• 제목/요약/키워드: Reservoir modeling

검색결과 237건 처리시간 0.033초

아시아 몬순지역의 대형댐(소양호)에서의 인순환과 2차원모델의 적용 (Phosphorus Cycle in a Deep Reservoir in Asian Monsoon Are3 (Lake Soyang, Korea) and the Modeling with a 2-D Hydrodynamic Water Quality Model [CE-QUAL-W2])

  • 김윤희;김범철
    • 생태와환경
    • /
    • 제37권2호통권107호
    • /
    • pp.205-212
    • /
    • 2004
  • 아시아 몬순지역에서 대형댐의 인순환(phosphorus cycle)과정의 특징을 파악하기 위하여 소양호를 대상으로 인순환 과정을 조사하였다. 또한, 이를 모의하기 위해 2차원 수질모델인 CE-QUAL-W2를 적용하여 수중생태계의 물질순환과정을 모의하였다. 소양호는 수심이 깊고성층이 강하여 수직적인 변이가 뚜렷한 인의 분포를 보였다. 인의 부하량은 유역면적의 90%를 차지하는 주유입하천인 소양강의 인농도를 측정하여 산정하였다. 소양강의 인농도는 강우시 유량 증가에 따라 크게 증가하는 변동을 보였으므로 인의 부하량은 간헐적으로 발생하는 폭우 유출에 집중되었다. 폭우시 유출수는 수온이 낮아지기 때문에 호수의 중층으로 잠류하여 중층 탁수대를 형성하는 것으로 관측되었다. 여름 우기가 끝난 후 중층에는 두께 20${\sim}$30m의 인함량이 높은 탁수층이 형성되었으며 이탁수층은 댐 중간수심에 만들어진 발전방류구를 통하여 서서히 방류되었다. CE-QUAL-W2 모델은 호우시 탁수의 잠류현상과 인함량이 높은 중층의 형성, 인의 수평수직분포 등의 인순환 과정이 잘 모의 하여,아시아 몬순지역의 댐에서 수질모델로서 육수학적 현상을 잘 모의하는 것으로 평가된다.

Impact of pore fluid heterogeneities on angle-dependent reflectivity in poroelastic layers: A study driven by seismic petrophysics

  • Ahmad, Mubasher;Ahmed, Nisar;Khalid, Perveiz;Badar, Muhammad A.;Akram, Sohail;Hussain, Mureed;Anwar, Muhammad A.;Mahmood, Azhar;Ali, Shahid;Rehman, Anees U.
    • Geomechanics and Engineering
    • /
    • 제17권4호
    • /
    • pp.343-354
    • /
    • 2019
  • The present study demonstrates the application of seismic petrophysics and amplitude versus angle (AVA) forward modeling to identify the reservoir fluids, discriminate their saturation levels and natural gas composition. Two case studies of the Lumshiwal Formation (mainly sandstone) of the Lower Cretaceous age have been studied from the Kohat Sub-basin and the Middle Indus Basin of Pakistan. The conventional angle-dependent reflection amplitudes such as P converted P ($R_{PP}$) and S ($R_{PS}$), S converted S ($R_{SS}$) and P ($R_{SP}$) and newly developed AVA attributes (${\Delta}R_{PP}$, ${\Delta}R_{PS}$, ${\Delta}R_{SS}$ and ${\Delta}R_{SP}$) are analyzed at different gas saturation levels in the reservoir rock. These attributes are generated by taking the differences between the water wet reflection coefficient and the reflection coefficient at unknown gas saturation. Intercept (A) and gradient (B) attributes are also computed and cross-plotted at different gas compositions and gas/water scenarios to define the AVO class of reservoir sands. The numerical simulation reveals that ${\Delta}R_{PP}$, ${\Delta}R_{PS}$, ${\Delta}R_{SS}$ and ${\Delta}R_{SP}$ are good indicators and able to distinguish low and high gas saturation with a high level of confidence as compared to conventional reflection amplitudes such as P-P, P-S, S-S and S-P. In A-B cross-plots, the gas lines move towards the fluid (wet) lines as the proportion of heavier gases increase in the Lumshiwal Sands. Because of the upper contacts with different sedimentary rocks (Shale/Limestone) in both wells, the same reservoir sand exhibits different response similar to AVO classes like class I and class IV. This study will help to analyze gas sands by using amplitude based attributes as direct gas indicators in further gas drilling wells in clastic successions.

