• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.27.1-27.9
• /
• 2016

Background: The objective of this study was to place bone graft materials in cranial defects in a rabbit model and compare their bone regenerating ability according to the size and density of demineralized dentin matrix (DDM). Methods: We selected nine healthy male rabbits that were raised under the same conditions and that weighed about 3 kg. Two circular defects 8 mm in diameter were created in each side of the cranium. The defects were grafted with DDM using four different particle sizes and densities: 0.1 mL of 0.25- to 1.0-mm particles (group 1); 0. 2 mL of 0.25- to 1.0-mm particles (group 2); 0.1 mL of 1.0- to 2.0-mm particles (group 3); and 0.2 mL of 1.0- to 2. 0-mm particles (group 4). After 2, 4, and 8 weeks, the rabbits were sacrificed, and bone samples were evaluated by means of histologic, histomorphometric, and quantitative RT-PCR analysis. Results: In group 1, osteoblast activity and bone formation were greater than in the other three groups on histological examination. In groups 2, 3, and 4, dense connective tissue was seen around original bone even after 8 weeks. Histomorphometric analysis of representative sections in group 1 showed a higher rate of new bone formation, but the difference from the other groups was not statistically significant. RT-PCR analysis indicated a correlation between bone formation and protein (osteonectin and osteopontin) expression. Conclusions: DDM with a space between particles of $200{\mu}m$ was effective in bone formation, suggesting that materials with a small particle size could reasonably be used for bone grafting.

• 상하수도학회지
• /
• 제22권3호
• /
• pp.281-288
• /
• 2008

Cake resistance is influenced by floc size deposited on membrane surface. Enlarging floc size can reduce cake resistance. The small particles are enlarged by coagulation and flocculation process in conventional mixing tank at membrane filtration system. Fully-grown flocs for reducing the cake resistance, however, are ruptured while passing through a pump. In light of this fact, this study aims to experimentally look at the reaggregation phenomenon of mixing system. In addition, reaggregation phenomenon of mixing system is compared with first-aggregation of in-line injection system in which coagulant is injected just before a pump. These results suggest that first-aggregation of in-line injection system is better than reaggregation of mixing system for G-value above $3100sec^{-1}$. Since G-value in pipe of actual membrane filtration system are usually larger than $3100sec^{-1}$. The performance of in-line injection system is expected to be better than the conventional mixing tank system.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권3호
• /
• pp.267-273
• /
• 1995

The differences in rumen particle pool size, passage rate and rumen degradability in sheep receiving three varieties of orchardgrass hay harvested at pre-heading (H1), early-bloom (H2) and late-bloom (H3) were investigated using four ruminal-cannulated wethers (68 kg) fed 1,300 g of the hay once a day. Representative samples of whole rumen contents were collected at different times after feeding and the quantities of rumen particle pools [large particle pool (LPP), retained on a $1,180{\mu}m$ sieve; small particle pool (SPP), retained on a 47 but passed a $1,180{\mu}m$ sieve; and soluble fraction (SOL), passed a $47{\mu}m$ sieve (SOL)] were determined by a wet-sieving technique. The fullowing results were obtained: 1) The dry weight of whole rumen contents were significantly lower (p < 0.05) for HI than for H2 or H3. The reduction rate of whole rumen contents was slightly but significantly greater for HI that, the other hay varieties. 2) The LPP disappearance rates were 26.2, 25.3 and 21.7 g DM/h for H1, H2 and H3, respectively, and no statistical differences were found among the hay varieties. Appreciable changes were not observed with SPP and SOL throughout measurements for all hay varieties; however the SPP was markedly greater (p <0.05) for H2 and ill than for HI, while SOL did not differ among hay varieties. 3) The SPP passage rate (g DM/h) and effective rumen degradability (%) for HI, H2 and ill were, respectively, 9.7, 56.6; 16.9, 42.3; and 18.0, 28.9. The ruminal tum-over rate for SPP appeared to be higher for HI than for the other hay varieties.

• 한국지반신소재학회논문집
• /
• 제6권1호
• /
• pp.33-38
• /
• 2007

연직배수재는 필터와 코어로 형성되며, 필터의 주요기능으로 첫째, 흙 입자의 유실을 방지할 수 있는 흙 보유성과 둘째, Clogging 또는 Blinding현상 발생 없이 간극수를 원활히 배출시키는 투수성을 갖추어야 한다. 상대적으로 투수성이 낮은 지반에서 미세입자로 인하여 필터의 투수성을 저하시키는 필터폐색(Clogging) 현상이 발생하는데 필터의 폐색현상(Clogging)이 점진적으로 증가하면, 간극수의 흐름을 저하시켜 결국 압밀지연을 초래한다. 지반-필터의 거동에 따른 설계(시방)기준은 토목섬유 필터의 간극크기와 흙의 입도의 상관관계에 의해 결정되어야 하나, 국내에서는 필터폐색(Clogging)현상과 지반-필터의 거동 분석 없이 필터재의 유효입경(AOS, Apparent Opening Size)만을 고려하여 필터의 설계(시방)기준을 일률적으로 적용하고 있다. 따라서, 본 연구에서는 3가지 종류의 연직배수재 필터를 대상으로 필터의 거동 및 필터폐색(Clogging)현상을 평가하고자 실내시험을 수행하였고, 이를 토대로 ${\bigcirc}{\bigcirc}$지역에서 연직배수재 필터의 설계(시방)기준을 선정하여 적용하였다.

