• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.1982-1990
• /
• 2022

The purpose of this study was to verify the possibility of fuel rod pattern analysis in a fresh fuel assembly using the Yonsei single-photon emission computed tomography (YSECT) system. The YSECT system consisted of three main parts: four trapezoidal-shaped bismuth germanate scintillator-based 64-channel detectors, a semiconductor-based multi-channel data acquisition system, and a rotary stage. In order to assess the performance of the prototype YSECT, tomographic images were obtained for three representative fuel rod patterns in the 6 × 6 array using two representative image-reconstruction algorithms. The fuel-rod patterns were then assessed using an in-house fuel rod pattern analysis algorithm. In the experimental results, the single-directional projection images for those three fuel-rod patterns well discriminated each fuel-rod location, showing a Gaussian-peak-shaped projection for a single 10 mm-diameter fuel rod with 12.1 mm full-width at half maximum. Finally, we successfully verified the possibility of the fuel rod pattern analysis for all three patterns of fresh fuel rods with the tomographic images obtained by the rotational YSECT system.

• 한국의류산업학회지
• /
• 제7권2호
• /
• pp.169-178
• /
• 2005

This study was aimed at investigating the relationship between the sensibility image of Dangcho pattern and the pattern composition variables(representation type, pattern arrangement, object of application, desire of purchase, ages). The results obtained are as follows: The sensibility image which is derived from Dangcho pattern was investigated in the property of five dimensions, that is, the property of fascination, elegance, high grade, uniqueness, and correctness. The sensibility image of Dangcho pattern was the significant main effect according to pattern composition variables(representation type, pattern arrangement, object of application, desire of purchase, ages), and was the significant collation effect between each of pattern composition variables. The sensibility image of the Dangcho pattern which had most an influence on degree of preference and desire of purchase was examined by the property of fascination.

• 한국의상디자인학회지
• /
• 제11권2호
• /
• pp.143-151
• /
• 2009

Ukiyo-e is the representative genre-painting of Japan, dominant during the 17th century Edo-Period (1503-1867). Ukiyo-e is mainly focused on expressing the lives of geishas, sumo wrestlers, and kabuki characters, who were the center of the Japanese amusement culture, and gained popular acceptance in Europe when it was first introduced in the late 19th century in the form of Japonism, having significant influence and impact on the impressionist artists of the time and on the design of western cloths. In this papers, we will be primarily conducting a historical study on the development of the Ukiyo-e, a representative genre-painting of Japan, and conduct a in-depth analysis of pattern expressed in the Kosode of women, represented through various different works of art. In order to conduct a thorough analysis of pattern expressed in Ukiyo-e, we collected over 255 pieces of materials from existing foreign paintings as well as museums in the National Museum of Tokyo, Edo Museum, and the Harajuku Museum of Ukiyo-e. This papers seeks to analyze and classify patterns expressed in the works of Ukiyo-e and research the characteristics express in the pattern to contribute to the development of fabrics in the modern fashion design industry.

• 동의생리병리학회지
• /
• 제36권3호
• /
• pp.94-99
• /
• 2022

The discovery of biomarkers related to pattern identification (PI), the core diagnostic theory of Korean medicine (KM), is one of the methods that can provide objective and reliable evidence by applying PI to clinical practice. In this study, 40 diabetic patients and 41 healthy control subjects recruited from the Korean medicine clinic were examined to determine the human electrical response related to the deficiency pattern, a representative pattern of diabetes. Qi-Blood-Yin-Yang deficiency pattern scores, which are representative deficiency patterns for diabetes mellitus, were obtained through a questionnaire with verified reliability and validity, and the human electrical response was measured non-invasively using a bioimpedance meter. In ANCOVA analysis using gender as a covariate, the 5 kHz frequency resistance and 5-250 kHz frequency reactance were significantly lower in the diabetic group than in non-diabetic control group. In addition, the multiple regression analysis showed a positive correlation (R2=0.11~0.19) between the Yang deficiency pattern score and resistance value for the diabetic group; the correlation was higher at higher frequencies of 50kHz (R2=0.18) and 250kHz (R2=0.19) compared to 5kHz(R2=0.11). In contrast, there was no such significant association in the control group. It implies that bioimpedance resistance measured at finite frequencies may be useful in predicting Yang deficiency, which is closely related to diabetic complications by reflecting the decrease in body water content and metabolism. In the future, large-scale planned clinical studies will be needed to identify biomarkers associated with different types of PI in diabetes.

• 한국의류산업학회지
• /
• 제17권3호
• /
• pp.447-461
• /
• 2015

The purpose of this study is to develop a torso pattern that is highly representative for the proper body shape of women in their thirties. Size data of the women with age of 30 through 39 from the database of Size Korea 2004 were used for the study. In order to develop a master pattern which will be used as the benchmark for grading of research group, 4 existing torso block drafting methods were compared based on the data gathered and the block with the highest evaluation score was utilized as a reference point. For the analysis, data was divided into four types, only the data of 138 subjects which were evaluated at least by four or more experts as valid were used for the study. The major results can be summarized as follow. The women of bust girth of 91cm and height of 160cm which was turned out to be representative type of research group were used as standard measurement for the purpose of reflecting not only curve length of the 3D analysis measurement but also the difference between front and back thickness to the pattern. Dart locations were set based on front and back torso ease, shoulder area revisions, front sagging length 1.5cm and cross section crevice length analysis. According to the experts' appearance evaluation of the pattern was found to be better than the control pattern which was regarded as the best among 4 patterns created based on existing torso block drafting methods.

