• International Journal of Air-Conditioning and Refrigeration
• /
• 제11권4호
• /
• pp.209-217
• /
• 2003

The term “energy saving is economical” is appropriate for the national view point and for design and assessment of one system, but not appropriate when choosing the system by comparing alternative systems in the early design step. Sometimes, non-energy saving system is more economical than energy saving system because of the price of electricity, gas or oil, which are used for operating the air conditioning system. Therefore, when designing a system, we should consider the efficient alternatives through economic assessment of energy saving method. However, research on non-operating number control of the system is not sufficient because it is more common to use operating number control of the system for most economic assessment of air conditioning systems. For this reason, this research can provide the economic operating number control method as basic design data. The data obtained through analysis of life cycle cost based on amount of yearly energy use, are produced by system simulation of HASP/ACLD/8501 and HASP/ACSS/8502 for six alternative heating$.$cooling systems based on seasonal air conditioning system, which is widely used for medium and large size office buildings in Busan.

• 환경위생공학
• /
• 제17권4호
• /
• pp.39-46
• /
• 2002

The purpose of this research was to get an alternative idea about the situation and problems of domestic pest control company We performed a questionnaire survey of 105 companies to find the situation and problems of pest control companies with and with out lincensed sanitarians. The investigation revealed the following issues and the conclusions summarized. 1. Companies with lincensed sanitarians have shown to put forth hygenic safety(62%) as first priority as to companies without sanitarians neglect hygenic safety and rank financial benefit(40%) as their priority. 2. Companies with lincensed sanitarians have directions on its use of pesticides but the companies without inspectors rely only on field experiences. 3. Companies with lincensed sanitarians are known to use the safety equipment. To the contrary, companies without sanitarians worked without the proper safety equipment safety gear. 4. Companies with sanitarians been regularly received educational Programs on chemicals used in the pest control. And then companies without did not have my other educational programs for chemicals they used.

• KIEAE Journal
• /
• 제11권2호
• /
• pp.17-25
• /
• 2011

In order to provide basic data for designing the outdoor exercise environment to promote the health of the citizens, this study has analyzed the status of citizens' use of outdoor exercise places that have been supplied extensively recently and the factors affecting the citizens' choice of the places. A survey was made on 20 spots in 12 places where outdoor exercise equipment is installed to identify the characteristics of use and the factors affecting the selection of the spots and for the 1,733 survey sheets collected finally SPSS program was used to analyze the multiple answers. Major results of this research are as follows: First, since light exercise equipment mostly for bodily exercises has been installed, it has brought practical effects for the physically weak people, aged people and the people who scarcely exercise, while decreasing the users' economic burdens. Second, the scales of important factors the users think in selecting their exercise spots were 'spaciousness (2,028 times)' > 'accessibility (1,751 times)' > 'fitness (1,583' > 'supportability (1,445)' > 'community centeredness (1,260).' Third, the ratios of important factors regarding the choice of environment of outdoor exercise were 'near to walk (16.1%)' > 'nice natural environment (12.3%)' > 'always free to exercise (9.7%)' > 'shortage of exercise equipment (7.4%)' > 'possible to accompany family/neighbors (6.7%)' > 'no economic burden (6.5%).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술대회 논문집 전문대학교육위원
• /
• pp.127-131
• /
• 2003

We have investigated about kinds of the equipment according to use. They have many kinds of equipments, namely conductive cloths, insulated gloves, conductive shoes, insulated sticks, swivel boom, fittings and insulator cradles etc. We have suggested about use of equipments, basic functions and shapes.

