• Journal of KIBIM
• /
• v.13 no.2
• /
• pp.16-28
• /
• 2023

The concept of the Metaverse has been around not only for play but also for daily use. The interest in Metaverse is increasing, and various industries such as medicine, media, and financial started to use the new technology for diverse purposes. In addition, interest in the Metaverse is increasing in the architectural industry, but not much research has been done yet. Recently, some studies started to study focusing on the architectural design of Metaverse and the technological characteristics of Metaverse. However, there are limited studies about the utilization of the Metaverse in the architectural design process or construction process. From this perspective, the study aims to analyze the applicability of the Metaverse in the architectural design process through Metaverse case studies. In order to accomplish the research goal, the study classified user experience and technology of Metaverse in the literature review and Metaverse use in other industries such as commercial, medical, media entertainment, and construction industry. Then, this study analyzes six representative Metaverse platforms according to the application of Metaverse in the architectural design process. Finally, this study discussed the future direction and potential of Metaverse application in the Architectural design process.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.234-235
• /
• 2021

We set the representative balcony types of the existed building to two types: unexpanded balcony and extended balcony, and analyze the effect of reducing the cooling and heating energy load when applying remodeling. The scope of the study was limited to balcony walls, including window-wall junctions, and was conducted by comparing cases with and without thermal break insulation structures for a clear conclusion. The study was conducted using the equivalent U-value in each case. The equivalent U-value was calculated by deriving through 2 dimensional steady-state heat transfer analysis of each case balcony envelope. And building energy was calculated using the derived equivalent U-value. According to the calculation results, for unexpanded balconies, the equivalent U-value was reduced by about 80%, and the heating and cooling load was reduced by about 20%. In the case of extended balconies, the equivalent U-value was reduced by about 57% and the resulting heating and cooling load was reduced by about 12%.

• Journal of Internet Computing and Services
• /
• v.18 no.2
• /
• pp.61-73
• /
• 2017

In this paper, we propose a Documents Cluster Labeling method using information content of words in clusters to understand what the clusters imply. To do so, we calculate the weight and frequency of the words. These two measures are used to determine the weight among the words in the cluster. As a nest step, we identify the candidate labels using the WordNet. At this time, the candidate labels are matched to least common hypernym of the words in the cluster. Finally, the representative labels are determined with respect to information content of the words and the weight of the words. To prove the superiority of our method, we perform the heuristic experiment using two kinds of measures, named the suitability of the candidate label ($Suitability_{cl}$) and the appropriacy of representative label ($Appropriacy_{rl}$). In applying the method proposed in this research, in case of suitability of the candidate label, it decreases slightly compared with existing methods, but the computational cost is about 20% of the conventional methods. And we confirmed that appropriacy of the representative label is better results than the existing methods. As a result, it is expected to help data analysts to interpret the document cluster easier.

• Journal of Korea Water Resources Association
• /
• v.40 no.2 s.175
• /
• pp.159-170
• /
• 2007

This study evaluated the parameters of Clark unit hydrograph (UH) estimated using the rainfall-runoff measurements and evaluated their variability. This also includes the quantification of basin and meteorological factors using probability density functions, selection of storm events with mean affecting factors, and derivation of average parameters of the Clark UH from storm events selected. Summarizing the results from this procedure are as follows. (1) It is not easy to avoid much uncertainty on the decision of runoff characteristics (that is, the concentration time and storage coefficient) even with some rainfall-runoff events are available. (2) As the distribution function of concentration time is very skewed, a simple arithmetic mean may lead a biased estimate. That is, the arithmetic mean based on the normal distribution can not be representative anymore. The mode may well be the representative in this case. On the other hand, the storage coefficient shows a symmetric distribution function, so the arithmetic mean may be used use for its representative. For the basin in this study, the concentration time in this study is estimated to be about 7 hours, and the storage coefficient about 22 hours.

• Journal of Korea Water Resources Association
• /
• v.55 no.11
• /
• pp.979-989
• /
• 2022

In hydrological surveys, observation through representative location is essential due to temporal and spatial limitations and constraints. Regarding the use of hydrological data and the accuracy of the data, there are still insufficient observatories to be used in a specific watershed. In addition, since there is virtually no standard for the location of the current evapotranspiration, this study proposes a method for determining the location of the evapotranspiration. To determining the location of evapotranspiration, a grid is selected in consideration of the operating range of the Flux Tower using the eddy covariance measurement method, which is mainly used to measure evapotranspiration. The grid of representative location was calculated using the factors affecting evapotranspiration and satellite data of evapotranspiration. The grid of representative location was classified as good, fair, and poor. As a result, the number of good grids calculated was 54. It is judged that the classification of the grid has been achieved regarding topography and land use as a characteristic that appeared in the classification of the grid. In particular, in the case of elevation or city area, there was a large deviation, and the calculated good grid was judged to be a group between the two distributions.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.1
• /
• pp.173-191
• /
• 2002