• 한국식생활문화학회지
• /
• 제12권4호
• /
• pp.365-374
• /
• 1997

Due to the continuous change of socio-economic circumstances and dietary pattern, the need to change recommended dietary allowances and the basic food groups has been required. Consequently, there have been six revisions of the Korea RDAs, the national recommanded dietary allowances. I reviewed the six sequences of revisions concerning the basic food groups. Up to the fifth revision, the ranks of the basic food groups were based upon the dietary needs of the people of the perspective era. However, in the sixth revision, there was no rank associated with the food groups, but the food groups were portrayed in a food composition tower that explained their importance and their necessary consumption amounts. I could indirectly observe the dietary pattern of each era by analyzing the basic food groups and the representative foods of each food group. I also studied information of pictorial representations of the basic food groups and compared the items of the representative foods with nutrient analysis table. By observing nutrient analysis table, I analyzed whether the clarified representative foods of the basic food groups are indeed foods that were eaten frequently by people daily.

• 한국도로학회논문집
• /
• 제17권4호
• /
• pp.1-9
• /
• 2015

PURPOSES : The purpose of this study is to revise the weight to power ratio of the representative truck in S. Korea. So far, S. Korea has been using the unit lb/hp, and the construction machines were not considered in the evaluation of the performance of trucks. METHODS : This study was performed to recommend the use of ISO system of units, and to analyze the weight to power ratios of the representative trucks in S. Korea, including the dump trucks, concrete mixer trucks, and asphalt and concrete diffusers. RESULTS: From this study, the 85 percentile value of the weight to power ratio of the trucks in S. Korea's was found to be 103.6 kg/kw. CONCLUSIONS : The performance standard for the representative truck has to be increased upward, considering the travel pattern of the dump trucks, concrete mixers, and asphalt and concrete diffuser trucks, travel distances, narrow area (work zone) of operation, and the saving in construction budget for climbing lane. Based on this study, the weight to power ratio of the representative truck in S. Korea could possibly be revised to 100~110 kg/kW.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.78-81
• /
• 2002

Printed Circuit Boards for satellite are composed of multi-layered copper plate and glass epoxy. Each copper layer have the complicated and different pattern to operate correctly for its mission. Especially. copper layer give effect on the PCB stiffness seriously. But It can make more complicate to predict the exact stiffness of PCB. In KOMPSAT-2 program, too many type of PCB are used for each electronic unit, and they have different type of pattern of copper layer. Solar array regulator has two type of PCB and it will be considered for this study. In this study. we calculate the PCB board stiffness of KOMPSAT-2 SAR unit considering the concept of simplified representative volume element. It will be correlated with the test results under KOMPSAT-2 vibration environmental condition to increase the reliability of this study.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2005년도 추계 종합학술대회 논문집
• /
• pp.659-663
• /
• 2005

기존의 디자인패턴도구에서는 디자인패턴을 정형화된 방법으로 표현하고 설계할 수 없었으므로, 설계정보에 디자인패턴이 재사용 될 때 중복적으로 설계정보가 표현되었다. 그리고 정형화된 디자인패턴은 설계자의 의도에 맞도록 확장 가능하여야 하며, 설계자의 설계의도에 따라 객체를 표현할 수 있어야 한다. 따라서 본 논문에서는 디자인패턴을 정형화하기 위한 메타모델로 XMI를 이용하여 정의하는 방법과 메타모델로 표현된 디자인패턴을 확장하기 위한 메타모델을 표현할 수 있도록 하였다.

• 한국의류학회지
• /
• 제30권5호
• /
• pp.722-732
• /
• 2006

The pattern making of the tight-fitting collars which often used in diving suits, dance wear, or cycle wear has not been fully established. To develop tight-fitting collar pattern directly from 3D images from the representative somatotypes, dressforms developed by Jaeun Jung were used. The 3D scan data of the four male dressforms were obtained using Exyma-1200. Triangle Simplification and the Runge-Kutta method were applied to reduce the 3D scan data points and to make the segmented triangular patches in a plane from 3D data. As results, apparent differences between the tight-fitting collar patterns obtained from the 3D scan data and the ordinary 2D collar patterns were found around the center back line. The curvatures of the center back line were higher in all types of the tight-fitting collar than in the ordinary collar pattern. Relative differences in the shape of collar lines among four representative Korean men were reported. To fit the curved shape of the back neckline, 1.8 cm should be reduced from the upper neckline in average. We suggested the direct pattern making method for the 2D tight-fitting collar patterns considering the 3D shape of various types of men's dressform.