• International Journal of Highway Engineering
• /
• v.17 no.4
• /
• pp.1-9
• /
• 2015

PURPOSES : The purpose of this study is to revise the weight to power ratio of the representative truck in S. Korea. So far, S. Korea has been using the unit lb/hp, and the construction machines were not considered in the evaluation of the performance of trucks. METHODS : This study was performed to recommend the use of ISO system of units, and to analyze the weight to power ratios of the representative trucks in S. Korea, including the dump trucks, concrete mixer trucks, and asphalt and concrete diffusers. RESULTS: From this study, the 85 percentile value of the weight to power ratio of the trucks in S. Korea's was found to be 103.6 kg/kw. CONCLUSIONS : The performance standard for the representative truck has to be increased upward, considering the travel pattern of the dump trucks, concrete mixers, and asphalt and concrete diffuser trucks, travel distances, narrow area (work zone) of operation, and the saving in construction budget for climbing lane. Based on this study, the weight to power ratio of the representative truck in S. Korea could possibly be revised to 100~110 kg/kW.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.175-184
• /
• 2009

The study analyzes likely impacts of left truck lane restriction strategies on urban freeways based on a traffic simulation model. This study contains two main parts. The first part is performed to develop feasible alternatives as well as provide insights into conditions under left truck lane restrictions would be effective based on the analysis of two representative hypothetical highways. Different levels of O-D demands and truck percentage is at least restrictions would work when maximum rate of flow is more than 1,300vphpl or truck percentage is at least over loft of the total traffic. The second part of our study concerns a case study on a region with perhaps the highest truck volumes in the U.S. - a northbound section of Interstate 710 corridor in Los Angeles County, Southern California. The results show that restricting the two leftmost lanes under congested traffic with heavy ruck use, provides the most positive impacts in terms of improving the flow of traffic and saving fuel. In addition, our study demonstrates that in general, the number of lanes restricted is a crucial factor in the success of this strategy.

• International Journal of Advanced Culture Technology
• /
• v.9 no.1
• /
• pp.224-241
• /
• 2021

According to data from the National Police Agency, 75.5 percent of dead traffic accidents in Korea are truck accidents. About 1,000 people die in cargo truck accidents in Korea every year, and two to three people die in cargo truck accidents every day. In the survey, Korean cargo workers answer poor working conditions as an important cause of constant truck accidents. COVID 19 is increasing demand for non-face-to-face logistics. The inefficiency of the Korean transportation system is leading to excessive work burden for small logistics The inefficiency of the Korean transportation system is causing excessive work burden for small individual carriers. The inefficiency of the Korean transportation system is also evidenced by the number of deaths from logistics industry disasters that have risen sharply since 2020. Small and medium-sized Korean Enterprises located in CIPs (Connected Industrial Parks) often do not have smart access certification systems. And as a result, a lot of transportation time is wasted at the final destination stage. In the logistics industry, time is the cost and time is the revenue. The logistics industry is the representative industry in which time becomes money. The smart access authentication system architecture proposed in this paper allows small logistics private carriers to improve legal stability, and SMEs (Small and Medium-sized Enterprises) in CIPs to reduce logistics transit time. The CIPs smart access system proposed in this paper utilizes the currently active Mobile OTP (One Time Password), which can significantly reduce system design costs, significantly reduce the data capacity burden on individual cell phone terminals, and improve the response speed of individual cell phone terminals. It is also compatible with the OTP system, which was previously used in various ways, and the system reliability through the long period of use of the OTP system is also high. User customers can understand OTP access systems more easily than other smart access systems.

• Journal of Korean Society of Transportation
• /
• v.25 no.5
• /
• pp.79-90
• /
• 2007

In determining vertical grades in highway alignment design, engineers usually consider heavy vehicle performances on the upgrade. Heavy vehicles usually experience speed reduction on the upgrade and with recent years weight/horsepower improvements for heavy vehicles the speed reduction shows some change. However, in spite of the weight to horsepower improvements for the design vehicles from 300lb/HP to 200lb/HP in the AASHTO, there was no change in the maximum vertical grades. Therefore, a review of the maximum vertical grade reflecting existing heavy vehicle performances is required. In particular, in South Korea where highways pass through lots of mountaineous terrain, the maximum vertical grades must be reviewed throughly. In this study the amount of heavy vehicle performances during past decades were investigated and their expected impacts on highway vertical alignment designs were subsequently analyzed. A worldwide terrain analysis and international design standards were compared to set South Korean vertical grade standards. Traffic flow simulation Vissim was utilized to simulate vehicular flows on the upgrade and new truck performance curves on the grades were developed. Based on the new curve, it was decided that $1{\sim}2%$ increase of the maximum vertical grades could be allowed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.03a
• /
• pp.21-30
• /
• 2002