취수 수심이 합천호의 수온성층과 방류 수온에 미치는 영향 모델링 (Modeling the Effect of Intake Depth on the Thermal Stratification and Outflow Water Temperature of Hapcheon Reservoir)

  • 정선아;김혜지;이혜숙
    • 환경영향평가
    • /
    • 제32권6호
    • /
    • pp.473-487
    • /
    • 2023
  • 1970~1980년대 준공된 우리나라의 다목적댐 저수지에는 발전방류를 위한 고정식 취수구가 심층에 설치되어 있어 일부 댐 하류에서는 냉수 방류에 의한 농작물 냉해, 안개 일수 증가 등의 문제점이 제기된 바 있다. 본 연구에서는 고정식 취수구를 통해 심층 취수가 이루어지고 있는 합천호를 대상으로 취수 수심이 저수지의 수온 성층 구조와 방류 수온에 미치는 영향을 분석하였다. 3차원 수리수질모형인 AEM3D를 이용하여 합천호의 연직 수온 분포를 재현하고 계절별 수온성층 구조를 분석하였으며, 수문 조건에 따른 수온성층 변화를 비교 분석하기 위하여 풍수해와 갈수해를 대상으로 모델링 하였다. 또한 취수심 변경 시나리오를 적용함으로써 취수 수심이 수온성층 구조에 미치는 영향을 분석하였다. 모의 결과 심층 취수를 표층 취수로 변경할 경우 수온약층의 형성 위치가 풍수해 6.5 m, 갈수해 6.8 m 감소하여 더 얕은 수심에 형성될 것으로 분석되었다. 또한 수체 안정도 지수인 Schmidt Stability Index (SSI)와 Buoyancy frequency (N2)가 증가하여 수온성층 강도가 증가하는 것으로 나타났다. 표층 취수시 연평균 방류수온이 풍수해 3.5℃, 갈수해 5.0℃ 증가하여 하류하천의 영향은 감소하나, 호내의 저수온층 수체적과 수온성층 강도가 증가하므로 추후 수질관리를 위해 취수심을 댐 운영의 주요인자로 고려해야 할 것으로 판단된다.

수리자극에 의한 지열저류층에서의 유도지진과 단층대의 변형에 관한 입자기반 개별요소법 모델링 연구 (Particle Based Discrete Element Modeling of Hydraulic Stimulation of Geothermal Reservoirs, Induced Seismicity and Fault Zone Deformation)

  • 윤정석;아미르 하킴하쉐미;아노 짱;귄터 찜머만
    • 터널과지하공간
    • /
    • 제23권6호
    • /
    • pp.493-505
    • /
    • 2013
  • 본 수치해석논문에서는 절리와 단층대를 포함한 지열저류층에 수리자극을 가할 시 수반되는 유도지진과 단층대의 변형을 개별요소법을 사용하여 모델링하였다. 수채해석기법은 2차원 입자유동코드를 기반으로 하며 수리역학적 상호작용기법과 미소파괴음의 모멘트텐서 역산알고리즘이 결합되었다. 수치해석의 주요결과로는 시공간적으로 변하는 유도지진의 분포와 규모 그리고 단층대의 변형(파괴 및 전단변위)과 주입유체압력의 시공간적 분포와의 상관관계이다. 첫 번째 수치해석으로부터 절리가 분포하는 지열저류층에서의 수리자극에 의한 유도지진의 분포는 주입유체의 점성에 상당한 영향을 받는 것으로 나타났다. 주입유체의 점성이 낮은 경우 (1 cP), 유도지진의 발생범위가 큰 것으로 나타났으며, 주입 후 발생하는 유도지진의 개수와 규모 또한 높게 나타났다. 단층대가 존재하는 지열저류층의 수리자극 모델링의 결과, 주입정의 위치가 단층대와 가까운 경우 작은 주입수 압력분포(<0.1 MPa)로도 단층대의 파괴와 전단변형을 일으킬 수 있는 것으로 나타났다. 본 논문에서 소개한 수치해석기법은 수리자극을 통한 지열저류층 개발 시 유도지진의 분포와 규모를 실제 유체주입작업전에 예측할 수 있게 함으로써 지열에너지개발 분야에서 유용하게 사용될 수 있을 것으로 기대한다.

