• Information Systems Review
• /
• v.6 no.2
• /
• pp.227-242
• /
• 2004

With the advent of the digital economy, the business eco-system has been changing from the competition system across individual companies to that of supply chains. Under the rapidly changing business environment, it becomes true that the competitive power of the steel maker depends on the shipbuilding company, an important customer of the steel maker. Accordingly, e-partnering between a steel maker and shipbuilding companies becomes important. Schemes of developing e-partnering are presented as follows: implementation of the inter-communication system, day/sequence order and supply, improvement of infrastructure such as transport, quay etc.

• Geomechanics and Engineering
• /
• v.9 no.5
• /
• pp.645-667
• /
• 2015

Single treatment and staged treatments in vertical wells are widely applied in sandstone and mudstone thin interbedded (SMTI) reservoir to stimulate the reservoir. The keys and difficulties of stimulating this category of formations are to avoid hydraulic fracture propagating through the interface between shale and sand as well as control the fracture height. In this paper, the cohesive zone method was utilized to build the 3-dimensional fracture dynamic propagation model in shale and sand interbedded formation based on the cohesive damage element. Staged treatments and single treatment were simulated by single fracture propagation model and double fractures propagation model respectively. Study on the changes of fracture vicinity stress field during propagation is to compare and analyze the parameters which influence the interfacial induced stresses between two different fracturing methods. As a result, we can prejudge how difficult it is that the fracture propagates along its height direction. The induced stress increases as the pumping rate increasing and it changes as a parabolic function of the fluid viscosity. The optimized pump rate is $4.8m^3/min$ and fluid viscosity is $0.1Pa{\cdot}s$ to avoid the over extending of hydraulic fracture in height direction. The simulation outcomes were applied in the field to optimize the treatment parameters and the staged treatments was suggested to get a better production than single treatment.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.341-352
• /
• 2005

This study tries to analyze the dynamic market mechanism adopting relationship marketing techniques targeting between the shipping companies and shippers. Shipping companies rely on sales operation. so that analyzing the relation of structure of shipping companies and shippers needs to focus on the sales person's characteristic relationship and shipping company characteristic relationship. Therefore this study tries to focused on shipping companies to make a long term relationship with shippers affect matters which are, main of relationship quality and antecedent factor of characteristics of the shipping company and characteristics of the salesperson. It can be proffered available informations for construction of long term relationship between shipping companies and shippers.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.131-136
• /
• 2006

This study proposes the introduction of management assessment system an the remote island route passenger companies in a way of stimulating the companies to make sustained efforts on management improvement, and come up with the ways of management assessment index and management assessment methods by using the AHP scheme. These indices are organizes in three categories. The main category is consisted of responsible management part, management an control part, business operation part and customer satisfaction part, and the intermediary category has the 15 items including the efforts for responsible management, and the sub category is consisted of 44 items including the management vision of executive and participation of enterprise in responsible management, and others. The scoring of these indices is the result of scoring by calculating the added weight for each category by using the AHP scheme tint it is considered as needed for the scoring adjustment for each standard of assessment index by the adjustment of added weight for categories with the consideration of shipping company operation and shipping characteristics while undertaking the actual affairs.

• Journal of Society of Preventive Korean Medicine
• /
• v.23 no.2
• /
• pp.43-51
• /
• 2019

Objectives : This study aimed to analyze price variance by year, region and company of raw herbal medicines to draw payment system for herbal medicine insurances in the National Health Insurance. Methods : To analyse price variance, we used 2015-2017 data of 'Quality test results of imported herbal medicines' provided by Korea Pharmaceutical Traders Association and 'Price data of 56 raw herbal medicines' that was surveyed by the Association of Korean Medicine. We analysed gap of highest price and lowest price those were compared with average price and coefficient of variation(CV) of prices by year, region and company of raw herbal medicines. Results : In analysing 3 years data, the highest price was 23.2% higher, and the lowest price was 19.1% lower than the average price. As of 2018, the average price of domestic produced herbal medicines was 1,8 times higher than that of imported herbal medicines. By companies, the highest price was 117.5% higher, and the lowest price was 57.3% lower than the average price. Conclusions : The price of herbal medicines varied by production year, region and company. This results suggest that comprehensive payment model needs to be considered in modeling the health insurance coverage for herbal medicine decoctions.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.22-35
• /
• 2016

