• Journal of Biosystems Engineering
• /
• 제24권2호
• /
• pp.153-158
• /
• 1999

As a basic research for the development of the automatic grading and sorting system for dried oak mushrooms, the device to acquire both cap and gill side images of mushroom has been developed and neural network based side recognition and quality grading has been proposed via inputting both side images. 20 quality grades have been selected considering the requirement of grade classifications imposed by the mushroom company. Developed DC motor driven‘V’type reversing device for the image acquisition of both side images of mushroom showed more than 95% success. Most error was caused by very small size mushrooms with a radius of around 1cm. However, it required a further research to reduce the reversing time. Grading and side recognition were performed via inputting normalized size factors and average gray levels of $8{\times}8$ grids converted from the raw images of both surfaces to the multi-layer back propagation(BP) network. Accuracy of the grading showed about 88.5% and the total grading time including reversing operation was around 2 seconds.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.58-63
• /
• 2005

As fuel cells approach commercialization, hydrogen production becomes a critical step in the overall energy conversion pathway. Reforming is a process that produces a hydrogen-rich gas from hydrocarbon fuels. Hydrogen production via autothermal reforming (ATR) is particularly attractive for applications that demand a quick start-up and response time in a compact size. However, further research is required to optimize the performance of autothermal reformers and accurate models of reactor performance must be developed and validated. The design includes the requirement of accommodating a wide range of experimental set ups. Factors considered in the design of the reformer are capability to use multiple fuels, ability to vary stoichiometry, precise temperature and pressure control, implementation of enhancement methods, capability to implement variable catalyst positions and catalyst arrangement, ability to monitor and change reactant mixing, and proper implementation of data acquisition. A model of the system was first developed in order to calculate flowrates, heating, space velocity, and other important parameters needed to select the hardware that comprises the reformer. Predicted performance will be compared to actual data once the reformer construction is completed. This comparison will quantify the accuracy of the model and should point to areas where further model development is required. The end result will be a research tool that allows engineers to optimize hydrogen production via autothermal reformation.

• 한국통신학회논문지
• /
• 제40권5호
• /
• pp.815-825
• /
• 2015

DNP3는 SCADA 시스템의 대표적인 프로토콜 중 하나이다. IEC 62351에서는 기밀성, 무결성, 가용성, 부인방지 책임추적성을 보안 요구사항으로 들고 있다. 하지만 DNP3 표준인 IEEE Std. 1815에서는 부인방지 책임추적성에 대한 메커니즘을 정의하고 있지 않다. 이에 본 논문에서는 DNP3의 발신자 부인방지 기법을 제안하고, OpenSSL과 스카다시스템 라이브러리를 이용하여 DNP3 발신 부인방지를 구현한다.

• 한국항공운항학회지
• /
• 제25권3호
• /
• pp.115-122
• /
• 2017

To achieve designed quality and reliability from R&D to force integration, an establishment of precise and distinct specifications and standards are required. However, the recent process of R&D standardization on defense acquisition system, has brought plenty of corrections on specifications and standards that may cause not only difficulties to production line and retardation to the military forces, but also a degradation of provided weapon systems. Therefore, a technical review should be performed by the developer, the producer, and the client, establishing the standard that include mass production requirements as well as clients' requirements. This paper propose a specified solution on process of R&D standardization, by applying a substantial FCA(Functional Configuration Audit) and PCA(Physical Configuration Audit) which implies participation of related agencies. By the improved PCA, 2,023 corrections on 74 types of QAR(Quality Assurance Requirement)s and 12,715 corrections on drawings are identified.

• 산업공학
• /
• 제23권3호
• /
• pp.221-228
• /
• 2010

With the development of science and technology, modern submarines are equipped with high technology devices and multi-functioned precise armaments, consequently, acquisition cost as well as maintenance cost of the submarines are getting higher and higher. However, tight defense budget forces navy to significantly reduce military operating and maintenance costs. In this study, the maintenance and operating costs of submarine Jangbogo-II are estimated through M&S (Modeling and simulation) methodologies in order to reasonably and consistently work out the requirement verification system of Jangbogo-II. The maintenance and operating costs of Jangbogo-II along the next 25 years are estimated as 312.65 billion won via engineering analysis methods while 312.69 billion won from PRICE Model, which shows only 0.04 billion won differences as a whole. This study is expected to be able to provide meaningful decision making data for not only short and/or mid term operating planning but military budgeting.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.735-741
• /
• 2003

A simplified view of array design and application process was introduced. Array design is critical to achieve a successful phased array measurements. A planar microphone array is designed to produce optimum performance and also to fit economic requirement in integrating data acquisition system. Certain performance characteristics are of primary concern when designing arrays. These characteristics include array resolution, spatial aliasing and array sidelobe suppression. Every array has its directional pattern that shows such characteristics. Assuming that a monopole source is located in center, beam-patterns have been simulated varying measurement conditions such as number of sensors. array aperture size, distance between array and source, frequency of interest and so on. Sensor correction was conducted on very channel using magnitudes and phased of FRF with respect to a reference microphone channel. Then with a spiral type array, measurements have been made with two point sources of same frequency in order to investigate array resolving abilities. It is observed that higher frequency source achieves better resolution than lower one does.