ASTGTM 전지구 DEM 기반의 수력발전댐 적지분석 사전모델링 (A feasibility modeling of potential dam site for hydroelectricity based on ASTGTM DEM data)

  • 장원진;이용관;김성준
    • 한국수자원학회논문집
    • /
    • 제53권7호
    • /
    • pp.545-555
    • /
    • 2020
  • 본 연구에서는 해외 수력댐 건설 프로젝트의 사전조사 기초자료 제공을 위하여 댐 위치 결정을 위한 사전적지분석 알고리즘을 개발하고, 위성영상 수치표고자료인 ASTER Global Digital Elevation Model (ASTGTM)과 토지피복자료인 Terra/Aqua combined Moderate Resolution Imaging Spectroradiometer (MODIS) MCD12Q1를 사용하였다. 사전적지분석 알고리즘은 DEM의 전처리, 하천망생성, 유역분할과 지형정보를 고려한 적지분석과 댐 건설 시 수몰면적에 따른 보상면적 산정 알고리즘을 포함하고 있으며 Python기반의 오픈소스 GIS로 구현되었다. 적지분석은 사용자가 하천 위의 지점을 선택하면, DEM으로부터 낙차, 도달시간, 내용적곡선과 같은 지형정보와 토지피복자료를 통한 보상면적을 기반으로 지점의 적지여부를 평가한다. 분석알고리즘은 국내 부항, 보현산, 성덕, 영주댐을 대상으로 시범적용 됐으며 해당 지점의 가능 최대낙차는 각각 37, 67, 73, 42 m로 나타났으며 최대저수면적은 1.81, 2.4, 2.8, 8.8 ㎢ 최대저수량은 35.9, 68, 91.3, 168.3×106 ㎥으로 나타났다. 보현산과 성주 댐에서는 타당성을 보였으나, 부항과 영주 댐의 경우 ASTGTM 에러로 인한 잘못된 하천망과 유역경계로 인해 낙차가 제한됨을 보였다, 본 연구의 결과는 향후 해외 수력댐 사업 진출시 사전분석에서 적지의 지형학적 평가에 도움이 될 것으로 기대된다.

PWM 스윗치 모델을 이용한 PV용 Boost Converter Modelling (Boost Converter Modeling of Photovoltaic System Using PWM Switch Model)

  • 김효진;이기옥;최주엽;정영석;유권종;권종덕
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.286-293
    • /
    • 2002
  • Photovoltaic systems normally use a maximum power point tracking (MPPT) technique to continuously deliver the highest possible power to the load when variations in the insolation and temperature occur. A simple method of tracking the maximum power points (MPPs) and forcing the boost converter system to operate close to these Points is presented through deriving small-signal model and transfer function of boost converter. This paper aims at modeling boost converter including equivalent series resistance of input reservoir capacitor by state-space-averaging method and PWM switch model. In the future, properly designed controller for compensation will be constructed in real system for maximum photovoltaic power tracking control.

  • PDF

개수로내의 점변 및 급변 부정류에 대한 유한요소해석 :I.이론 및 수치안정성 해석 (Finite Element A nalysis of Gradually and Rapidly Varied Unsteady Flow in Open Channel:I.Theory and Stability Analysis)

  • 한건연;박재홍;이종태
    • 물과 미래
    • /
    • 제29권6호
    • /
    • pp.167-178
    • /
    • 1996
  • 수문자료 시계열의 모의기법은 수자원 시스템의 설계라든지 저수지의 최적운영, 저수지의 홍수조절 설계등을 목적으로 개발되어 왔다. 추계학적 모형들은 주로 수문자료 시계열의 모의발생을 위해 사용되어 왔으나, 연속지수모형 기법(indexed sequential modeling, ISM)은 단기간의 수문 관측자료를 일정한 규칙에 의해 혼합함으로서 수문자료 시계열을 모의 발생시키기 위해 1980년도 초반이후에 미국서부지역에서 실무해결에 적용되어 왔으며 그 성과에 대한 긍정적인 평가가 보고 되어 왔다. 본 연구에서는 홍천강에 계획되어 왔으며 그 성과에 대한 긍정적인 평가가 보고 되어 왔다. 본 연구에서는 홍천강에 계획되어 있는 홍천댐 지점에서의 연 평균 유입량기록을 바탕으로 하여 연속지수 모형과 1차 자기회귀모형에 의해 장기간의 연 평균 유입량 자료를 모의 발생시켜 한발 특성치들을 각각 구하고 이를 상호 비교, 검토함으로써 연속 지수 모형의 적용성을 검토하고자 하였다.

