• 제목/요약/키워드: Research development program

검색결과 5,508건 처리시간 0.044초

HMR(Home Meal Replacement) 선택속성이 지각된 효용적 가치, 재구매 의도에 미치는 영향에 관한 연구: 대형 할인마트와 백화점 구매고객을 대상으로 (A Study on the Influence of the Selective Attributes of Home Meal Replacement on Perceived Utilitarian Value and Repurchase Intention: Focus on Consumers of Large Discount and Department Stores)

  • 서경화;최원식;이수범
    • 동아시아식생활학회지
    • /
    • 제21권6호
    • /
    • pp.934-947
    • /
    • 2011
  • 본 연구는 HMR의 선택 속성과 지각된 효용적 가치, 재구매 의도와의 인과관계를 규명하고, 지각된 효용적 가치가 HMR 선택속성과 재구매 의도에와의 관계에서 매개 역할을 검증함으로써 다른 선행연구들과 차별화 하고자 하였다. 이에 따른 연구결과는 다음과 같다. 첫째, 가설 1에 대한 HMR 선택 속성(음식의 품질, 편의성, 포장, 직원 서비스)은 지각된 효용적 가치와 정(+)의 영향관계가 있는 것으로 나타났다. 우선 음식의 품질 요인은 지각된 효용적 가치와 정(+)의 영향 관계가 있는 것으로 나타났으며(t=2.874, p<0.01), 가설 1-1은 채택되었는데, 이는 HMR의 음식이 맛이 좋으며 신선한 재료를 사용하여 신뢰성을 확보하는 것이 소비자의 지각된 효용적 가치를 높일 수 있는 원인임을 재 입증한 것으로 보인다. 또한 HMR의 편의성에 대한 요인은 지각된 효용적 가치와 정(+)의 영향 관계가 있는 것으로 나타나(t=3.710, p<0.001) 가설 1-2도 채택되었으며, HMR의 최고 강점 중 하나인 편의성은 지각된 효용적 가치에도 영향을 주는 것으로 밝혀져 향후 HMR 시장은 바쁜 현대인들로부터 지속적인 관심을 받을 것으로 보여 진다. 그리고 HMR의 포장 요인은 지각된 효용적 가치와 정(+)의 영향관계가 있는 것으로 나타나(t=3.707, p<0.001) 가설 1-3도 채택되었으며, HMR 포장 용기가 위생적이고 보관 및 저장이 용이하며 포장 용기의 활용도를 높일 수 있는 디자인 개발이 무엇보다 필요함을 나타내었다. 마지막으로 HMR을 판매하는 직원 서비스는 지각된 효용적 가치에 정(+)의 영향 관계가 있는 것으로 나타나(t=2.859, p<0.01) 가설 1-4도 채택되었다. 따라서 고객들의 HMR에 대한 지각된 효용적 가치는 음식의 품질, 편의성, 포장, 직원 서비스 등에 따라 형성될 수 있는 것으로 나타나, 음식의 내 외적 품질뿐만 아니라 직원의 무형적 서비스가 소비자들의 지속적인 구매 행동으로 이루어질 수 있는 핵심요인으로 밝혀졌다. 이는 Hong & Na(2007)의 연구에서 인터넷 의류상품의 제품속성은 모두 실용적 가치를 높일 수 있는 요인으로 밝힌 것과 유사한 결과를 얻은 것으로, 경영자는 HMR 제품의 내 외부 속성 및 서비스에 대해 지속적인 관리가 필요할 것으로 보인다. 둘째, 가설 2에 대한 소비자의 지각된 효용적 가치는 재구매 의도에 정(+)의 영향 관계가 있는 것으로 나타나(t=5.933, p<0.001), 소비자가 지각하는 실용적 가치는 소비자 만족에 중요한 요인임이 밝혀졌다. 이러한 결과는 Choi & Park(2009)가 소비자들은 제공받은 혜택과 지불 비용을 동시에 평가하여 서비스 제공자에 대한 가치와 현재 거래관계에 대한 가치를 결정하게 되면서 소비자들의 지각된 서비스 가치가 재구매 의도에 영향을 미친다는 연구 결과와 동일하였다. 따라서 HMR의 지각된 효용적 가치는 향후 구매행동으로 이어져 지속적인 성장 발전의 가능성이 있음을 밝힌 것으로써 경영자는 시간, 돈, 노력에 비해 가치 상승을 시킬 수 있도록 상품개발에 보다 집중하고 노력해야 할 것으로 보인다. 