Busan Port which is the representative social overhead capital facilities for international trade of goods has been the driving force for economic development in Korea. Therefore, the central government should play the major role in building a rear road to Busan Port in order that it may function as a mojor port of Northeastern Asia through the systemization of mutual assistance among connected facilities, completely equipped with port-related facilities befitting to the principal port of imports and exports. In this study, the validity of container tax is being examined, analyzing container tax which Is considered as an obstacle to the development of Busan Port and its purpose, and grasping the present conditions by the realistic speculation on container tax issues and its abolition. First, the port rear road as a social overhead capital facilities, which connects port and expressway, should be considered as part of port, and port is social overhead capital invested by government. Second, the susan City imposes on container tax. As a result, a shipper and a shipping company are paying a double charge by paying container tax with port dues. Third, someone argues that port rear road is constructed as container truck generates much traffic, but it is unreasonable to conclude that container truck is seed of traffic jam because according to traffic survey of Busan City, container truck occupies only 1.45% of total traffic Forth, it has bad influence upon the competitiveness of Busan Port as Northeastern logistics base, as other ports who are competing with Busan Port like Singapore. Hong kong, Kobe make their competitiveness strong by decreasing the cost of pore dues

• Journal of Navigation and Port Research
• /
• v.46 no.3
• /
• pp.236-242
• /
• 2022

Busan Port is operated separately by a number of terminal operators, resulting in a large number of ITT (Inter-Terminal Transportation) volumes. The occurrence of ITT volume causes various problems such as additional transportation cost, empty truck trips, truck delays and terminal congestion, weakening Busan Port's competitiveness. Among them, the empty truck trip problem is a representative factor, that exacerbates the cost problem of the ITT operation at Busan Port. But the ITT backhaul rate at Busan Port remains low. To strengthen the transhipment competitiveness of Busan Port, it is necessary to increase the ITT backhaul rate. In this paper, to improve ITT backhaul rate, we present a mathematical model for maximizing backhaul transport using buffer space. And we analyzed the improving effects of backhaul transport using buffer space through experiments based on actual operating data.

• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.17-28
• /
• 2008

Favorable policies for freight vehicles (i.e., trucks), such as exclusive "Truck-ways," have been proposed, and at the same time restricted policies for freight vehicles have been suggested because transportation of goods by truck aggravates traffic congestion and environmental conditions in urban areas. This study discusses the limitations of assessment processes for freight vehicle route management systems which have been carried out from limited perspectives such as physical distribution efficiency and traffic circulation. The objective of this study is to propose an assessment method of truck route management systems in urban areas which includes more varied criteria. This research modified the two existing assessment indices of physical distribution efficiency and traffic circulation. In addition two new assessment indexes are proposed: (i) exposure indices for population directly influenced by nitrous oxide, a representative pollutant, and (ii) a friction index between trips for attending elementary school and freight vehicle trips. It was found that from the perspective of physical distribution efficiency and traffic circulation, the "before" alternative is better than "after". However, from the aspect of traffic safety and environmental impacts the "after" alternative is better than "before". It is expected that the proposed evaluation method in this study would be useful when identifying reasonable policies for truck route management in urban areas.

• Korean System Dynamics Review
• /
• v.11 no.1
• /
• pp.5-26
• /
• 2010

To revitalize the trucking market, many studies are being done but it still has a lot of problems such as imbalance between supply and demand, poor profit structure of truck owners, ect. Therefore, it aims to study what kinds of prerequisite are needed to solve these problems through analyzing system structure and mechanism of the market. To achieve it, System Dynamics methodology, appropriate to make a simulation model and analyze dynamics of the system, is utilized. To obtain an empirical research point of view, time series data related on trucking market-provided by The Korea Transport Institute-are used. In addition, interview with a local representative logistics company and a ICD(Inland Container Depot) operation company is performed to find out technical and functional supporting factors to solve the existing problems in the market.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1997.10a
• /
• pp.8-14
• /
• 1997

The dynamic responses of highway bridges are varying depending on the features of either traveling vehicles or bridges. In this study, the probabilistic characteristics of dynamic amplification factors of highway bridges due to traveling heavy vehicles have been examined through analytical simulation processes. The truck with tandem axle and tractor with semitrailer are selected as the representative heavy vehicles, which are modeled with three dimensional 7-DOF and 12-DOF models, respectively. The analytical results have been compared with the experimental results of dynamic loading tests and the validity of the analytical models has been examined. Parametric studies on the means and extreme values of amplification factors have been performed with various traffic conditions such as vehicle types, vehicle weights, surface profiles, vehicle velocity, etc.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.2019-2024
• /
• 2021

For evaluating the radiological safety of dismantled concrete, the process of disposal and recycling of the radioactive concrete generated during the dismantling of Kori Unit 1 is analyzed. Four scenarios are derived based on the analysis of the concrete recycling and disposal process, and the potential exposure to the workers and public during this process are calculated. VISIPLAN and RESRAD code are used for evaluating the dosages received by the workers and public in the following four scenarios: concrete inspection, transport of concrete by the truck driver, driving on a recycled concrete road, and public living near the landfilled concrete waste. Two worker exposure scenarios in the processing of concrete and two public exposure scenarios in recycling and disposal are considered; in all the scenarios, the exposure dose does not exceed the annual dose limit for each representative.