In this study CALPUFF modeling was performed to establish a correlation between regions of frequent civil odor complaints near Gumi national industrial complex and odor-emission facilities of synthetic fiber manufacturers in the same area as main acetaldehyde-emission point sources. As a result of the CALPUFF modeling, the maximum concentration of acetaldehyde in Gumi national industrial complex was reduced from O ($10^{-5}g/m^3$) to O ($10^{-6}g/m^3$) upon improving emission facilities of T company so that the maximum concentrations of acetaldehyde frequently appeared in complex 3. In addition, the predicted range of the maximum acetaldehyde concentration in Gumi national industrial complex was also improved in comparison with that prior to improving emission facilities of T company. These maximum concentrations of acetaldehyde obtained to estimate the expected contribution of total acetaldehyde point source by CALPUFF modeling showed the similar values to those measured in 'HAPs investigation in the region of Gumi-Daegu' and were consistent to the trend of civil odor complaints. Therefore, the expected contribution of total acetaldehyde point source was validated. The relative contribution of T company upon improving its emission facilities was predicted to be lowered by more than factor of two, compared to that prior to improving its emission facilities. To the contrary, the relative contribution of W company upon improving emission facilities of T company was predicted to be increased by more than factor of two, compared to that prior to improving emission facilities of T company. This indicates that the contribution of aldehyde point sources of W company was relatively increased upon improving emission facilities of T company.

• Industrial Engineering and Management Systems
• /
• v.13 no.3
• /
• pp.252-257
• /
• 2014

Global economic recession, global market reduction, and the deteriorating economic recession are forcing the industry to reconsider the business plan and strategy related to supply chain regardless of the size of the companies. During the economic recession caused by financial anxiety, development of international collaborative producer is the key theme for a manufacturing industry to get over the situation. Especially, development of high-skilled people who are capable of handling global manufacturing management is the key factor in China which shifted from a world factory to a world market. In this background, we started the international project of global manufacturing education and training for Chinese company managers from 2009. In this paper, based on the research conducted by the universities and companies in China, a design of global manufacturing education and training is proposed. This presented design is based on the theory of Japanese production strategy and investigation of actual conditions for Chinese companies and the research methodology of business management practice with efficiency and productive for international level management organization. The effectiveness of the education design is evaluated by applying the international education and training project of Aoyama Gakuin Human Innovation Consulting Inc. and Vigor Management Technology Association.

• Korean Institute of Interior Design Journal
• /
• v.16 no.1 s.60
• /
• pp.83-90
• /
• 2007

The identity of Korean housing culture has been the subject of discussion in the past several decades. Recently construction company is using the expression of Korean Identity based on traditional housing as a strategic concept. There, however, has yet been found a concrete solution despite the ambitions intent to modernize Korean tradition. In this circumstances, this research was intended to understand the characteristics of traditional housing preferred by consumers, in order to embody the scheme in which Korean tradition can be modernized. The main conceptual characteristics and concrete examples were included in the characteristics of traditional housing. In result, Environment-Friendliness, Visual Openness, Human-Centeredness have been turned out to be the most preferred attributes amongst the major concept characteristics of traditional housing. In concrete case of Environment-Friendliness, the use of healthy natural materials such as timber or yellow mud was preferred the most. Consumers were also especially fond of open passage through connecting front and back balcony as for Visual Openness, and spaces created based on human body measurements regarding Human-Centeredness. The Savored characteristics of traditional housing varied by gender, age, family type, income, and scale of residence. The result of this research will be useful for housing construction company in planning Korean style apartments and also exploring preferred qualities according to the type of consumer.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.06a
• /
• pp.63-64
• /
• 2014

NIR(New Inspection Regime, hereinafter NIR) relating to the PSC(Port State Contorl, hereinafter PSC) has implemented in Asia-Pacific region under Tokyo-MOU from last January 2014. The most noticable difference between NIR and existing TF(Target Factor, hereinafter TF) is to evaluate company performance and to conduct PSC with flexible inspection interval on the basis of Ship Risk Profile; High Risk Ship, Standard Risk Ship and Low Risk Ship.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.213-214
• /
• 2016

Based on the efficient supply chain management which will be derived the customer satisfaction, the developing strategies about the scale and location of distribution center(DC) is a very important decision factors to improve the logistics cost efficiency. To do this, we will analyze the conventional DCs' location and cost which belongs to 'D' grocery company operating in Korea and propose the useful way for relocating and establishing DC in company to satisfy the reduction target of logistics cost.