셋째, HMR 소비자의 HMR 선택 속성과 재구매 의도와의 인과관계에서 지각된 효용적 가치의 매개 효과를 분석한 결과, 부분적 매개효과를 일으키는 것으로 나타났다. 즉, 완전하지는 않지만 HMR 선택속성은 지각된 효용가치에 의해 상당부분 재구매 의도에 영향을 미치는 것으로, Son BM(2011)가 관광지의 선택속성에 대한 선택가치가 높을수록 긍정적인 충성도로 연결되어 재방문으로 이어져 지각된 가치는 재방문으로의 매개 또는 부분매개효과가 있음을 검증한 결과와 동일하였다. 이러한 결과는 HMR 선택 속성이 재구매 의도에 직접적인 영향력을 미칠 것이라는 관점보다 효용적 가치가 매우 중요한 의미가 있다고 볼 수 있으며, HMR 선택속성이 높이 평가될수록 효용적 가치를 높게 인식하고, 재구매 의도에도 영향을 미친다고 볼 수 있겠다. 마지막으로, 가설 검증을 위한 구조방정식 분석 결과, $x^2$=213.078(df=112), RMR=0.093, GFI=0.902, NFI=0.895, CFI=0.945, RMSEA=0.062으로 나타나 HMR의 선택 속성, 지각된 효용적 가치, 재구매 의도는 유의한 인과관계가 있는 것으로 조사되었다. 결과적으로, 미래의 고객들은 여가를 즐기고 삶의 가치를 향상시키고자 더 많은 시간을 요구하게 될 것이고, 특히 음식을 만드는데 필요한 시간과 노력들에 비해 효율성이 낮다는 인식이 점차 확산되면서, 편리하고 빠르게 조리할 수 있으며, 영양까지 겸비한 HMR 제품에 대해 지속적인 관심을 보일 것이다. 본 연구는 소비자의 외식산업에서 지각된 효용적 가치 연구에서 점차 확대되고 있는 HMR 시장이라는 표본을 대상으로 실증분석 하였으며, 특히 HMR의 전반적인 시장이 아닌 한국음식의 HMR만을 대상으로 집중 연구함으로써 다른 연구들과 차별화를 두고자 하였다. 그 결과, 주목받고 있는 한국음식 HMR 제품에 대한 선택 속성들은 소비자들의 효용적 가치를 높게 인지할수록 재구매를 일으킬 수 있는 원동력이 될 수 있음을 실증적으로 밝힘으로써 향후 지속적인 발전 가능성을 보여준 것이라 하겠다. 최근 외식산업은 트렌드의 변화, 모방 또는 복제가 매우 빠르며, 특히 HMR 시장은 메뉴 개발에 대한 한계, 메뉴 안전성에 따른 불신과 메뉴 품질을 관리하는 것이 어려워 지속적인 경쟁력을 유지하기가 매우 힘들다고 하겠다. 그러나 HMR 제품에 대하여 소비자들은 돈, 시간, 노력에 비하여 충분한 효용적 가치를 가지고 있다고 지각함에 따라, 기업의 경영자는 고객들이 추구하는 HMR 선택 속성이 무엇인지를 파악하고, 이를 빠르게 대처하는 것이 무엇보다 중요하다고 하겠다. 또한 효용적 가치를 통해 경쟁 기업과 차별화 할 수 있는 요인이 음식의 품질, 편의성, 포장, 직원 서비스라는 것을 우선으로 본다면 향후 프리미엄 메뉴 개발에 집중하여 경쟁기업과 차별화 하고, 우수한 영양을 갖춘 제품을 보다 쉽게 조리해서 먹을 수 있도록 지속적인 연구 개발이 필요하겠다. 또한 포장 용기의 유해 물질 검출에 대한 소비자의 불안감 해소와 용기의 편이성을 위한 디자인 개발, 서비스 노하우 축적 등은 경쟁사보다 차별적이고 지속적인 경쟁우의를 차지할 수 있는 핵심요인으로써 기업이 가진 자원을 핵심역량으로 발전시키는데 주력해야 할 것이다. 본 연구는 HMR의 선택속성을 통하여 소비자들은 실용적 가치를 인지함으로써 지속적인 구매가 이루어진다는 관점에서 연구가 되었으나, 몇몇 한계점과 향후 연구방향은 다음과 같다. 우선 서울 경인 지역의 대형할인마트와 백화점의 HMR 고객을 대상으로 전체를 대표하기에는 한계점이 있는 것으로 판단되며, 최근 활성화 되고 있는 인터넷 HMR 시장에 대한 연구가 추가적으로 필요할 것으로 보인다. 또한 HMR 구매에 있어 쾌락적 가치를 포함한 전반적인 가치 평가 연구도 부족한 것으로 보여진다. 따라서 HMR 시장의 지속적인 성장과 발전하기 위해서는 본 연구의 한계점을 보완하고 변화되는 외부 환경 변화와 경쟁기업과 차별화 할 수 있는 다각적인 전략 방안을 추가적으로 검토해 보아야 할 것이다.

