• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1998.10a
• /
• pp.125-135
• /
• 1998

This paper aims to propose a design for simulation systems for container terminal operation evaluation. The systems cover both terminal design simulation for medium and long tern decision making and terminal operations simulation for day to day decision making. And both systems include the container terminal operation components, quay, yard and gate operations. For the flexible and efficient application of the systems, we designed the systems with three modules such as "Define Module"."Simulation Module" and "Animation Module". "Animation Module".ule&".ot;.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.747-751
• /
• 2006

The hydrogenated amorphous silicon thin film transistor (a-Si:H TFT) with copper as source and drain electrode has been fabricated to obtain its transfer characteristics and stressed with positive and negative bias to investigate the instability variation comparing to conventional MoW-Al based TFT device. The results show that there is no copper diffusion into active layer of a-Si:H TFT, even during the thermal process. In addition, a 15-inch XGA a Si:H TFT LCD display utilizing Cu as gate electrodes has been developed.

• ETRI Journal
• /
• v.20 no.2
• /
• pp.241-249
• /
• 1998

The structure and electrical characteristics of metal-ferroelectric-semiconductor FET(MFSFET) for a single transistor memory are presented. The MFSFET was comprised of polysilicon islands as source/drain electrodes and $BaMgF_4$ film as a gate dielectric. The polysilicon source and drain were built-up prior to the formation of the ferroelectric film to suppress a degradation of the film due to high thermal cycles. From the MFS capacitor, the remnant polarization and coercive field were measured to be about $0.6{\mu}C/cm^2$ and 100 kV/cm, respectively. The fabricated MFSFETs also showed good hysteretic I-V curves, while the current levels disperse probably due to film cracking or bad adhesion between the film and the Al electrode.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.8
• /
• pp.496-500
• /
• 2015

This paper was proposed the theoretical research and optimal design 3000V super junction NPT IGBT for using electrical automotive and power conversion. Because super junction IGBT was showed ultra low on resistance, it was structure that can improve the thermal characteristics of conventional NPT IGBT. The electrical characteristics of super junction NPT IGBT were 2.52 V of on state voltage drop, 4.33 V of threshold voltage and 2,846 V breakdown voltage. We did not obtaing 3,000 V breakdown voltage but we will obtain 3,000 V breakdown voltage through improving p pillar layer. If we are carried this research, This device will be used electrical automotive, power conversiton and high speed train.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.6
• /
• pp.452-457
• /
• 2016

Single screw compressors are widely used in the fields of air/gas compression, refrigeration, and chemical fluid transportation systems. A single-screw compressor is composed of a screw rotor and two gate rotors located at both sides. This simple construction enables low rotational speed of the rotor, efficient compression with low noise, low vibration, and long bearing life. Despite these merits, the design method of single-screw compressors is not well known. To accelerate the industrial application of single-screw compressors, a design method using coordinate transformation is presented in this paper, and a tool trajectory is established for machining. Finally, the screw rotor, which is machined using the proposed method, is presented.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.67.2-67.2
• /
• 2012

Graphene is expected to have a significant impact in various fields in the foreseeable future. For example, graphene is considered to be a promising candidate to replace indium tin oxide (ITO) as transparent conductive electrodes in optoelectronics applications. We report the tunability of the wavelength of localized surface plasmon resonance by varying the distance between graphene and Au nanoparticles [1]. It is estimated that every nanometer of change in the distance between graphene and the nanoparticles corresponds to a resonance wavelength shift of ~12 nm. The nanoparticle-graphene separation changes the coupling strength of the electromagnetic field of the excited plasmons in the nanoparticles and the antiparallel image dipoles in graphene. We also show a hysteresis in the conductance and capacitance can serve as a platform for graphene memory devices. We report the hysteresis in capacitance-voltage measurements on top gated bilayer graphene which provide a direct experimental evidence of the existence of charge traps as the cause for the hysteresis [2]. By applying a back gate bias to tune the Fermi level, an opposite sequence of switching with the different charge carriers, holes and electrons, is found [3]. The charging and discharging effect is proposed to explain this ambipolar bistable hysteretic switching.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.22.1-22.1
• /
• 2009