• 국제초고층학회논문집
• /
• 제1권1호
• /
• pp.15-19
• /
• 2012

Occupant footfalls are often the most critical source of floor vibration on upper floors of buildings. Floor motions can degrade the performance of imaging equipment, disrupt sensitive research equipment, and cause discomfort for the occupants. It is essential that low-vibration environments be provided for functionality of sensitive spaces on floors above grade. This requires a sufficiently stiff and massive floor structure that effectively resists the forces exerted from user traffic. Over the past 25 years, generic vibration limits have been developed, which provide frequency dependent sensitivities for wide classes of equipment, and are used extensively in lab design for healthcare and research facilities. The same basis for these curves can be used to quantify acceptable limits of vibration for human comfort, depending on the intended occupancy of the space. When available, manufacturer's vibration criteria for sensitive equipment are expressed in units of acceleration, velocity or displacement and can be specified as zero-to-peak, peak-to-peak, or root-mean-square (rms) with varying frequency ranges and resolutions. Several approaches to prediction of floor vibrations are currently applied in practice. Each method is traceable to fundamental structural dynamics, differing only in the level of complexity assumed for the system response, and the required information for use as model inputs. Three commonly used models are described, as well as key features they possess that make them attractive to use for various applications. A case study is presented of a tall building which has fitness areas on two of the upper floors. The analysis predicted that the motions experienced would be within the given criteria, but showed that if the floor had been more flexible, the potential exists for a locked-in resonance response which could have been felt over large portions of the building.

• 한국재난정보학회 논문집
• /
• 제16권1호
• /
• pp.163-177
• /
• 2020

연구목적: 최근 시설물 유지관리의 중요성이 높아짐에 따라 시설물 유지관리 분야에 첨단기술의 도입과 활용이 증가하고 있다. 첨단기술이 현장에서 실효적 효과를 발휘하기 위해서는 진단장비의 검인증제도를 통한 신뢰성 확보가 필요하나 제도도입에 대한 사회적인 요구와는 별개로 업계의 시각 및 현실적인 기술수준에는 차이가 존재하고 있다. 본 논문에서는 현황에 대한 종합 및 실무자에 대한 의견조사를 통해 합리적인 시설물 진단장비 검인증 제도의 도입 방향을 연구하였다. 연구방법: 시설물 점검 및 진단장비의 첨단기술 도입 및 활용 촉진을 위한 검인증제도 도입 필요성 및 시급성에 대하여 유지관리 및 건설 분야 실무자들을 대상으로 설문조사를 실시하였다. 또한 일본 및 국내 장비 관련 유사인증제도의 비교분석을 통해 첨단 시설물 진단장비에 대한 검인증제도 도입 방향을 검토하였다. 연구결과: 첨단기술 적용에 대하여 실무자 의견은 높은 비율로 유지관리 분야에 드론 및 로봇 등 첨단기술의 도입이 필요하며, 첨단기술 도입 시 현장에서 상당한 효과를 발휘할 것으로 조사되었다. 반면 현재 국내의 기술 수준은 상대적으로 낮아 기술적용에는 일정한 시간이 소요될 것으로 조사되었다. 또한 시설물 진단장비 검인증제도의 도입을 통해 신뢰성 높은 시설물 진단장비 보급될 것으로 조사되었다. 한편, 국내외 진단 및 계측 장비 등에 대한 유사제도 조사결과, 직접적으로 시설물 유지관리에 첨단기술을 적용한 장비를 검인증 하는 제도는 없으며, 다만, 일본에 진단장비의 성능평가 체계가 도입되어 있다. 국내의 융복합기술이 적용된 제품 인증제도 및 운용중인 186개 인증제도 가운데 유사한 21개 계측 및 진단장비 인증제도를 분석하여, 첨단시설물진단장비에 대한 검인증제도 도입방안을 제시하였다. 결론: 실무자들의 의견을 종합하면 시설물 유지관리 분야의 합리화를 위하여 진단장비에 대한 4차 산업혁명 기술의 적용과 신뢰성 높은 진단장비 활용을 지원하는 검인증제도의 도입은 충분한 타당성을 갖는 것으로 볼 수 있다. 그러나 현실적인 과제는 우리나라의 첨단기술 수준이 시급성에 비하여 낮게 평가되고 있어 첨단 시설물 점검 및 진단장비 검인증 제도는 기술적용 및 검증 수준을 고려한 단계적 확대 형태로 시행되어야 한다. 또한 검인증제도 도입과는 별개로 시설물 진단장비 첨단화 촉진을 위한 별도의 투자 및 지원과 노력이 필요 하다.