데이터마이닝을 활용한 소프트웨어 개발인력의 업무 지속수행의도 결정요인 분석 (A Study of Factors Associated with Software Developers Job Turnover)

  • 전인호;박선웅;박윤주
    • 지능정보연구
    • /
    • 제21권2호
    • /
    • pp.191-204
    • /
    • 2015
  • 국내 소프트웨어(SW) 개발인력의 미충원율은 매우 높으며, 특히 2년 이상의 현장경력이 있는 고급 개발자의 부족문제는 심각하다. 최근 정부도 이를 인식하고, 정책적으로 SW개발 신규인력 양성에 힘을 기울이고 있다. 그러나, 이러한 노력은 초급개발자의 수급문제를 해결하는데 효과적일 수 있지만, 업계에서 요구하는 고급 개발자의 부족현상을 해결하는 근본적인 대책으로 인식되지는 못하고 있다. SW 전문개발자를 양성하기 위해서는 초급개발자들이 지속적으로 직무를 수행하여 풍부한 업무경험을 갖춘 고급 개발자로 성장해야 하기 때문이다. 이에, 본 연구는 국내 SW업체에서 근무하고 있는 개발관련 인력들의 업무 지속수행 의도를 조사하고, 이에 영향을 주는 주요요인들을 분석하였다. 이를 위해, 2014년 9월부터 10월까지 국내 SW업체에 근무하고 있는 현직 개발자 총 130명을 대상으로 설문조사를 수행하였으며, 이를 기반으로 SW개발업무 지속수행의도 및 이에 영향을 주는 요인들을 개발자의 특성, 직무환경, 그리고 SW개발자에 대한 사회적 인식 및 산업전망 등의 측면에서 분석하였다. 분석에는 데이터마이닝 기법들 중에서, 분석과정에서의 설명능력이 있는 회귀분석과 의사결정나무가 사용되었다. 회귀분석 결과, SW개발자가 스스로 인식하는 근무 가능한 연령이 높을수록, 내성적인 성향을 가질수록, 또한 적성에 맞아서 직무를 선택한 경우, 지속적 직무 수행 의도가 높은 것으로 나타났다. 이와 더불어, 선형회귀분석에서는 유의하지 않았으나, 규칙기반의 의사결정나무 분석에서 파악된 추가적 요인으로, 새로운 기술에 대한 학습능력 및 SW산업에 대한 전망이 직무 지속수행의도에 영향을 미치는 것으로 나타났다. 이러한 연구결과는 기업의 인적자원관리 및 고급 SW인력 양성정책에 활용될 수 있을 것으로 생각되며, 궁극적으로 SW개발인력의 직무 지속성을 증진시키는 데 기여할 수 있을 것으로 기대된다.

