• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1183-1186
• /
• 2005

A new reset method for high contrast ratio and reduction of the reset time is presented. In this new reset method, except the first subfield, a new reset pulse with only ramp-up period is adopted. In this reset method, from the third subfield, the background luminance generated during the reset period is theoretically zero until the first subfield of the following frame. Employing the new reset method, the dark room contrast ratio improved to 3084.7:1 from 189.1:1 of the conventional reset method. The new reset method reduced the required time for reset per subfield to 160us except the first subfield.

• 반도체디스플레이기술학회지
• /
• 제5권2호
• /
• pp.11-14
• /
• 2006

A new reset waveform with negative ramp pulse is proposed. Conventional reset waveform applied to the commercial PDP uses a positive ramp pulse. The reset waveforms, especially focused on ramp area, were examined with 2 dimensional fluid code. The proposed negative reset waveform showed much lower ignition voltage ($\sim$70V) as compared with the conventional reset waveform. When the negative ramp pulse was applied, all of the positive-charged ions are collected on the scan electrode. It is found that the ignition voltage of reset discharge due to the negative ramp pulse became lower than that of positive ramp discharge.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 춘계학술대회
• /
• pp.139-144
• /
• 2006

일반적인 PDP 에 적용된 ADS 방식에서 Reset 파형은 ON/OFF Cell 을 초기화 시켜주고 Wall charge를 쌓아줌으로써 낮은 Address 전압으로도 구동을 가능하게 해준다. 기존의 Reset 파형은 Positive ramp pulse를 이용하여 구현하고 있으나 본 논문은 Negative ramp pulse가 적용된 새로운 Reset 파형을 제안하고자 한다. 2-Dimensional fluid simulation code를 이용하여 Ramp부분에 초점을 맞춰 Reset파형을 분석했으며 제안된 Negative ramp reset 파형은 기존의 Positive ramp reset 파형보다 70V가 낮은 전압에서 방전이 발생되는 것을 확인했다. Negative ramp pulse를 적용됐을 경우, Positive ion들이 모두 Negative ramp pulse가 인가된 Scan전극으로 모이는 현상 때문에 기존 Reset파형에 의한 방전일 때보다 낮은 전압에서의 초기방전을 발생시키므로 Reset에 소요되는 시간과 전압을 감소시킬 수 있다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권4호
• /
• pp.524-533
• /
• 2017

This paper presents a novel reset scheme for mm-scale sensing systems with stringent volume and area constraints. In such systems, multi-layer structure is required to maximize the silicon area per volume and minimize the system size. The multi-layer structure requires wirebonding connections for power delivery and communication among layers, but the area overhead for wirebonding pads can be significant. The proposed reset scheme exploits already existing power wires and thus does not require additional wires for system-wide reset operation. To implement the proposed reset scheme, a power management unit is designed to impose reset condition, and a reset detector is designed to interpret the reset condition indicated by the power wires. The reset detector uses a coupling capacitor for the initial power-up and a feedback path to hold the developed supply voltage. The prototype reset detector is fabricated in a $180-{\mu}m$ CMOS process, and the measurement results with the prototype mm-scale system confirmed robust reset operation over a wide range of temperatures and voltages.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.241-245
• /
• 2006

Reset is necessary for effective addressing in AC PDPs, but reset takes considerable time and produces background luminance. A reset method that takes less time but is effective for addressing is presented. Furthermore, this reset method produces almost negligible background luminance.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.605-607
• /
• 2012

본 논문에서는 새로운 TCP Reset 공격방법에 대해 제시한다. TCP의 3-way Handshake 과정에서 Receiver가 listen 상태일 때, 부정확한 ACK Number를 포함하는 세그먼트를 받게 되면 Sender TCP에게 Reset을 포함한 세그먼트를 전송하여 연결 설정이 이루어 지지 않는다(RFC 792). 본 연구에서 는 TCP 초기 연결 설정 과정인 3-way Handshake에서 Sender를 모니터링 하고 있는 Attacker가 Sender보다 먼저 부정확한 ACK Number를 포함하는 세그먼트를 보내고, 이를 수신한 Receiver가 Sender에게 Reset을 포한한 세그먼트를 보내어 연결 설정이 이루어지지 않는 새로운 TCP Reset 공격 방법을 제시한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.609-612
• /
• 2002

A new reset waveform is proposed for reducing the reset period. A square pulse is applied to the address electrode while reset pulse ramps and before a discharge between the sustain electrodes occurs. The square pulse induces a discharge between the address electrode and the X electrode, and the induced wall charge is opposite to the applied ramp pulse. Thus, the next discharge between the sustain electrodes becomes weaker. The weaker discharge lowers background luminance and improves contrast ratio. Thus, the new reset waveform can reduce ramp up time in the ramp reset waveform The experimental results show that the ramp up time can be reduced by about 90% compared with the conventional ramp reset waveform.

• 전력전자학회논문지
• /
• 제10권6호
• /
• pp.587-591
• /
• 2005

AC PDP의 구동파형은 Reset 구간에서 명암비를 높이고 화질향상을 위해서 전압파형을 서서히 증가시키고 또 감소시키는데, 이 전압파형의 기울기와 크기가 온도와 더불어서 PDP의 화질과 관련이 있다. 그래서 본 논문에서는 Reset 구간에서 Y 전극에 인가하는 램프파형의 setup 및 setdown 구간에서의 기울기와 -Vy전압을 온도에 따라서 가변함으로써, 주위의 온도가 상온에서 저온이나 고온으로 변화하여도 PDP의 화질이 영향을 받지 않고 최상으로 유지하게 하는 온도 적응형 RESET 파형 발생회로를 제안하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권12호
• /
• pp.606-615
• /
• 2004

The discharge characteristics of a ramp reset waveform in the alternating current plasma display panel(ac PDP) were studied using a 2-dimensional numerical simulation. We analyzed the wall charge variation during the reset discharge, address discharge and sustain discharge adopting a ramp reset waveform. Then we investigated the principal parameters for a successful discharge. In this paper, we suggest a new parameter, printing particles' density and its effects on the stability of the ramp discharge. The maximum current flows of the three electrodes during the ramp reset period were decreased with the increase in the priming particles's density which was explained with the wall charge characteristics and the current flow characteristics obtained by a 2-D simulation.

• Journal of Information Display
• /
• 제3권4호
• /
• pp.13-18
• /
• 2002

In general, the background light that is produced during the reset period deteriorates the dark room contrast ratio in AC PDP. In this paper, we propose a modified ramp reset pulse that can reduce the background light to an imperceptible level. In the new reset waveform, the discharges between the scan and sustain electrodes are minimized by applying a positive bias voltage to the sustain electrode and only the weak discharges between the scan and address electrodes are found to occur during the reset period. We also adopted the MgO coated phosphor layer to improve the address voltage margin that was reduced when the bias voltage in the modified ramp reset waveform was applied. As a result, the address voltage margin of 45 V which is the same level of the conventional method was ortained and the dark room contrast ratio was improved up to 7500 : 1.