• 한국콘텐츠학회논문지
• /
• 제8권12호
• /
• pp.322-333
• /
• 2008

본 연구는 500병상 규모의 병원에서 PACS 도입 시 준비 작업 및 제안서에 포함 되어야 할 항목과 의료장비 도입 전 검토조서의 제시로 장비 도입 전 수익성 및 운용 부서에서 계획서에 제시 된 예상수익을 근거로 하여 장비의 이용도와 수익성을 조사하여 고가의료장비의 구입 원가, 이용도 등을 분석하였다. 연구대상 병원에서 PACS 도입 시 수가로 인하여 수익이 발생되는 것으로 나타났고, 의료장비 구입 방법은 임차 방식으로 기간은 3년에서 5년으로 나타났으며, 수익은 2년 정도이면 투자비용을 상회하여 수익이 발생 될 것으로 예상되었다. 병원의 PACS를 도입 운영에 있어서 의료장비 구매 금액은 영상의학과의 운영에서 발생되는 수익을 근거로 할 때 투자비용은 약 1.9년 정도이면 투자금액을 회수 할 수 있을 것으로 예상되었으며, 영상의학과의 재촬영 검사의 감소와 필름 및 현상 정착액을 구입하지 않아 운영비를 절감할 수 있는 것으로 나타났다. 또한, 실질적인 수익 증가 외에도 병원 마케팅 차원에서 병원의 위상 향상, 직원들의 업무절감 등에 의한 업무 환경개선 또는 업무 스트레스 감소 등 병원 직원의 업무 만족도 증가로 인한 병원의 서비스 향상에도 기여하는 것으로 나타났다. 이와 같은 결과 병원규모에서 PACS 도입 시 의료장비의 예상 수익을 작성하고 진료업무의 기여도 및 구매 후에도 수익 등을 비교 분석하여 의료장비 도입 전 제안서 작성과 도입 후 효율적인 장비 운영 계획을 수립해야 할 것으로 사료되었다.

• Journal of Construction Engineering and Project Management
• /
• 제2권4호
• /
• pp.11-19
• /
• 2012

Construction supply chain management (CSCM) has become one of the critical factors that determine the success of a construction project as it becomes increasingly complicated and mega-sized. Particularly for high-rise or mega-sized building construction, just-in-time supply chain management is required due to lack of storage space and effective logistics for construction components and materials at a construction site. Despite the fact that research and development of radio frequency identification (RFID) and wireless sensor network (WSN) technology have been performed, construction project managers still need to carry mobile devices and check material and component flow at each stage of the supply chain process. This research proposes that the equipment used in the construction supply chain process, such as movers, trailers, gates, and hoists, can become main actors in the supply chain process using RFID and WSN technologies. And the proposed equipment and process focused on a solution to the redundancy identification problem, which has been observed in operations that use RFID/WSN-based processes for construction logistics. This paper also presents issues identified through verification and validation of the research results and proposes further studies.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1991년도 제6회 파동 및 레이저 학술발표회 Prodeedings of 6th Conference on Waves and Lasers
• /
• pp.1-1
• /
• 1991

The fabrication of computer components requires a great variety of optical equipment. The patterning of integrated circuits is performed either on step-and-repeat cameras, scanning systems or step-and-repeat systems. The image forming optics used in these machines is quite difficult to design and fabricate. In addtion several layers of patterns must be precisely superposed, and also the illuminators have to provide the final irradiance in the image plane constant to within 1%. Other uses of specialized optical equipment are mass production of chip packages, inspection scanners and laser ablation cameras for polymers. The details of some of these systems will be described with particular ephasis on different optical structures and the use of excimer lasers as light sources.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.219-225
• /
• 2013

State transportation agencies utilize fleets of heavy equipment to construct and maintain roadways. Equipment cost models can be developed to forecast economic life, which is the point at which the average unit cost to date reaches a minimum. A calculated economic life and cost models can be used to quantify the impacts of management strategies applied to a fleet. The purpose of this research was to develop an accurate method of quantifying the results of management strategies applied to a fleet of heavy construction equipment. The strategies evaluated are related to the annual usage of the fleet and the size of the fleet. More specifically the methodology is used to adjust the economic model to consider a limit to the annual decline in machine usage and a reduction in the number of machines in the fleet. When limiting annual machine usage, a specified rate is applied to the usage of the fleet, while total usage is held constant. This causes aging at a modified rate. A reduction in fleet size also causes a change to the usage of a fleet as the fleet must use fewer machines to produce the same total usage.