북태평양 오징어유자망어장의 수평분포에 관한 연구 (Study on the Horizontal Distribution of Squid Gill-Net Fishing Ground in the North Pacific Ocean)

  • 이성희;이병기
    • 수산해양기술연구
    • /
    • 제26권3호
    • /
    • pp.221-229
    • /
    • 1990
  • 북태평양 오징어 유자망어장의 표면수온과 어획량의 변화에 의한 어장의 수평분포를 최근 4개년간(1986~1989)의 주어기(5~10월)에 한국 어업기술훈련소, 국립수산진흥원, 일본 북해도대학, 대림수산(주), 오양수산(주) 등이 작성한 해양관측자료에서 발췌한 표면수온자료와 한국 어업기술훈련소 실습선과 이 어업에 종사한 어선 5척에서 조사한 어획량의 자료를 위도 $1^{\circ},$ 경도 $2^{\circ}$ 간격으로 구획한 해구에 대하여 전질처리한 평균표면수온과 단위노력당어획량을 월별로 분석하면 다음과 같다. 1. 어장형성범위는 5월에는 $35^{\circ}~40^{\circ}N,$ $178^{\circ}~166^{\circ}W$ , 6월에는 $36^{\circ}~41^{\circ}N,$ $178^{\circ}E~166^{\circ}W,$ 7월에는 $38^{\circ}~44^{\circ}N,$ $170^{\circ}E~170^{\circ}W,$ 8월에는 $39^{\circ}~44^{\circ}N,$ $144^{\circ}~180^{\circ}E,$ 9월에는 $39^{\circ}~44^{\circ}N,$ $144^{\circ}~170^{\circ}E,$ 10월에는 $40^{\circ}~44^{\circ}N,$ $144^{\circ}~154^{\circ}E였다.$ 2. 어장의 분산은 5, 6, 10월에는 경도방향과 위도방향의 해구수가 거의 같았고, 7, 8, 9월에는 경도방향의 해구수가 많았으며, 특히 8월은 1년중 경도방향의 분산이 가장 컸고, 어장중심은 5월에는 3888해구, 6월에는 3884해구, 7월에는 4078해구, 8월에는 4154해구, 9월에는 4146해구, 10월에는 4044해구였다. 3. 어획수온과 어획적수온은 5월에는 $14.0~18.5^{\circ}C,$ $15.0~16.0^{\circ}C,$ 6월에는 $13.5~18.5^{\circ}C,$ $14.5~16.0^{\circ}C,$ 7월에는 $14.0~20.0^{\circ}C,$ $14.5^{\circ}C,$ $19.0^{\circ}C,$ 8월에는 $16.0~21.5^{\circ}C,$ $18.0~20.0^{\circ}C,$ 9월에는 $14.5~22.0^{\circ}C,$ $17.0~18.5^{\circ}C,$ 10월 $14.0~18.0^{\circ}C,$ $16.0~17.0^{\circ}C였다.$ 4. 평균CPUE는 5월에는 3.2kg/sheet, 6월에는 4.5kg/sheet, 7월에는 4.3kg/sheet, 8월에는 5.1kg/sheet, 9월에는 6.4kg/sheet, 10월에는 5.8kg/sheet였다. 5. 한국정부의 1990년 북태평양 오징어 어업감시계획과 실제의 어장형성범위를 비교하면 5월에는 어장이 형성된 21개 해구 가운데 12개, 6월에는 24개 가운데 7개, 7월에는 25개 가운데 4개 해구에서 조업이 규제되고, 8월 이후의 어장에서는 어업규제수역에 해당되는 해구가 없는 것으로 나타났다.

