• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1244-1245
• /
• 2008

Recently, piezoelectric transformer is applied to wide fields. Multi layer piezoelectric transformer has the advantage of high step up ratio, electromechanical coupling coefficient(Kp) and mechanical quality factor(Qm), but is indicated of peeling-phenomenon of electrode, rising sintering temperature made price of costly electrode. So in this study, it discuss on method for fabrication of rosen type piezoelectric transformers. For the fabrication as rosen type piezoelectric transformers, synthesized the powder using 0.01Pb$(ni_{1/3}Nb_{2/3})O_3$ - 0.08Pb$(Mn_{1/3}Nb_{2/3})O_3$ - 0.91Pb$(Zr_{0506}Ti_{0496})O_3$ (abbreviated as PNN-PMN-PZT) ceramics. The density, microstructure, dielectric and piezoelectric properties as a function of sintering temperature were investigated. The results indicated that the optimized properties of ceramics were obtained at sintering temperature of 1200$^{\circ}C$, showed the value of $d_{33}$=273pC/N, $K_p$=0.60 $Q_m$=1585, ${\varepsilon}_r$=1454, density=7.917$g/cm^3$ and $tan{\delta}$=0.0064.

• Journal of the Korean Society of Tobacco Science
• /
• v.29 no.2
• /
• pp.66-73
• /
• 2007

This study was carried out to investigate the changes of curing condition on microclimate of temperature, relative humidity during curing process of burley tobacco leaves. The developed facility, ridge opening type was designed to open the central top roof. The air-cured variety, (N. tabacum cv KB111) was normally grown at the Eumseong tobacco experimental station in 2007. Mean daily temperature of $3^{\circ}C$ in ridge opening type curing facility was lower than that of conventional, whereas mean daily relative humidity of 12.6 % RH was lower in conventional curing facility for the entire stage of curing. The frequency distribution of optimal air temperature at daytime was higher 37.5 % in ridge opening type curing facility than that of conventional, while that of optimal relative humidity was lower 8.2 %. In the ridge opening type curing facility, the excessive drying leaves were low, however the price per kilogram was high. These results suggest that the new developed curing facility may be applied to improved microclimate inside the curing facility for curing burley.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1273-1278
• /
• 2008

A sea water source cascade heat pump was designed and tested in this study. The system was designed to perform a single stage operation in summer, as well as a cascade operation in winter to ensure the high temperature lift. A steady-state simulation model was developed to analyze and optimize its performance. The simulation results show that the R717 exhibits best performance among combinations considered in this study. A R410A also exhibits the highest performance among HFCs with the smallest compressor displacement. A 15-RT R410A-R134a pilot system was installed in the 5-story commercial building at Samcheok City by the East Sea. A scroll type R410A compressor, a reciprocating type R134a compressor, plate type condenser/ evaporator/ cascade heat exchanger and two electronic expansion valves were used to build a pilot. A titanium plate type heat exchanger is also used for the heat exchanging with a sea water. The heat source/sink water is supplied from the well below the seashore in the depth of 5 m. In the initial test of the system, supply water temperature was rising up to $67^{\circ}C$ using a sea water heat source of $9^{\circ}C$, while an ambient temperature was $4.5^{\circ}C$.

• Journal of Electrochemical Science and Technology
• /
• v.1 no.1
• /
• pp.39-44
• /
• 2010

1.5 V and 3.0 V-class film-type primary batteries were designed for radio frequency identification (RFID) tag. Efficient fabrication processes such as screen-printings of conducting layer ($25{\mu}m$), active material layer ($40{\mu}m$ for anode and $80{\mu}m$ for cathode), and electrolyte/separator/electrolyte layer ($100{\mu}m$), were adopted to give better performances of the 1.5 V-class film-type Leclanch$\acute{e}$ primary battery for battery-assisted passive (BAP) RFID tag. Lithium (Li) metal is used as an anode material in a 3.0 V-class film-type $MnO_2||$Li primary battery to increase the operating voltage and discharge capacity for application to active sensor tags of a radio frequency identification system. The fabricated 3.0 V-class film-type Li primary battery passes several safety tests and achieves a discharge capacity of more than 9 mAh $cm^{-2}$.

• Journal of Family Resource Management and Policy Review
• /
• v.4 no.2
• /
• pp.45-56
• /
• 2000

The purpose of this research was to categorize the type of family financial well-being based on objective and subjective dimension. And this study was intended to explore the relations not only those types and the demographic characteristics but also those types and family subsystem; personal subsystem and managerial subsystem. The results of this study were as follows: 1. The type of family financial well-being were categorized as ‘Adequated type’, ‘Dissatisfying type’, ‘Satisfying type’, and ‘Unadequated type’. 2. The objective variables effect the family financial well-being rather then subjective variables. 3. The family cohesion, adjustment and communication pattern and intentional managing efforts increase the family financial well-being.

• Nonlinear Functional Analysis and Applications
• /
• v.28 no.3
• /
• pp.719-729
• /
• 2023

In this article, we present a new notion called "extended metric spaces of type (φ, ρ)" as a generalization of extended b-metric spaces. Also, we establish a fixed point result of a Reich-type contraction on an extended metric space of type (φ, ρ). We also provide several examples to demonstrate the significance of the established results.

