rate, for the continuous input of resources into the housing units.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.525-536
• /
• 2009

The current residential process adheres to a traditional method of construction involving wood framing on-site on poured concrete foundations which has been widely applied in North America. A conventional residential construction process can include seventeen distinct stages ranging from stake-out to pre-occupancy inspection. The current practice possesses short comings including high construction material wastes, long scheduling timelines, adverse weather conditions, poor quality, low efficiencies and negative environmental impacts from transportation and equipment use. Over CAN $5 billion dollars was spent in the construction sector during 2007 in Canada. Previous findings in CO₂ emissions during the construction process of a conventional dwelling emphasize more than 45 tonnes of CO₂ emissions. Hence, in Alberta alone during 2007, almost 50,000 residential units would release more than two million tonnes of CO₂. These numbers demonstrate the economical and environmental impact in building construction and its relationship with CO₂ emissions. The aim of this paper is to quantify the CO₂ emissions from the current residential construction process in order to establish the baseline for CO₂ emission reduction opportunities. The quantification collection methodology will be approached by identifying the seventeen various stages of construction and quantifying the contributions of CO₂ from specific activities and their impacts of work for each stage. The approach of separating these into separate stages for collection will allow for independent opportunities for analysis from various independent contractors from the entire scope of work. The use of BIM will be implemented to efficiently quantify CO₂ emissions. Based on the CO₂ quantification baseline, emission reduction opportunities such as an industrialized construction process will be introduced that allows homebuilders to reduce the environmental and economical impact of home construction while enabling them to produce higher quality, more energy efficient homes in a safer and shorter period of time.

• Korean Institute of Interior Design Journal
• /
• v.14 no.5 s.52
• /
• pp.167-176
• /
• 2005

Since Korea has already become the 'aging society' and is expected to become the 'aged society' by 2019, development of the facilities and dedicated housing for the senior citizens have become the key issues. The growing population of the senior citizens, changed in the social structure, family type, and the way of living brings a moment to consider the various aspects to support the senior citizens. Now the situation in Korea requires development of congregate housing as a type of residential units for elder who can live at home with some help. Therefore, the purpose of this research was to analyze preference tendency on the interior finishing materials and colors of the congregate housing for the senior citizens who are healthy enough not needing the nursing home. For this research, the preference of 500 Korean pre-senior citizens on the interior finishing materials and colors of congregate housing for the seniors was investigated. The collected data was processed using SPSS 10.0 for Windows regarding frequency, percentage, average, Chi-squared test with cross tabulation. The results are as follows: First, about $60\%$ of the respondents preferred Korean traditional interior image for individual units, and modern interior image for common areas. Second, the respondents preferred wood flooring and wallpaper interior finishing. Third, the respondents Preferred Y, YR color for individual units, and N color for common areas and very pale tone for all spaces. Fourth, the respondents preferred luxury finishing to living room in the all spaces.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.7
• /
• pp.43-52
• /
• 2018

In this study, annual site and primary energy use intensities (EUIs) and CO2 emission intensities (CEIs) per area by end use were estimated based on the measurement data from June 2016 to May 2017 of 50 sample apartment units in Seoul. In addition, estimated site EUIs by end use were compared to the U.S. Residential Energy Consumption Survey (RECS) 2009 data. Site EUIs by end use were found to be in the order of heating > electric appliance > domestic hot water > cooking > lighting > cooling > air movement. In the case of primary EUIs and CEIs by end use, electric appliance was found to be the largest. As results of comparison with the RECS 2009 data, it was found that site EUIs were very similar for heating, domestic hot water and electric appliance, etc., but slightly different for cooling. The number of sample apartment units will continue to increase until 2020 (total number of samples 200) and intensities data by end use will be continuously updated through continuous collection of measurement data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1D
• /
• pp.73-81
• /
• 2008

Hereafter, the domestic housing industry has to give consequence to the redevelopment and rebuilding of existing housings rather than the supply by developing a new building site, and now those tendencies are rapidly spreading out. Also, because apartment buildings occupies 50% over of the existing housing, its maintenance, repair, remodeling and reconstruction got to be necessary area for the slumming prevention of a residential area and the disaster prevention occurred by durability lowering of the building. Accordingly, C&D waste is rising largely by reason of demolition works in city is increasing. The right management of C&D waste is being one of very important things, but little research has been conducted to estimate correctly C&D waste. In this study is to suggest standard units of C&D waste which can estimate demolition quantity of apartment. This units can estimate easily and correctly C&D waste in demolition works, also can possible use very important material to carry out policy of national waste management.