  • PDF

스마트 의류의 혁신속성과 지각된 위험이 제품 태도 및 수용의도에 미치는 영향 (The Effect of Attributes of Innovation and Perceived Risk on Product Attitudes and Intention to Adopt Smart Wear)

  • 고은주;성희원;윤혜림
    • 마케팅과학연구
    • /
    • 제18권2호
    • /
    • pp.89-111
    • /
    • 2008
  • 디지털 기술의 발전으로 일상생활에 접목시킨 스마트 의류 개발에 관한 연구가 활발히 진행되고 있으나, 실질적으로 착용하게 될 소비자의 인식이나 태도에 관한 연구가 이루어지지 않고 있다. 본 연구에서는 스마트의류의 지각된 혁신속성과 위험지각 차원이 제품 태도와 수용의도에 미치는 영향을 알아보고자 대학생을 대상으로 설문지법을 이용하여 조사하였다. 연구의 결과, 스마트의류의 지각된 혁신속성은 상대적 이점, 가시성, 복잡성의 3가지 요인으로, 지각된 위험은 신체/성과적 위험, 사회심리적 위험, 시간손실 위험, 경제적 위험 4가지 요인으로 추출되었다. 혁신특성 중 상대적 이점, 가시성이, 위험지각 중 사회심리적 위험과 경제적 위험이 제품 태도와 구매의도 예측에 주요한 변인으로 나타났다. 한편 사회심리적, 경제적 위험은 상대적이점과 복잡성을 설명하는데, 신체성과적, 사회심리적, 시간손실 위험은 가시성을 설명하는데 유의한 변인으로 나타났다. 제품 태도는 혁신특성과 구매 의도 사이에서는 부분매개 역할을, 위험지각과 구매의도 사이에서는 완전매개역할을 하는 것으로 나타났다. 본 연구는 스마트의류 구입 시 소비자가 인지하는 혁신특성과 지각된 위험의 유형을 파악함으로써 스마트의류 마케터들이 소비자의 긍정적인 태도 형성을 위한 마케팅 전략 수립 시 활용할 수 있는 기초 정보를 제시하였다.

  • PDF

간호학 교과과정 개선을 위한 조사 연구 (A Study on improvement of curriculum in Nursing)

