• 한국전자거래학회지
• /
• 제25권2호
• /
• pp.127-146
• /
• 2020

해외 선진국은 연구장비의 중요성을 인식하고 연구장비 산업 활성화를 위해 많은 정책적 지원을 하고 있다. 그러나 우리나라는 연구장비산업 활성화를 위한 정책이나 관련 사업을 지원할 수 있는 법률이 없다. 따라서 연구장비산업 활성화를 위한 정책과 사업을 지원하기 위한 입법이 시급하다. 연구장비산업의 글로벌 시장에서 경쟁력을 확보할 수 있도록 별도의 연구장비산업 활성화 특별법을 제정할 필요가 있다고 판단된다. 본 바와 같이 연구장비 산업 육성을 위한 다양한 진흥정책이 개발될 수 있도록 관련 법률에 필요한 사항을 명시해야 한다. 연구장비 산업발전을 촉진하기 위해서는 법에 명시해야 할 필수항목이 세 가지다. 첫째는 연구개발 지원, 둘째는 인프라 개발, 셋째는 비즈니스 육성이다. 각 내용에는 다음과 같은 내용이 포함되어야 한다. 우선 '연구개발 지원'에는 연구개발사업 추진 및 지원 정책항목, 연구장비 개발동향 및 투자동향, 산학관 공동연구, 융·복합·사업화를 위한 연구개발 지원 등이 포함된다. 다음으로 '인프라 개발' 포함될 항목에는 연구장비 클러스터 구축, 관련 지원항목, 전문인력 양성, 연구장비개발기반지역 및 기관 등이 포함되어야 한다. 마지막으로 '사업 육성'에 포함되어야 할 항목은 우수기업 육성 지원사항(우선구매제도 등), 기술이전 및 마케팅 관련 사항, 지식재산 보호에 관한 사항, 해외진출 촉진에 관한 사항 등이다.

• 한국항해항만학회지
• /
• 제36권2호
• /
• pp.131-140
• /
• 2012

Since 2000, S. Korea is building yachts through government supported localization, cooperation between industry and educational organizations, or partnerships with foreign firms but the yacht building has yet only accomplished trial manufactured ships and one-time production. Because of a lack of mass production, the industry assesses the domestic technical skills to an average 50~60% of developed countries and its market share is less than 1% in the world. In addition, domestic marine equipment is heavily depending on imports and the industry is experiencing shortage of technology and experts, small-sized companies, insufficient industry and educational organizations' cooperation networks, inadequate legislation and policies, deficient domestic market vitalization, and scarce international information. Thus, this study focuses on the alternative plans to strengthen competitiveness and to cope with problems in the southeast marine leisure equipment industry.

• 무역상무연구
• /
• 제75권
• /
• pp.159-177
• /
• 2017

In this paper, we examined trends and regulations of the global medical equipment industry through literature search. The medical equipment industry is attracting attention as a new growth engine in the Fourth Industrial revolution. However, the medical device industry is a highly competitive field due to product diversity, short product life cycle and technological advances. In addition, Medical equipment are related to human health and safety. Therefore, it can only be exported if it is approved by national or international standards. Therefore, from the development stage of the product, the medical equipment should designate the country to be exported and develop a medical equipment that meets the requirements for licensing the medical equipment in the country. Therefore, In this paper, In this paper, we will present the practical considerations of the medical equipment exporting company by examining the global medical equipment market trends and the regulations related to medical equipment in major countries.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 추계학술발표회
• /
• pp.272-272
• /
• 2017

• 한국항해항만학회지
• /
• 제30권10호
• /
• pp.801-808
• /
• 2006

조선분야의 부가가치 창출은 조선기자재 산업 활성화에 있다 하지만 우리나라 조선 분야 경쟁력은 내실보다는 외형에 치우치고 있는 것이 현실이다. 특히 조선기자재 분야는 선진국과 비교했을 때 빠른 시간 내에 경쟁력을 확보해야 하는 과제를 안고 있다. 이에 본 논문에서는 조선기자재 산업의 경쟁력 제고를 위해 조선기자재 특성, 조선기자재 산업 현황, 수요공급현황, 국산화 현황 등을 분석하고 이를 근거로 조선기자재 산업의 경쟁력 확보방안을 도출하는데 그 목적을 두었다. 이러한 연구를 토대로 조선기자재 산업 발전방향을 모색하고 더불어 경쟁력 확보에 필요한 근거 자료를 제공하고자 한다.