차세대 CMOS 공정에서 유전상수가 높은 게이트 절연막과 함께 게이트 전극이 관심을 끌고 있다. 게이트 전극은 전도도가 높아야 하고 p-MOS, n-MOS에 맞는 일함수를 가져야 하며 열적 특성이 안정해야 한다. 탄탈룸 계열 탄화물이나 질화물은 게이트 전극으로 관심을 끌고 있는 물질이며 이를 원자층 화학증착법으로 박막화 하는 공정이 관심을 끌고 있다. 원자층 화학공정에서는 전구체의 역할이 중요하며 이의 기상반응 메카니즘, 표면 반응 메카니즘을 제대로 이해해야 한다. 본 연구에서는 TBTDET (tert-butylimido tris-diethylamido tantalum) 전구체의 반응 메커니즘을 FTIR(Fourier Transform Infrared)을 이용해 진단하였다. 또한 수소, 암모니아, 메탄을 이용한 열화학 원자층 증착, 플라즈마 원자층 증착 공정을 수행하여 박막을 얻고 이들의 특성을 평가하였다. 각 공정에 따라 반응 메커니즘이 달라지고 박막의 조성이 달라지며 또한 박막의 물성도 달라진다. 특히 박막에 형성되는 TaC, TaN, Ta3N5, Ta2O5 (증착 후 산소의 유입에 의해 형성됨) 등의 조성이 공정에 따라 달라지며 박막의 물성도 달라진다. 반응메카니즘의 연구를 통해 각 공정에서 어떠한 조성의 박막이 얻어지는 지를 규명하였고 박막의 밀도에 따라 산소유입량이 어떻게 달라지는 지를 규명하였다.

• Journal of Navigation and Port Research
• /
• v.31 no.9
• /
• pp.779-784
• /
• 2007

This paper describes a new progressive embedded Internet Protocol(IP) camera available for real-time image transmission. It was applied for ship safety and security on seashore area. The functions of developed embedded system was more effective and excellent than conventional systems. Nowadays, each nation has established harbor security systems to jump up their ports to international port. Recently Incheon port has tried to change man security into center security system used by image security system. The security system of Incheon port has some advantages like effectivity of security system and reduction of manpower and cost, installed by image security system with CCTV cameras at the entrance gate and around the fence. Thus in this paper, we have designed and implemented a Personal Digital Assistants(PDA) based Image Surveillance System for Harbor Security using IP Camera under ubiquitous environment. This system has big advantages which are more effective in an emergency and low cost and small manpower than conventional systems.

• Journal of Korean Port Research
• /
• v.12 no.2
• /
• pp.225-232
• /
• 1998

Todays, the efficient management of container has not been realized in container terminal, because of the excessive quantity of container transported and manual system. For the efficient and automated management of container in terminal, the automated container identifier recognition system in terminal is a significant problem. However, the identifier recognition rate is decreased owing to the difficulty of image preprocessing caused the refraction of container surface, the change of weather and the damaged identifier characters. Therefore, this paper proposes more accurate system for container identifier recognition as suggestion of LSPRD(Line-Scan Proper Region Detection) for stronger preprocessing against external noisy element and MBP(Momentum Back-Propagation) neural network to recognize the identifier.

• Nuclear Engineering and Technology
• /
• v.48 no.2
• /
• pp.470-481
• /
• 2016

Field-programmable gate arrays (FPGAs) have received much attention from the nuclear industry as an alternative platform to programmable logic controllers for digital instrumentation and control. The software aspect of FPGA development consists of several steps of synthesis and refinement, and also requires verification activities, such as simulations that are performed individually at each step. This study proposed an integrated software-testing framework for simulating all artifacts of the FPGA software development simultaneously and evaluating whether all artifacts work correctly using common oracle programs. This method also generates a massive number of meaningful simulation scenarios that reflect reactor shutdown logics. The experiment, which was performed on two FPGA software implementations, showed that it can dramatically save both time and costs.