• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.802-804
• /
• 2002

An analysis of the skeleton type BLDC motor is presented. The single phase skeleton type BLDC motor consists of the stator, rotor with the permanent magnet, and drive circuit with hall sensors that detect the rotor position. The major factors for the initial starting, efficiency, and torque ripples of the skeleton type BLDC motor are the detent groove of the stator and the lead angle of the phase voltage. The performance characteristics according to the angle and height of the detent groove is analyzed. The optimum lead angles of the phase voltage with the torque ripple and motor efficiency is described using the finite element method.

• 대한의용생체공학회:의공학회지
• /
• 제12권4호
• /
• pp.309-314
• /
• 1991

This paper describes the results of study on the measurement method of TRMS (true root mean square value) In electrosurgical unit. We used three type (direct computing type, indirect computing type, thermal converting type) in the measurement of TRMS. Three types of measurement method were compared with respect to power level, frequencey and crest factor in addition to environmental temperature. In three of them, the thermal converting type was the best for th electrosurgical unit analyzer

• 대한조선학회논문집
• /
• 제52권5호
• /
• pp.365-371
• /
• 2015

Hull plate consists of various types of curved plates and there also exists corresponding processing methods. Typically, curved plates can be divided into convex type and saddle type. Large amount of research has been conducted mainly focusing on application of processing method of convex type, saddle type and hybrid type, but research on determination and processing method application of the most difficult S-shaped curved plate that has inflection lines has not been carried out yet. In this paper, as the fundamental research of appropriate processing method application, a calculation method is proposed to calculate inflection lines on curved plates. In order to calculate inflection lines, normal curvature and information of fabricated curved plates should be utilized. We compare the workability of the fabrication for hull plate using inflection line.

• Journal of Ceramic Processing Research
• /
• 제13권spc2호
• /
• pp.336-340
• /
• 2012

Wide band gap p-type hydrogenated amorphous silicon oxide (a-SiO:H) buffer layer has been used at the interface of transparent conductive oxide (TCO) and hydrogenated amorphous silicon (a-Si:H) p-type layer of a p-i-n type a-Si:H solar cell. Introduction of 5 nm thick buffer layer improves in blue response of the cell along with 0.5% enhancement of photovoltaic conversion efficiency (η). The cells with buffer layer show higher open circuit voltage (Voc), fill factor (FF), short circuit current density (Jsc) and improved blue response with respect to the cell without buffer layer.

• 천문학회보
• /
• 제38권2호
• /
• pp.59.2-59.2
• /
• 2013

The luminosity evolution of Type Ia supernova (SN Ia) and dust extinction play major roles in the systematic uncertainties in the SN cosmology. In order to overcome these obstacles, here we propose to use GMT-GMACS to take spectra for early-type host-galaxies of SNe Ia in the redshift range between 0.2 and 1.0. This high-redshift sample will be taken from Dark Energy Survey (DES), which expects more than 200 early-type hosts at this redshift range. They will be compared with nearby early-type hosts, for which we are now obtaining low-resolution spectra. We will select host-galaxies of same population age range for both nearby and high-redshift samples to reduce the possible evolution effect. Since we are dealing with early-type galaxies, our test is also less affected by dust extinction. We expect that our evolution-free and dust-free dark energy test will provide more robust results on the nature of dark energy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.865-867
• /
• 2001

Generally large synchronous rotating machines with 2 poles have more merits than the others with more than 2 poles Superconducting synchronous rotating machines also have the same tendency, but they have different structure from conventional ones because of no magnetic core inside of the rotor. As the result, design approaches of the superconducting field coils are also different, which would be classified into 2 types according to their coil shapes. The first one is race-track type and the other is saddle type Race-track type machines have almost the same structure with conventional salient pole generators which are being used as largely small scale machines with more than 2 poles. On the other hand saddle type machines correspond to conventional cylindrical generators with 2 poles used for large turbine system in power plants. In this paper several types of superconducting field coils are introduced for 2 pole superconducting machine design and then the feasibility of each type is considered. Moreover, based on the consideration. 1MVA superconducting generator(S.G.) with saddle type field coil is designed electromagnetically.

• Toxicological Research
• /
• 제17권3호
• /
• pp.167-171
• /
• 2001

Oral mucous membrane test using Syrian hamsters was performed to evaluate the reliability as a model system for the assessment of the potentially irritating substances intended for the mucous membranes, and to determine the irritating potential of a new emulsion-type formulated toothpaste. After test substances were implanted into the cheek pouches of hamsters with diluents (20 mg/kg) under pento-barbital sodium anesthesia, we made the comparison in irritation between emulsion-type and dispersion-type of triclosan (TCS) formulations in the range of 0.2% to 0.3%. The emulsion-type formulations using non-ionic surfactant showed less mucosal lesion than other commercial toothpastes with 0.3% TCS, or dispersion-type ones. However, no significant difference in irritation was detected between 0.2% and 0.3% TCS. We report that this hamster cheek pouch method could be a reliable approach for the evaluation slight difference in the irritating potentials of cosmetics and hygiene products intended for the lips or other mucous membranes, and this method showed that the new emulsion-type formulation significantly lowered the TCS-induced toxicity, compared with other commercial toothpastes.