• Tribology and Lubricants
• /
• 제40권1호
• /
• pp.24-27
• /
• 2024

A monotype valve body for a dual clutch transmission has the potential to reduce costs, weight, and manufacturing time by modularizing various parts, including those of existing solenoid packs and valve bodies, into one through the application of super-precision die casting technology. However, this approach may lead to challenges such as reduced rigidity and increased interference due to modularization and compactness, impacting both product performance due to the reduced weight as well as durability and reliability. Unlike existing products, this approach requires a high-precision thin-wall block to avoid more complicated flow line formation, interference between flow lines, and leaks, as well as a strict quality requirement standard and precise inspections including detection of internal defects. To conduct precise inspections, we built an equivalent model corresponding to a driving distance of 300,000 km. Testing involved simulating actual road loads using a real vehicle and a chassis dynamometer in the FTP-75 mode (EPA Federal Test Procedure). The aim of the study was to establish a vehicle load-based part durability model for manufacturing a mono-type valve body and to develop fundamental technology for part weight reduction through preliminary design by introducing analytical weight reduction technology based on the derived results.

• 품질경영학회지
• /
• 제40권3호
• /
• pp.286-294
• /
• 2012

Purpose: In this study, we propose the ESS process model which, in order to improve reliability of electronic equipment, can be referenced in both development and production phases. Methods: ESS guidelines such as MIL handbooks or private sector ESS guidelines are used for devising the proposed ESS model. Especially, proposed model is customized by using those references in order to be optimized in the domestic development and production phases. Results: ESS-related-requirements which is specified in the Technical Data Package(TDP) for the area of guided missile systems are analyzed. Current status of the requirement and screening strength are analyzed for those systems to show what kind of weak points should be improved. Conclusion: A ESS guideline which is applicable to the domestic weapon acquisition environment is proposed. As such, the necessity and detail guidelines of the proposed model are explained.

• 한국시뮬레이션학회논문지
• /
• 제24권1호
• /
• pp.25-34
• /
• 2015

무기체계의 합리적인 요구사항 도출을 위해서는 많은 경험과 시행착오가 필요하지만, 현실적으로는 개발 비용과 위험 등의 이유로 M&S를 통한 접근이 일반적이다. 무기체계 획득 이외에도, 개발된 무기체계의 분석 또는 훈련을 목적으로도 M&S가 광범위하게 사용되고 있다. 국방과학연구소에서는 이러한 M&S의 필요성을 충족시키기 위해 모의실험 및 체계분석 구현에 필요한 M&S 공통기반기술 제공을 목적으로 해군 전투실험을 위한 DEVS 통합개발환경(QUEST)을 개발하였다. 본 논문에서는 모의 어뢰 표적탐지부 연동 아키텍처를 설계하고, QUEST의 무기체계 시뮬레이션 기능을 활용하여 모의 어뢰 표적탐지부 연동장비를 개발하였다. 모의 어뢰 표적탐지부 연동장비는 표적탐지 결과를 제공하는 어뢰 표적탐지부와 어뢰 표적탐지부의 성능 시험에서 필요한 시뮬레이션 시나리오를 제공하는 QUEST 시나리오 발생기로 구성된다. 모의 어뢰 표적탐지부 연동 아키텍처는 QUEST 시나리오 발생기와 어뢰 표적탐지부와의 연동을 통해 어뢰 표적탐지부의 성능 및 인터페이스를 검증할 수 있도록 설계되었다.

• 한국산학기술학회논문지
• /
• 제19권2호
• /
• pp.117-124
• /
• 2018

본 논문은 KM-SAM 다기능레이더용 축류형 송풍기에 대한 국산화 개발 내용을 서술하고 있다. KM-SAM 다기능레이더는 중/저고도 위협표적을 탐지 및 추적하는 핵심 장비로 지속적인 외부 환경의 영향을 받는다. 이러한 장비의 원활한 운용을 위해서는 내부 온도 및 습기를 조절하는 송풍기가 필수적이며, 현재까지 다기능레이더용 송풍기는 전량 해외업체 수입에 의존하고 있다. 이러한 문제점 해결을 위해 국산화 개발 연구가 제안되었으며, 국산화 개발은 원제작사와 체계장비 규격 등 관련 기술자료 검토를 통한 요구도 분석, 시제품 설계, 성능시험 및 환경시험을 통한 설계요구조건 검증 등을 포함한다. 송풍기는 가이드 베인이 있는 축류형 팬으로 구성되고 모터는 최대 970 CFM의 풍량과 4.8 IWG 풍압을 발생하도록 제작되었다. 또한 신뢰성 있는 데이터 획득을 위해 AC 전원 공급기, 팬 성능시험기 및 데이터 수집 장비를 구축하여 시험평가를 수행하였으며, 시제품 모두 수입품 대비 동등수준 이상의 설계 요구도 검증이 이루어졌다.