  • 김애실
    • 대한간호학회지
    • /
    • 제4권2호
    • /
    • pp.1-16
    • /
    • 1974
  • This Study involved the development of a survey form and the collection of data in an effort-to provide information which can be used in the improvement of nursing curricula. The data examined were the kinds courses currently being taught in the curricula of nursing education institutions throughout Korea, credits required for course completion, and year in-which courses are taken. For the purposes of this study, curricula were classified into college, nursing school and vocational school categories. Courses were directed into the 3 major categories of general education courses, supporting science courses and professional education course, and further subdirector as. follows: 1) General education (following the classification of Philip H. phoenix): a) Symbolics, b) Empirics, c) Aesthetics. 4) Synthetics, e) Ethics, f) Synoptic. 2) Supporting science: a) physical science, b) biological science, c) social science, d) behavioral science, e) Health science, f) Educations 3) Professional Education; a) basic courses, b) courses in each of the respective fields of nursing. Ⅰ. General Education aimed at developing the individual as a person and as a member of society is relatively strong in college curricula compared with the other two. a) Courses included in the category of symbolics included Korean language, English, German. Chines. Mathematics. Statics: Economics and Computer most college curricula included 20 credits. of courses in this sub-category, while nursing schools required 12 credits and vocational school 10 units. English ordinarily receives particularly heavy emphasis. b) Research methodology, Domestic affair and women & courtney was included under the category of empirics in the college curricula, nursing and vocational school do not offer this at all. c) Courses classified under aesthetics were physical education, drill, music, recreation and fine arts. Most college curricula had 4 credits in these areas, nursing school provided for 2 credits, and most vocational schools offered 10 units. d) Synoptic included leadership, interpersonal relationship, and communications, Most schools did not offer courses of this nature. e) The category of ethics included citizenship. 2 credits are provided in college curricula, while vocational schools require 4 units. Nursing schools do not offer these courses. f) Courses included under synoptic were Korean history, cultural history, philosophy, Logics, and religion. Most college curricular 5 credits in these areas, nursing schools 4 credits. and vocational schools 2 units. g) Only physical education was given every Year in college curricula and only English was given in nursing schools and vocational schools in every of the curriculum. Most of the other courses were given during the first year of the curriculum. Ⅱ. Supporting science courses are fundamental to the practice and application of nursing theory. a) Physical science course include physics, chemistry and natural science. most colleges and nursing schools provided for 2 credits of physical science courses in their curricula, while most vocational schools did not offer t me. b) Courses included under biological science were anatomy, physiologic, biology and biochemistry. Most college curricula provided for 15 credits of biological science, nursing schools for the most part provided for 11 credits, and most vocational schools provided for 8 units. c) Courses included under social science were sociology and anthropology. Most colleges provided for 1 credit in courses of this category, which most nursing schools provided for 2 creates Most vocational school did not provide courses of this type. d) Courses included under behavioral science were general and clinical psychology, developmental psychology. mental hygiene and guidance. Most schools did not provide for these courses. e) Courses included under health science included pharmacy and pharmacology, microbiology, pathology, nutrition and dietetics, parasitology, and Chinese medicine. Most college curricula provided for 11 credits, while most nursing schools provide for 12 credits, most part provided 20 units of medical courses. f) Courses included under education included educational psychology, principles of education, philosophy of education, history of education, social education, educational evaluation, educational curricula, class management, guidance techniques and school & community. Host college softer 3 credits in courses in this category, while nursing schools provide 8 credits and vocational schools provide for 6 units, 50% of the colleges prepare these students to qualify as regular teachers of the second level, while 91% of the nursing schools and 60% of the vocational schools prepare their of the vocational schools prepare their students to qualify as school nurse. g) The majority of colleges start supporting science courses in the first year and complete them by the second year. Nursing schools and vocational schools usually complete them in the first year. Ⅲ. Professional Education courses are designed to develop professional nursing knowledge, attitudes and skills in the students. a) Basic courses include social nursing, nursing ethics, history of nursing professional control, nursing administration, social medicine, social welfare, introductory nursing, advanced nursing, medical regulations, efficient nursing, nursing english and basic nursing, College curricula devoted 13 credits to these subjects, nursing schools 14 credits, and vocational schools 26 units indicating a severe difference in the scope of education provided. b) There was noticeable tendency for the colleges to take a unified approach to the branches of nursing. 60% of the schools had courses in public health nursing, 80% in pediatric nursing, 60% in obstetric nursing, 90% in psychiatric nursing and 80% in medical-surgical nursing. The greatest number of schools provided 48 crudites in all of these fields combined. in most of the nursing schools, 52 credits were provided for courses divided according to disease. in the vocational schools, unified courses are provided in public health nursing, child nursing, maternal nursing, psychiatric nursing and adult nursing. In addition, one unit is provided for one hour a week of practice. The total number of units provided in the greatest number of vocational schools is thus Ⅲ units double the number provided in nursing schools and colleges. c) In th leges, the second year is devoted mainly to basic nursing courses, while the third and fourth years are used for advanced nursing courses. In nursing schools and vocational schools, the first year deals primarily with basic nursing and the second and third years are used to cover advanced nursing courses. The study yielded the following conclusions. 1. Instructional goals should be established for each courses in line with the idea of nursing, and curriculum improvements should be made accordingly. 2. Course that fall under the synthetics category should be strengthened and ways should be sought to develop the ability to cooperate with those who work for human welfare and health. 3. The ability to solve problems on the basis of scientific principles and knowledge and understanding of man society should be fostered through a strengthening of courses dealing with physical sciences, social sciences and behavioral sciences and redistribution of courses emphasizing biological and health sciences. 4. There should be more balanced curricula with less emphasis on courses in the major There is a need to establish courses necessary for the individual nurse by doing away with courses centered around specific diseases and combining them in unified courses. In addition it is possible to develop skill in dealing with people by using the social setting in comprehensive training. The most efficient ratio of the study experience should be studied to provide more effective, interesting education Elective course should be initiated to insure a man flexible, responsive educational program. 5. The curriculum stipulated in the education law should be examined.