• Mycobiology
• /
• 제49권6호
• /
• pp.582-588
• /
• 2021

The interaction of mating pheromone and pheromone receptor from the B mating-type locus is the first step in the activation of the mushroom mating signal transduction pathway. The B mating-type locus of Lentinula edodes is composed of Bα and Bβ subloci, each of which contains genes for mating pheromone and pheromone receptor. Allelic variations in both subloci generate multiple B mating-types through which L. edodes maintains genetic diversity. In addition to the B mating-type locus, our genomic sequence analysis revealed the presence of a novel chromosomal locus 43.3 kb away from the B mating-type locus, containing genes for a pair of mating pheromones (PHBN1 and PHBN2) and a pheromone receptor (RCBN). The new locus (Bα-N) was homologous to the Bα sublocus, but unlike the multiallelic Bα sublocus, it was highly conserved across the wild and cultivated strains. The interactions of RcbN with various mating pheromones from the B and Bα-N mating-type loci were investigated using yeast model that replaced endogenous yeast mating pheromone receptor STE2 with RCBN. The yeast mating signal transduction pathway was only activated in the presence of PHBN1 or PHBN2 in the RcbN producing yeast, indicating that RcbN interacts with self-pheromones (PHBN1 and PHBN2), not with pheromones from the B mating-type locus. The biological function of the Bα-N locus was suggested to control the expression of A mating-type genes, as evidenced by the increased expression of two A-genes HD1 and HD2 upon the treatment of synthetic PHBN1 and PHBN2 peptides to the monokaryotic strain of L. edodes.

• 대한간호학회지
• /
• 제25권4호
• /
• pp.807-824
• /
• 1995

This study was intended to provide women who are experiencing menopause with effective nursing care by exploring the menopause experience. The purpose of the research was to understand the subjective feelings of women about the question of what the menopause experience is. Q-Methodological method was used for that purpose. As the research method, Q-statements were collected preliminary to the study of through in -depth interviews and a literature review. For the study 34 Q-statements were selected. There were 21 women as subjects for the research. The 21 women sorted the 34 statements using the principle of Forced Normal Distribution. The principle of Forced Normal Distribution, which has nine scales to measure the individual opinions, was called Q-Factor Analysis by using PC Quanl Program to supply the material. As a result, there were four categories(self-com-passion type, self-regulation type, self-perception type, self-abandonment type) of special opinion about the menopause experience in these women. The first type was called Self-compassion This type' was associated with varying degrees of emotonal instability(psychological withdrawal). And type in menopause signifies loss of a socially valued status and may result in depressive symptoms. This type expresses the menopause experience as associated with negative reaction. The second type is called Self-regulation. This type overcomes the menopause experience more actively than the other types and do not express the menopause experience as one of suffering. This type make efforts by themselves to regulate the mono-pause experience. The third type is called Self-perception. This type perceives the experience of menopause which as typical menopausal syndrome (hot flashes and decreased vaginal lubrication, decreased estrogen producing atrophic changes of the labia and vaginal mucosa, making intercourse uncomfortable). The fourth type is called Self- abandonment. This type denies the experience of menopause. The meaning of menopausal experience is significantly related with a life accident or life load. Also, This type experiences pain in the musculoskeletal system. As a result, The meaning of the menopausal experience is affected by perceived subjective experience of the nurses, the need to understand each persons meaning of the menopause experience and to develop appropriate nursing interventions based on the typology of menopause experience. Finally. The result of the study will provide basic data for nursing intervention the menopausal women.

• 패션비즈니스
• /
• 제5권5호
• /
• pp.7-15
• /
• 2001

As a means of achieving fashion technology and scientification, this research on the standardization proposals of body type research methods has the following conclusions: 1. As human body displays different characteristics according to races, regions, sexes, and ages, clothing products (unlike other industrial goods) cannot be subject to global standardization. As a result, clothing size standardization can be desirably regionalized, for example, as Asian, European countries, etc. 2. In order to share human-body-concerned information among nations, programs for raw data exchange need to be urgently developed. 3. Top priority is databasing all raw data at home and abroad. 4. So that the findings of body type research can be practically applied to the concerned industry, industry-academy cooperation and information exchange are a must. While researchers have to heighten the precision of their studies, industrial partners ought to focus on the invaluable importance of academic research. 5. The scientific body type analysis, the basis of fashion technology, as well as the development of its application technology and software are ultimately and urgently required.