The purpose of this study was defined efficient throw motion pattern to obtain the quantitative data and to achieve successful bowling through kinetic - kinematic variables on the throw motion. Subject of group composed of three groups : Higher bowlers who are two representative bowlers with 200 average points and one pro-bowler. Middle bowlers who are three common persons with 170 average points. Lower bowler who are three common persons with 150 average points. Motion analysis on throw motion in three groups respectively has been made through three-dimension cinematography using DLT method. Two high-speed video camera at operating 180 frame per secondary. One-way ANOVA has been used to define variable relations. Analyzed result and conclusion are the following : The displacement of back of the hand must have wider difference of each right-left displacement to increase the spin of the ball. In high bowlers group, difference between the front-rear position of back of the hand in case of success and that in case of failure in follow throw is 0.17m. That is to say, momentum in case of success come to increase greatly, compared with that in case of failure. To increase the spin of the ball, the potential difference should be narrower in follow through. In case of the high bowlers, the velocity of the front-rear direction of the back of the hand has been the fastest both in release and follow through, compared with those in other groups, which has contributed to increasing the spin force of the ball. The orders in the resultant velocity of the back of the hand has shown the this : the finger tip$\rightarrow$the back of the hand$\rightarrow$wrist.These orders made the proximal segment support the distal segment. The distal segment has provided the condition to accelerate the velocity. In case of failure, the suddenly increased velocity has caused the failure in the follow through. Acutely flexing the angle of the back of the hand has contributed to lifting to increase the spin of the ball.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.456-459
• /
• 2011

Among the various activated carbons available in the market, an optimum mixing method of two kind activated carbons with different adsorbability was investigated in this study. The representative adsorption behaviors of the activated carbon are the adsorption isotherm plots obtained by the BET-Analysis which suggests also basic information of adsorption filter design. So we have tested three cases with certifications, the one was the extreme case of coal cokes based activated carbon with highest BET-model and coconut-shell based activated carbon with the lowest Langmuir-model, the other middle and cross case were applied this method to two kinds of activated carbons with higher and lower specific surface areas which are not available but supplied as research samples by an authority of an Korean Research Institute.

• Korean Chemical Engineering Research
• /
• v.54 no.4
• /
• pp.582-585
• /
• 2016

This study intends to provide initial evacuation distances for the public in case of accidental releases of hydrogen fluoride (HF). HF is a very toxic chemical that is widely used in the chemical, electrical, and electronics industries. Consequence modeling programs, such as ALOHA and PHAST, were used to help formulate a contingency plan in case of an HF leak. For the purpose of this study, the release of entire quantity of HF in 10 min is defined as a worst-case scenario and the release from a partial line rupture is used as an alternative case scenario as National Institute of Chemical Safety (NICS) guidelines. Once the discharge rates were calculated based on the scenarios, the ERPG-2 endpoint distances have been obtained for representative daytime and nighttime weather conditions. This paper presents graphs that can be used to enact swift evacuation orders and emergency response plans in the case of accidental releases of HF.

• Journal of the Korean Geographical Society
• /
• v.45 no.6
• /
• pp.820-844
• /
• 2010

This study investigates the effect of GIS-integrated lessons on spatial thinking abilities and geographical skills using discourse analysis along with a comparative three-case case study method. A series of curricula were designed and implemented in an 8th grade classroom for a semester. The data collected consist of the dialogue transcripts of six consecutive GIS-integrated lessons. The transcripts were analyzed to identify the moves (speech acts) used by each student and to classify discourse content of spatial thinking and geographical skills. Based on three individual case studies, a cross-case study was performed to uncover any relationship between the phenomenon and the contexts. The empirical evidence from discourse analysis demonstrated that students were able to generate appropriate terms representative of spatial thinking and geographical skills although students appeared to possess primarily lower-order spatial abilities, followed by a moderate-level of spatial abilities. Considering that the unit was implemented in a biology class rather than a geography class the result reflected the fact that the student's spatial thinking and geographical skills were attributable to the GIS-integrated lessons. Thus, the results have a great implication for GIS-integrated lessons and geography education as an innovative tool for improving student's spatial thinking and geographical skills.

• Journal of KIISE:Software and Applications
• /
• v.31 no.7
• /
• pp.929-938
• /
• 2004

This paper proposes a pose-invariant face recognition method using cylindrical model and stereo camera. We divided this paper into two parts. One is single input image case, the other is stereo input image case. In single input image case, we normalized a face's yaw pose using cylindrical model, and in stereo input image case, we normalized a face's pitch pose using cylindrical model with previously estimated pitch pose angle by the stereo geometry. Also, since we have an advantage that we can utilize two images acquired at the same time, we can increase overall recognition performance by decision-level fusion. Through representative experiments, we achieved an increased recognition rate from 61.43% to 94.76% by the yaw pose transform, and the recognition rate with the proposed method achieves as good as that of the more complicated 3D face model. Also, by using stereo camera system we achieved an increased recognition rate 5.24% more for the case of upper face pose, and 3.34% more by decision-level fusion.