• Journal of Korean Society of Rural Planning
• /
• v.29 no.4
• /
• pp.117-125
• /
• 2023

This study aimed to analyze the recent status and changes in impervious surface areas and their ratios across regions in Gyeongsangnam-do, providing fundamental data for regional development and impervious surface management. Based on the 'Guidelines for Calculating Water Cycle Management Indicators for Nonpoint Pollution Source Control(Ministry of Environment)', we processed the land characteristics survey map(shapefile) from 2018 and 2022 to analyze impervious surface area and their rates by administrative boundaries. The impervious surface area in Gyeongsangnam-do increased from 75,652 ha in 2018 to 81,055 ha in 2022, with the rate rising by 0.51% from 7.18% to 7.69%. The average of impervious surface area across 545 eupmyeon units expanded by approximately 9 ha, from 139.8 ha in 2018 to 148.8 ha in 2022, with the rate increasing by 0.71%. Concurrently, the whole population declined by 2.8% while the number of households surged by 6.4%, correlating with the growth in impervious areas. Despite population decreases, factors such as population migration, increased household fragmentation, new residential developments, and industrial facility expansions have consistently contributed to the rise in impervious surface area. Notably, even in areas with high impervious surface area rate, significant disparities existed between urbanized areas and predominantly rural regions. Furthermore, about 333 units(61% of the whole eupmyeons), showed negligible changes in their impervious surface area rate, with an increase of less than 0.5%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.262-269
• /
• 2019

This study was conducted to pave the way for the development and operation of education and training programs to nurture skilled North Korean construction workers. Such programs would help to meet the expanded demand for setting up infrastructure, which is the backbone of the two Koreas' economic cooperation and mutual development. To achieve this initiative, the targets and scopes of education and training were determined by classifying business types for education and training purposes by construction sector. Furthermore, each education and training course and their allocated time frames were analyzed. Issues related to inter-Korean economic cooperation in the border area were also analyzed to determine regional characteristics. Education and training programs were thus classified into three types of infrastructure units: society, industry, and life infrastructure units. Social infrastructure units are the common demand of the whole border area, including construction of roads, railways, and harbors, as well as inspection and maintenance. Industrial infrastructure units are programs for industrial facilities centering on the designated special economic zone in the western part of the border area. Life infrastructure units are programs for infrastructure facilities such as large, complex facilities and residential facilities for the eastern tourist belt side.

• International Journal of High-Rise Buildings
• /
• v.4 no.4
• /
• pp.311-318
• /
• 2015

The ASHRAE Design Guide for Tall, Supertall and Megatall Building Systems was produced in collaboration with the CTBUH. The design guide outlines various tall building mechanical systems that are presently being designed or are planned for the future. Tall commercial buildings in particular present a series of design problems that set them apart from other functions. The Design Guide will be of interest to owners, architects, structural engineers, mechanical engineers, electrical engineers and other specialized engineers and consultants. This design guide addresses design issues for tall commercial buildings, which are very often mixed-use, and commonly consist of low level retail, office floors, residential units, and hotel uses.

• Journal of the Korean housing association
• /
• v.14 no.3
• /
• pp.67-76
• /
• 2003

This study was to investigate the needs for the community in the elderly institution and the related factors. The raw data, collected in 2000, from the Study for the Silver Industry in Ulsan were used for the analysis. The sample consisted of 292 elderly aged 65 and over living in Ulsan, and the purpose was accomplished using frequencies, percentages, and chi-squared test with cross-tabulations. The results indicated that the elderly tends to have negative responses to the discriminations by health conditions and sharing the public spaces with neighbors. However it was more likely that the elderly wants to have separate public spaces and facilities by gender. They prefer private residential units rather than public spaces for the meals, baths, and receptions. It was also found that gender, with or without spouse, education level, and economic condition of the elderly have significant effects on the needs for the community in the elderly housing.