  • PDF

Sensory Information Processing

  • Yoshimoto, Chiyoshi
    • 대한의용생체공학회:의공학회지
    • /
    • 제6권2호
    • /
    • pp.1-8
    • /
    • 1985
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

  • PDF

관절염환자(關節炎患者)의 특성(特性)에 대한 조사(調査) 연구(硏究) (A Research in the Characteristic of Arthritis Patienth)

  • 강점덕;남철현;김기열
    • 대한예방한의학회지
    • /
    • 제1권1호
    • /
    • pp.149-165
    • /
    • 1997
  • In order that, investigating the feature of patients suffering arthritis, analysing its contents, and grasping a Primary factor affecting it, I might offerbasic datas which could help to plan and perform healthy affairs to thake precautions beforehand, I have investigated, analysed, and studied a total of 320 patients suffering arthritis, who have received physiotherapy in hospital located in Teaegu area for five months, from November 1 1995 to March 30 1996, of which summary and conclusion is this. 1. The general feature of patients in investigative objects In the distribution of the distinction of sex, men accounted for 26.9% and women, for 73.1%, and, in the fistribution of age, 60-year-old or more, most for 27.2% and from 20 to 29 years old, least for 14.0%. In the distinction of a vocation, housewives most accounted for 34.7% and students(jobless men), least for 19.3%. In the distinction of a matrimonial state, married persons most accounted for 76.7% and people living alone(divorce, separation by death, separation), least for 11.4%. In the distinction of an economic state, the middle classes most accounted for 73.5% and the upper classes, least for 2.9%. In the distinction of their academic careers, graduates of a primary school most accounted for 26.9% and graduates of university, for 14.1%, of which patients, having the ability to decode the national language, reached to 11.3%. In the distinction of the house form, people living in independent houses most accounted for 76.4% and residents in apartment(having an elevator), least for 9.4%. 2. In the distribution of the recurring state in the distinction of the feature, the recurring group was more than the group of patients falling that ill at first as 62.2% and in the distinction of the feature of the recurring group, the recurring group turned high in case of men being from 50s to 60s years old or more, people living alone (divorce, separation by death, separation), students (joblessmen), people working in farming, stockbeeding, forestry, fisheries, a simple labour, graduates of a primary school I having the ability to decode the national language, the upper classes, people part two years since they begined to suffer arthritis, people who had members having ever experienced arthritis among families. 3. In the distribution of arthritis on the distinction of bodily pars, a knee articulation most accounted for 50.2% and the articulation of fingers, for 8.8%, wile the simultaneous, several parts (multiple) accounted for 35.1%. In the distinction of the feature, arthritis of a knee turned high in case of men being from 20s to 30s years old, unmarried persons, people having academic careers of university, the middle classes, residents in apartment (having stairs). In the dictnction of a feature the case of several parts (multiple) turned high in case of women being from 50s to 60s years old or more, people living alone (divorce, separation by death, separation), people having the ability to decode th. national language, the graduates of a primary school, the upper classes, residents in apartment (having elevator). 4. In the distribution of arthritis on e distinction of a contracting term, two years or more most accounted for 51.6% and the case of contacting from one year to two years, for 15.3%. Analysing the distinction of the feature, the case of two years or more turned high in case of women being from 50s to 60s years old or more, people living alone (divorce separation by death, separation), the upper classes, people having the ability to decode the national language, residents in apartment (having elevator). 5. In the distribution of an treatment institution before patients came to help, their not curing most accounted for 39.1%, general, orthopedic, neurological surgery (physical therapy), for. 20.0%, and th. therapy of Chinese medicine (acupuncture, moxacautery, Chinese medicine), for 17.5%, and a pharmacy (medical therapy), for 13.4%. The case of patients not curing, in the distinction of a feature, turned high in case of men 20s years old, unmarried, the lower classes, people having academic careers of university, residents in apartment (having elevator). 