  • PDF

Hydrodynamic fish modeling for potential-expansion evaluations of exotic species (largemouth bass) on waterway tunnel of Andong-Imha Reservoir

  • Choi, Ji-Woong;An, Kwang-Guk
    • Journal of Ecology and Environment
    • /
    • 제40권2호
    • /
    • pp.125-135
    • /
    • 2016
  • Background: The objectives of this study were to establish a swimming capability model for largemouth bass using the FishXing (version 3) program, and to determine the swimming speed and feasibility of fish passage through a waterway tunnel. This modeling aimed to replicate the waterway tunnel connecting the Andong and Imha Reservoirs in South Korea, where there is a concern that largemouth bass may be able to pass through this structure. As largemouth bass are considered an invasive species, this spread could have repercussions for the local environment. Results: Flow regime of water through the waterway tunnel was calculated via the simulation of waterway tunnel operation, and the capability of largemouth bass to pass through the waterway tunnel was then estimated. The swimming speed and distance of the largemouth bass had a positive linear function with total length and negative linear function with the flow rate of the waterway tunnel. The passing rate of small-size largemouth bass (10-30 cm) was 0%at a flow of $10m^3/s$ due to rapid exhaustion from prolonged upstream swimming through the long (1.952 km) waterway tunnel. Conclusions: The results of FishXing showed that the potential passing rate of large size largemouth bass (>40 cm) through the waterway tunnel was greater than 10%; however, the passage of largemouth bass was not possible because of the mesh size ($3.4{\times}6.0cm$) of the pre-screening structures at the entrance of the waterway tunnel. Overall, this study suggests that the spread of largemouth bass population in the Imha Reservoir through the waterway tunnel is most likely impossible.

제주도 한천유역 지하수 모델개발을 통한 인공함양 평가 (Modeling Artificial Groundwater Recharge in the Hancheon Drainage Area, Jeju island, Korea)

  • 오세형;김용철;구민호
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제16권6호
    • /
    • pp.34-45
    • /
    • 2011
  • For the Hancheon drainage area in Jeju island, a groundwater flow model using Visual MODFLOW was developed to simulate artificial recharge through injection wells installed in the Hancheon reservoir. The model was used to analyze changes of the groundwater level and the water budget due to the artificial recharge. The model assumed that $2{\times}10^6m^3$ of storm water would recharge annually through the injection wells during the rainy season. The transient simulation results showed that the water level rose by 39.6 m at the nearest monitoring well and by 0.26 m at the well located 7 km downstream from the injection wells demonstrating a large extent of the affected area by the artificial recharge. It also shown that, at the time when the recharge ended in the 5th year, the water level increased by 81 m at the artificial reservoir and the radius of influence was about 2.1 km downstream toward the coast. The residence time of recharged groundwater was estimated to be no less than 5 years. The model also illustrated that 15 years of artificial recharge could increase the average linear velocity of groundwater up to 1540 m/yr, which showed 100 m/yr higher than before. Increase of groundwater storage due to artificial recharge was calculated to be $2.4{\times}10^6$ and $4.3{\times}10^6m^3$ at the end of the 5th and 10th years of artificial recharge, respectively. The rate of storage increase was gradually diminished afterwards, and storage increase of $5.0{\times}10^6m^3$ was retained after 15 years of artificial recharge. Conclusively, the artificial recharge system could augment $5.0{\times}10^6m^3$ of additional groundwater resources in the Hancheon area.

댐붕괴 모형과 FLO-2D를 연동한 산대저수지 붕괴 침수 모의 (FLO-2D Simulation of the Flood Inundation Zone in the Case of Failure of the Sandae Reservoir Gyeongju, Gyeongbuk)

  • 고대홍;이길하;김진만;김성욱
    • 지질공학
    • /
    • 제25권4호
    • /
    • pp.449-458
    • /
    • 2015
  • 갑작스런 저수지 붕괴로 인하여 발생하는 자연재해를 관리하는 효율적인 방법은 홍수위험지도를 작성하는 것이다. 댐붕괴로 인한 홍수위험지도 작성에서 물리적인 현상을 재현해내기 위해서는 유출모형이 사용되는 것이 일반적이며, 모형을 이용하여 잠재적 피해대상지역을 사전에 파악하는데 모형의 정확도가 중요하다. 외국에서 만들어진 기존 상용모형을 검증을 거치지 않고 현장에 적용하는 것은 신뢰성에 문제가 있다. 따라서 모형 예측과 실측의 차이를 비교하여 모형의 정확도를 확인할 필요가 있다. 이 연구에서는 댐붕괴 모형을 하도추적모형인 FLO-2D모형에 연동하여 침수지역을 파악하였다. 모형의 매개변수는 모형의 결과에 중대한 영향을 미치므로 먼저 DEM을 구축한 후 토지피복도로 Manning계수를 산정하고 동시에 토양도를 사용하여 침투과정의 매개변수를 산정하였다. 모의 결과는 침수현장에서 설문조사를 통하여 제작한 현장침수지도와 상대 비교하였다. 침수지역의 수위와 범위 등을 비교한 결과 연구에 사용한 붕괴모형이 침수 지역을 적절하게 재현해 내는 것으로 나타났다.