• The Korean Journal of Mycology
• /
• v.34 no.2
• /
• pp.88-91
• /
• 2006

Attempts were made to investigate the conditions of mycelia of one low-temperature type strain and one high-temperature type strain of shiitake showing poor fruit-body formation in bed-log, and to survey harmful microorganisms formed on the log surface in Gapyung County, Korea. When tested the growing ability of mycelia, the low-temperature type strain showed ca. 1.1% decrease compared with preserved original strain. And, the high-temperature type one showed ca. 8.0% decrease. The growth of isolated mycelia was tested in sawdust medium. The high-temperature type strain showed ca. 10.8% decrease compared with original strain, and the low-temperature type one showed ca. 25.1% decrease. Weight reduction rate was investigated. The high-temperature strain showed ca. 20.1% decrease and the low-temperature one ca. 19.0%. When compared with non-treatment, original high-temperature type strain showed 107.0% decrease, the isolated high-temperature type strain 49.5%, original low-temperature type one 85.4%, isolated low-temperature type one 50.0%. As the results of confrontation culture, the high-temperature type strain and the low-temperature type one were same as the original ones, respectively. And, in the bed-logs, Hypoxylon truncatum, Coriolus versicolor, Inonotus xeranticus, Daedaleopsis tricolor, Graphostroma platystoma, two species of Myxomycetes, Trichoderma sp. Hypoxylon fragiforme, H. howeianum, and Nitschkia confertula were observed as harmful microorganisms, and the bed-logs were not in good condition.

• Journal of electromagnetic engineering and science
• /
• v.5 no.4
• /
• pp.172-175
• /
• 2005

Sometimes, it is more convenient to use paint-type and spray-type EM wave absorbers than bulk-type or sheet-type. Thus, in this paper, we prepared paint-type and spry-type EM wave absorbers. The proportion of ferrites to paints, particle size of magnetic material, and kinds of paint should be considered to prepare a superior paint-type EM wave absorber. There is no big gap between spray-type and paint-type in EM wave absorption of EM wave absorbers prepared with same composition.

• Atmosphere
• /
• v.16 no.1
• /
• pp.33-48
• /
• 2006

A classification of snowfall type based on development mechanism is proposed using previous snowfall studies, operational experiences, etc. Five types are proposed: snowfall caused by 1) airmass transformation (AT type), 2) terrain effects in a situation of expanding Siberian High (TE type), 3) precipitation systems associated with extratropical cyclones (EC type), 4) indirect effects of extratropical cyclones passing over the sea to the south of the Korean peninsula (ECS type), and 5) combined effects of TE and ECS types (COM type). Snowfall events during 1981-2001 are classified according to the 5 types mentioned above. For this, 118 events, with at least one station with daily snowfall depth greater than 20 cm, are selected. For the classification, synoptic weather charts, satellite images, and precipitation data are used. For TE and COM types, local sea-level pressure chart is also used to confirm the presence of condition for TE type (this is done for events in 1990 and thereafter). The classification shows that 109 out of 118 events can be classified as one of the 5 types. In the remaining 8 events, heavy snowfall occurred only in Ullung Island. Its occurrence may be due to one or more of the following mechanism: airmass transformation, mesoscale cyclones and/or mesoscale convergence over the East Sea, etc. Each type shows different characteristics in location of snowfall and composition of precipitation (i.e., dry snow, rain, and mixed precipitation). The AT-type snowfall occurs mostly in the west coast, Jeju and Ullung Islands whereas the TE-type snowfall occurs in the East coast especially over the Young Dong area. The ECS-type snowfall occurs mostly over the southern part of the peninsula and some east cost area (sometimes, whole south Korea depending on the location of cyclones). The EC- and COM-type snowfalls occur in wider area, often whole south Korea. Precipitation composition also varies with the type. The AT-type has a snow ratio (SR) higher than the mean value. The TE- and EC-type have SR similar to the mean. The ECS- and COM-type have SR values smaller than the mean. Generally the SR values at high latitude and mountainous areas are higher than those at the other areas. The SR value informs the characteristics of the precipitation composition. An SR value larger than 10 means that all precipitation is composed of snow whereas a zero SR value means that all precipitation is composed of rain.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.11
• /
• pp.55-66
• /
• 2018

Purpose - Present research aimed at identifying the effects of ambient pride type on judgement difference between existing preference and final preference formed after being exposed to the preference inconsistent information from others representing a conflict between consumer's own perspective and the others' perspective. And this study also explored the roles of empathic concerns and motive type in the ambient pride type's effects on the judgement difference. Research design, data, and methodology - 2(information type: consistent versus inconsistent) × 2(pride type: hubristic versus authentic) between-subjects design was employed. Data for empirical analysis were from 252 undergraduate students who participated in questionnaire survey. To verify hypotheses, Anova and regression analysis were used. Results - First, there was the judgement difference among the experimental groups. The difference was greater at the authentic pride group than at the hubristic pride group. And the difference was greater at the inconsistent information group than at the consistent information group. The interaction effect of pride type and information type was significant. Second, when consumers who had made their preference were exposed to the inconsistent information from other, those of the hubristic pride group showed more defense motive and less empathic concerns than those of the authentic pride group. And there were the mediation roles of the empathic concerns and the interaction roles of the motive type in the effects of pride type on the judgement difference. Third, the self validity did not affect the difference even that become increased by defense motive rather than accuracy motive. Conclusions - This research could advance the information processing theory related to pride type by exploring the effects of the pride type on judgement difference between existing preference and final preference formed by the inconsistent information from others, and by identifying the mediation roles of the empathic concerns and the interaction roles of the motive type in the effects of the pride type. In view of the results from current study, marketers should make efforts of inducing defense motive and developing and communicating the consistent information to persuade consumers under hubristic pride who have the belief that attributes of their brand are better than those of the competitors' brand, and they also should conduct marketing acts by using the inconsistent information to persuade consumers under authentic pride who have the belief that attributes of the competitors' brand are better than those of their brand.