6. In e distribution of the extent of satisfaction with treatment, common most accounted for 54.4% and some satisfaction, for 32.8%. The case of common, in the distinction of a feature, turned high, in case of men living alone from 50s to 60s years old (divorce, separation by death, separation), married persons, the upper classes, people having academic careers of university, residents in independent house, residents in apartment (having elevator), 7. In the distribution of the degree of knowledge of the cause of arthritis, patients knowing that the cause is to use very much a articulation in normal times most accounts for 60.1%, and patients knowing the state of short nutrition as a cause, for 2.5%. The case of patients knowing that the cause is to use very much in normal times, in the distinction of a feature, turned high in·case of ment being 20s and 60s years old or more, unmarried persons, e lower classes, people having the ability to decode. the national language, people having academic careers of university, residents in apartment (having stairs), 8. In the distribution of the state of physical exercise before arthritis contracted, patients exercising very much on the whole most accpimend for 40.3%, and patients not exercising, for 34.7%. The case of patients exercising very much on the whole, in the distinction of the feature, turned high in case of men being from 50s to 60s years old or more, people living alone(divorce, separation by death, separation), the lower classes, people having the ability to decode the national language, graduates of a primary school, residents in apartment (having elevator). 9. In the taste of patients suffering from arthritis, while the group of patients falling that ill at first and the recurring group didn't smoke cigarets, during alcohol and coffee on the whole, and the group of patients falling once again that ill drank a cup of distilled linquor and three cup of coffee or more on the whole per one day, and the group of patients falling that ill at first liked sort of vegetables and the recurring group liked very much sons of vegetables and fresh and meat in their loving food normal times. 10. Analysing the distribution on the dining table used by patients and the structure of a powder room, at first, in the structure of a powder room, the group of patients filling that ill have a toilet stool using as their sits, and a Bush toilet on the whole, and the recurring group, a toilet stool using as their sits and conventional type, and in the structure of a dinning table, the group of patients falling that ill at first and the recurring group turned high, each as 66.9% and 6.3%, who have a dining table carring here and there. 11. In the distribution of patients of arthritis in relation to stress, the case that they feeled severly symptoms of arthritis when thay got stress, turned high, each, as 78.6% in the recurring poop, and the case not knowing, as 61.5% in the first group. In the extent of stress normal times, the case that they got much stress on the whole turned high, each, as 72.4% in e recurring group, and the care that got less stress on the whole, as 60.0%. 12. In the distribution on the distinction of symptoms and impedimental extent, the recurring group turned high in each variable. Analysing the feature of the recurring group, in the distinction of symptoms, the case that they fooled much that the node of an articulation is stiff, turned high, as 71.6, and in the distinction of treatment before. patients came to helpk, the theraphy of Chinese medicine (physical theraphy), as 84.4%, the theraphy of Chinese medicine (acupuncture, moxacautery, Chinese medicine), as 73.2%, and in the distinction of the satisfing extent on treatment, the case of comman, as 72.3%, and in the cause of arthritis, the case not recruiting their health after a birth, as 68.5%, and the case not recovering wholely an articulation having got hurt, as 62.8%, and in the state of physical exercise before they begined suffering from arthritis, the case exercising very much on the whole, (as 74.2%), and in the extent of subjective impediment, the case of not being able to act almost, as 66.7%, the case of acting but feeling some hard, as 66.3%. 13. The correlation in variables in relation to arthritis Analysing realted variables, the recurring frequency showed correlation with such as the extent that patients got stress normal times, and the exercising state before suffering arthritis, and showed contra-correlation with academic careers, the wights, coffee. The cigaret, e loving food of taste, showed corralation with the weight, stature, alcohole as the loving food of taste. On the basis of this result medical members of heal, who are related to the regular education, public education or development of this program, should be concerned to prevent orthris.

  • PDF

High Resolution HC$_3$N Observations toward the Central Region of Sagittarius B2

  • H.S-Ching;Oh, M.ishi;M.Morimoto
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 1993년도 한국우주과학회보 제2권2호
    • /
    • pp.17-17
    • /
    • 1993
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

  • PDF