• 수산해양교육연구
• /
• 제22권4호
• /
• pp.516-528
• /
• 2010

The Korean marine equipment industry is, in significant ways, behind the shipbuilding industry. For example, in terms of the number of orders received, the shipbuilding industry has ranked first in the world since 2003. In contrast, the global competitiveness of Korea's marine equipment industry is still relatively weak. This is important not only for the equipment industry, but because these two industries have many links. The structure of this research was firstly, to identify theoretical issues by looking at the characteristics of the marine equipment companies, marketing recognition, uses of marketing, and financial outcomes. Second, the study developed an analytical framework for empirical examination using configuration of each factor. Third, each factor has been analysed empirically. Forth, this study presents the importance of marketing for marine equipment companies within Korea, as well as in a global market. Finally, the study suggests a new marketing strategy for Korea's marine equipment companies to achieve global competitiveness.

• 기술혁신연구
• /
• 제8권1호
• /
• pp.73-94
• /
• 2000

The main objective of this research is to examine the spillover effects of technological knowledge from IT industry to other industrial sectors and, based on empirical findings, to draw policy implications and suggest policy directions. To this end, we divide IT industry into IT equipment and IT service, assuming that these two sub-sectors are considerably different each other in terms of technology knowledge flow. Other industries are classified into 17 different sectors based on the KSIC of 1990. As the proxy measure of technological knowledge, the notion of R&D stock is employed. The Input/output(I/O) Table is used to define the inter-industrial flow pattern and to draw the knowledge flow matrix. As the research methodology, cost function model is employed to gauge the spillover effects of technological knowledge of IT industry. Based on the results of analysis, it is found that the economic impact of technology diffusion also exhibits a different pattern between IT equipment and IT service. The diffusion of IT equipment tends to show labor-substitution effect whereas IT service displays labor-creation effect. This fact should be considered in devising industry, education, and labor policy. The expectations from this research are as follows. First, the sectoral pattern, difference between IT equipment and service in particular, identified from this research may shed light on the sector-specific policy direction. It is emphasized that a sector-specific approach, rather than an aggregate approach, is relevant for formulating IT policy. Second, it is expected that the importance of technology diffusion programs and policy measures are recognized among policy makers in IT industry.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2018년도 공동국제학술발표회
• /
• pp.141-141
• /
• 2018

• 경영과학
• /
• 제8권1호
• /
• pp.41-50
• /
• 1991

Within the current construction industry, constractor equipment management practices lack structure and often are not addressed through an economic analysis and evaluation process. This paper explores two areas...cost of capital and inflation...with the intention of providing insight for a more structured and economic based approach to contractor equipment replacement practices rather than by the traditional "rule of thumb".umb".uot;.

• 한국환경보건학회지
• /
• 제39권6호
• /
• pp.522-531
• /
• 2013

Objectives: A field survey was conducted in a hog-raising industry in order to help develop personal protective equipment for workers which would secure the safety and the health of these workers. The attempt by this study will help enhance safety in the livestock industry and contribute to the advancement of the industry. Method: The study first selected a total of 111 workers from the hog-raising industry as research participants and designed a survey with questions on general characteristics, indoor and outdoor working environments, how the workers would in practice wear or purchase the working clothes, what needs to be improved in these new working clothes, how much the workers would be likely to accept the working clothes and protective equipment, and lastly, conditions of the communicable disease control overgarment. The collected data underwent frequency analysis and cross analysis with SPSS 21.0. Result: The research targets' average age was 50 years. Work efficiency by environmental factor was normal, but all age groups had experience of accidents (79.3%). Major wounded parts were under elbow and under knee. Protective equipment most commonly worn was helmet (83.4%), gloves (98.2%) and boots (99.1%), and satisfaction with them was normal at 3.41. Working clothing most commonly worn was old clothing (31.8%) and everyday wear (17.6%) and satisfaction with it was low. Considering the improvement of working clothing, they required attached pouches, elasticity and deodorization. The acceptability of improved working clothing was high at 69.2%. Conclusion: After problems have been addressed in relevant future research, what has been learned from the concerned study will be referred to as a useful basic reference when the relevant field works to develop high-quality working clothing and protective equipment for workers in the hog-raising industry.