• The Journal of Korean Institute for Practical Engineering Education
• /
• v.1 no.1
• /
• pp.61-65
• /
• 2009

Due to the less variety of experiment equipments for engineering education, the development of designated educational equipment is really in urgent need at most time. Especially for the in-depth engineering major subject, vibration engineering, there are almost no related educational equipments in Korea. Accordingly, in order to simulate the vibration phenomena occurred in the actual field, the development of educational equipment for vibration engineering theory and experiment education is required. This paper introduces four development educational equipments developed in graduated research works, which are critical speed test educational equipment, balancing machine educational equipment, isolation educational equipment using eddy current and active vibration isolation educational equipment. Through using them in experiment lesson, the utilization and practicality of educational equipment are verified. The proposed improvement for future development and application of educational equipment is shown in addition.

• Journal of Korea Technology Innovation Society
• /
• v.9 no.2
• /
• pp.279-303
• /
• 2006

We consider IT equipment industry, especially IT equipment exports, in Korea. Currently IT equipment exports are about 30% of the total exports in Korea. Furthermore the amount of IT equipment exports continues to increase. The impact of IT equipment exports to Korea economy must be large enough. However the research on this impact analysis is not found easily. In this paper we analyze the economic repercussion effects of IT equipment exports from 2002 to 2005 by using the Input-Output Analysis. The status of IT equipment exports in Korea is summarized. The extensive results on various levels of IT equipment industry are proposed.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1252-1252
• /
• 2022

Temporary work that utilizes temporary equipment (e.g., system scaffold and system pipe support) in construction work is one of the most vulnerable work from a safety perspective in South Korea. Typically, temporary equipment is reused at construction sites. The Korea Occupational Safety and Health Agency announced guidelines regarding the performance standards for reusable temporary equipment to prevent the accidental collapse of temporary facilities. Nevertheless, temporary facilities' collapse still occurs, which could be attributed to a degradation in the performance due to the reuse of temporary equipment. Therefore, this study investigated the performance of simple temporary structures assembled with new and reused equipment. To this end, an experimental module was designed based on previous research cases, and two experimental models were constructed, in which one was assembled using new equipment (Model A), and the other was built using reused equipment (Model B). To determine the performance of each model, a load test was conducted to measure the maximum load that each model could withstand. The experimental results revealed that the maximum load of Model B was 15% lower than that of Model A. This indicates that there is a meaningful performance difference between those two models. Based on this result, the authors decided to perform additional tests with more realistic models than previous ones. The new experimental module was designed to ensure compliance with the Korean design guidelines. In this presentation, the authors show details of the first tests and their results and plan for the additional test.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.179-187
• /
• 2020

This paper investigates the construction equipment accidents by time. Construction sites are unique with many different hazardous conditions which cause accidents. According to the Occupational Safety and Health Administration (OSHA), accidents related to construction equipment are one of the most leading causes of fatal injuries in the construction industry. While there have been many studies investigating the equipment-related accidents, few research studies provided in-depth analyses about the time that accidents frequently occurred. By using the OSHA accidents data collected between 1997 and 2012, this paper analyzed the accidents data by time, equipment type including excavator, backhoe, dozer, and crane, accident cause, and injury class. The analyses revealed that the time window with most accidents was between 13:00 and 13:59. In terms of the injury class, the time windows with the highest numbers of equipment accidents were between 13:00 and 13:59 and between 11:00 and 11:59 for fatality and hospitalization, respectively. For the accident causes, equipment operator's error was the highest number of accident causes. It is expected that findings from the analyses can be used to more strategically develop management plans and guidelines to prevent accidents related to construction equipment to practitioners.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.149-154
• /
• 2007

Now, in Korea, the performances of the building service equipment relay on the individual superintendent's share for the assessment of performance, fault detection, deterioration diagnosis of the building service equipment. As the result, very different quality of the performance or the durability of equipment is being obtained with his skill and effort and it is also not easy to assess that quality. This finally lead to the waste of labor force and the operating cost due to the high-cost, low-efficiency system. How to construct the N-BMS was considered to save energy, resource and to conserve performance of building service equipment. The FEMIS, facility, energy/environmental management & information system, for building service offer management process integrated with BAS, FMS and EMS and so on.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.3
• /
• pp.14-21
• /
• 1989

In the digital transmission equipment, the input jitter tolerance is a function of input timing recovery circuit characteristics. Especially, in the asynchronous multiplexers, it is also a function of the frame format, the buffer sizes in the synchronizer and desynchronizer, the PLL transfer function, and operating range of VCO in PLL In this paper, a new algorithm for calculating the jitter tolerance of the saynchronous digital transmission equipment is presented. With the new algorithm, we analyzed how the above factors limit the jitter tolerance in the equipment. We also measured the input jitter tolerance for a 45M-140M multiplexing equipment, whose results show the same trend with calculated tolerance.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.919-921
• /
• 2000

This paper considers the research of the hybrid interrupter which adopts both rotating arc and thermal expansion technology. The operating principle of this device depends on rapid arc rotation due to the magnetic field created by the fault current through a coil which is mounted on contacts and also relies on the principle of thermal expansion created by arc energy in extinguishing chamber and finally causes pressure rise in expansion volume. In this research, the principle of the interrupting techniques are given and experimental results of hybrid interrupter which is developed by new technology is introduced.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.1858-1868
• /
• 2021

Resisting an accidental impact of large commercial aircrafts is an important aspect of advanced nuclear power plant (NPP) design. Especially after the 9·11 event, some regulations were enacted, which required the design of NPPs should consider the accidental impact of large commercial aircrafts. Normal working of equipment is important for stopping reactor under an impact when an NPP is in operation. However, there is a lack of reliable analysis and research on the impact test of nuclear prototype equipment. Therefore, in order to study the response of the equipment under high acceleration impact, a centrifugal pump is selected as the research object to perform the impact test. A horizontal half-sinusoidal pulse wave was applied to the working pump. The test results show that the horizontal response of the motor and flange is greater compared to other parts, as well as the vertical response of the coupling. The stress response of the pump body support and motor support is high, hence these parts should be considered in the design of the pump. Finally, combined with the damage and stress evaluation results of the pump under different amplitudes, the ultimate impact acceleration that the pump can withstand is given.

• Journal of Environmental Science International
• /
• v.31 no.5
• /
• pp.447-456
• /
• 2022

This study was conducted to propose a way to increase the accuracy and precision of 𝛽-ray measurement equipment. Statistical processing results of equivalent evaluation data from 2016 to 2021 confirmed that the concentration of micro dust measured by 𝛽-ray measurement equipment was higher than that of micro dust sampler. According to quarterly data, it was confirmed that the data from the third quarter (July to September) showed a different trend from other periods, which is assumed to be due to weather conditions. This study indicates that automatic micro-dust measurement equipment evaluation at air pollution measuring stations during the third quarter should be excluded. The evaluation cycle should be changed from once every two years to quarterly. In addition, when the criterion for determining equivalence evaluation falls within the range of the slope and intercept values of the existing trend line, it is necessary to evaluate the R² value together and reduce the slope from 0.9-1.1 to 0.9-1.0.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.673-676
• /
• 2017

The Offshore drilling system of domestic drilling systems (drill rigs, drill ship) in Korea is dependent on full imports and the monopolistic situation of a few foreign large corporations is intensifying. In addition, most of domestic technology development tries to develop single product oriented products until now, but it is necessary to develop monitoring control system for package unit commercialization by approaching package development method. Therefore, we will develop a control monitoring system that can integrate the single equipment of the mud system developed previously.