• Computers and Concrete
• /
• 제17권3호
• /
• pp.305-322
• /
• 2016

The work is intended to demonstrate that the loss of bond between concrete and flexural steel which led in recent years a number of flat-slab structures to punching collapse under service loading conditions is also relevant to ultimate limit-state design. It is based on a comparative study of the results obtained from numerical experiments on flat slab-column sub-assemblages. The slabs were designed for punching either in compliance with the EC2 code requirements, which do not allow for such loss of bond, or in accordance with the compressive force-path method which considers the loss of bond between concrete and the flexural reinforcement in tension as the primary cause of punching. The numerical experiments are carried out through the use of a nonlinear finite element analysis package for which, although ample published evidence of its validity exists, additional proof of its suitability for the purposes of the present work is presented.

• International Journal of Aerospace System Engineering
• /
• 제3권2호
• /
• pp.31-37
• /
• 2016

STEP Cube Lab (Cube Laboratory for Space Technology Experimental Project) is a 1U standardized pico-class satellite. Its main mission objective is an on-orbit verification of five fundamental core space technologies. For assuring a successful missions of the STEP Cube Lab with five payloads, electrical power subsystem (EPS) shall sufficiently provide an electrical power to payloads and bus systems of the satellite during an entire mission life. In this study, a design process of EPS system was introduced including power budget analysis considering a mission orbit and various mission modes of the satellite. In conclusion, adequate EPS hardware in compliance with design requirements were selected. The effectiveness and mission capability of EPS architecture design were confirmed through an energy balance analysis (EBA).

• 한국동물위생학회지
• /
• 제33권4호
• /
• pp.393-399
• /
• 2010

We analyzed the HACCP prerequisite of National Veterinary Research and Quarantine Service (NVRQS) and the Food Establishment Inspection Report of US Food and Drug Administration (FDA) to recommend contents and ranges to be complemented and used for preparation of guidelines for more effective application of HACCP prerequisites. We used the HACCP inspection reports implemented by Korea Livestock Products HACCP Accreditation Service from 2007 to 2009, FDA Food Code 2009 Guide 3-B Instructions for Marking the Food Establishment Inspection Report, and Retail Food Establishment Sanitation Requirements of 410 Indiana Administrative Code. Major non-compliance items were open doors and windows, insanitary cleaning of in-use utensil, inadequate record of warehousing, and improper storage, transportation, and labelling. Hot water supply, personal hygiene, and regular product testing were additional week points which should be more strongly controlled by detailed operating guidelines. Also, current prerequisite items were required revision into more precise contents to enhanced the effective evaluation and practical application in meat markets.

• Toxicological Research
• /
• 제23권2호
• /
• pp.173-177
• /
• 2007

The GLP contains specific language concerning characterization of the test, control and reference substances used in toxicity studies. This paper will describe and discuss what types of documents are required to support test/reference substance characterization under GLP system. The purpose of this article is to present an overview of data needed in the characterization package that will adequately define the substance. Most sponsors use a certificate of analysis (COA) to communicate the test sub-stance characterization status information to the contracting research organizations. The COA should provide the test $material^{\circ}{\phi}s$ characterization results, substance storage requirements, expiration dates, verification of the collection of the retention sample, archival location of the data to support the characterization and GLP compliance status of the characterization.

• 시스템엔지니어링학술지
• /
• 제19권1호
• /
• pp.29-38
• /
• 2023

Independent Safety Assessment (ISA) is a third-party assessment that is to confirm that the system satisfies the safety requirements in the defined operational context. The process of this assessment often brings about many complex arguments that should be supported by evidence and justification. The communication between arguments and evidence is of the most importance in the context of safety case. This study illustrates how NOR-STA can be used for ISA process, showing the effective structure of safety compliance. The study outlines the steps to breaks down the top goal into many elements such as arguments, sub-goals, justification, context and assumptions. It concludes that the evidence-based safety conformance process utilizing NOR-STA provides a more effective and systematic representation of the independent safety assessment process in conformance cases.

• 한국군사과학기술학회지
• /
• 제16권3호
• /
• pp.268-276
• /
• 2013

The objective of this paper is to give a general understanding for the development flight test of Korean Utility Helicopter(KUH). This paper contains the contents of detailed flight test plan, the type of flight test, an introduction to main flight test area, and the overview of flight test results. At the beginning, more than 8,500 test points were identified for airworthiness certification to show the compliance for the KUH development requirements. However, the number of flight test points were optimized to 7,800 at the end. To accomplish the test objectives, about 860 flight test sorties had been performed, and more than 1,000 test sorties were consumed for trouble shooting. This paper also describes some major issues faced during development flight test phase.

• 무역상무연구
• /
• 제54권
• /
• pp.45-80
• /
• 2012

Since the 9.11 terror attack, the event which caused supply chain disruption, supply chain security has become more important than ever before. With this as a momentum, a customs supply chain security paradigm emerged intended to guarantee secure flow of cargo across boarder. Under this circumstances Incoterms(R) 2010 rules have allocated obligations between the buyer and seller to obtain or to render assistances in obtaining security clearances. Thus, security related obligations such as providing advance manifest information is the mandatory requirements for any export and import. The impact on the seller and buyer of security related obligations under the Incoterms(R) 2010 rules environment is obvious. Assistance to provide the security information in advance has become indispensable obligations to the seller and buyer. As such assistances is at the cost and risk of the party responsible for the clearances of the goods, the choice of recognised partner and compliance with the relevant security program, in order to enjoy the relevant benefits, becomes paramount.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1136-1141
• /
• 2008

The helicopter rotor system generates lift, thrust, maneuvering force and moment to the helicopter with the torque and pitch control force transferred from the main rotor hub/control. And the tail rotor system generates the thrust for yaw axis control of the helicopter with the torque and pitch control force transferred from the tail rotor hub/control. Ground whirl test shall be performed to verify the compliance of requirement performance test and dynamic test of rotor blade and hub/control. This paper describes a design of whirl tower test facility for helicopter rotor system test and evaluation. Design results are summarized and compared with design requirements.

• 시스템엔지니어링학술지
• /
• 제8권2호
• /
• pp.47-55
• /
• 2012

Tsunami disaster, which ruined Japan Fukushima nuclear power plant sites in 2011 March, has raised not only the perception of that Tsunami and/or large scale flooding possibly surpass the design baselines for industry facilities and plants, but also the necessity to establish recovery system against flooding. This study suggests the framework for flooding and drainage system in compliance with flooding and drainage concept to define and identify requirements, functions, and components of the system with traceable relations. The framework with combination to CMMI engineering process is the base of corresponding high level system design.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.360-364
• /
• 2006

Recently KS documents related to lightning protection were revised complying with the requirements of IEC standards. Lightning protection parts are divided three in IEC, those are arrestor(60099), SPD(61643), and protection facilities(62305). According as international standard is applicable in Korea, type tests, routine tests, and acceptance tests shall be made to demonstrate compliance with the relevant standards. KESRI have installed test equipment which is funded by Ministry of Commerce, Industry and Energy fit for lightning surge test form 2002, and we introduce the test equipments in detail.