• 한국재난정보학회 논문집
• /
• 제16권3호
• /
• pp.577-585
• /
• 2020

연구목적: 불포화토에서 발생하는 모관흡수력의 존재는 사면의 안정성을 증가시키지만, 강우침투 로 인한 모관흡수력의 감소는 갑작스런 사면 파괴를 유발하여 큰 재난을 발생시킬 수 있다. 본 논문에서는 우리나라의 대표적인 산흙인 화강풍화토에 대하여 불포화상태에서의 공학적 특성을 분석하였다. 연구방법:화강풍화토에 대하여 입도상태가 양호한 경우와 입도상태가 불량한 경우로 나누어 불포화 상태에서 함수특성곡선, 불포화투수곡선, 모관흡수력에 대한 불포화 전단강도 관계 등으로서 실험과 분석을 수행하였다. 연구결과: 입도분포가 불량한 경우가 입도분포가 균등한 경우에 비하여 체적함수비에 대한 모관흡수력의 변화가 급격히 발생하는 것으로 분석되었다. 입도가 균등한 경우가 입도가 불량한 경우에 비하여 동일한 모관흡수력에서 투수계수가 비교적 작은 값을 나타내었다. 모관흡수력이 크게 작용할수록 전단강도가 증가하는 경항을 보였다. 결론: 우리나라의 대표적인 산흙인 화강풍화토에 대하여 입도상태가 양호한 경우와 입도상태가 불량한 경우로 나누어 불포화상태에서의 공학적 특성인 함수특성곡선, 불포화투수계수, 불포화 전단강도 등에 대하여 실험을 실시하여 각각의 상관관계를 확보하였다.

• 펄프종이기술
• /
• 제34권5호
• /
• pp.18-38
• /
• 2002

A previous study on the model coatings based on latex-bound plastic pigment coatings (1) has been extended to latex-bound No. 1 clay, ultra-fine ground calcium carbonate (UFGCC), and clay-carbonate pigment mixture coatings, which are being widely used in the paper industry. The latex binder used was a good film-forming, monodisperse S/B latex or 0.15$\mu\textrm{m}$. No. 1 clay was representative of plate-like pigment particles, whereas UFGCC was of somewhat rounded rhombohedral pigment particlel. Both of them had negatively skewed triangular particle size distributions having the mean particle suet of 0.7${\mu}{\textrm}{m}$ and 0.6$\mu\textrm{m}$, respectively. Their packing volumes were found to be 62.5% and 657%, respectively. while their critical pigment volume concentrations (CPVC's) were determined to be 52.7% and 50.5% ( average of 45% caused by the incompatibility and 55.9% extrapolated) by coating porosity, respectively. Each pigment/latex coating system has shown its unique relationship between coating properties and pigment concentrations, especially above its CPVC. Notably, the clay/latex coating system hat shown higher coating porosity than the UFGCC/latex system at high pigment concentrations above their respective CPVC's. It was also found that their coating porosity and gloss were inter-related to each other above the CPVC's, as predicted by the theory. More interestingly, the blends of these two pigments have shown unique rheological and coating properties which may explain why such pigment blends are widely used in the industry. These findings have suggested that the unique structure of clay coatings and the unique high-shear rheology of ground calcium carbonate coatings can be judiciously combined to achieve superior coatings. Importantly, the low-shear viscosity of the blends was indicative of their unique packing and coating structure, whereas their high-shear rheology was represented by a common mixing rule, i.e., a viscosity-averaging. Transmission and scanning electron and atomic force microscopes were used to probe the state of pigment / latex dispersions, coating surfaces, freeze fractured coating cross-sections, and coating surface topography. These microscopic studies complemented the above observations. In addition, the ratio, R, of CPVC/(Pigment Packing Volume) has been proposed as a measure of the binder efficiency for a given pigment or pigment mixtures or as a measure of binder-pigment interactions. Also, a mathematical model has been proposed to estimate the packing volumes of clay and ground calcium carbonate pigments with their respective particle size distributions. As well known in the particle packing, the narrower the particle size distributions, the lower the packing volumes and the greater the coating porosity, regardless of particle shapes.

• 한국식품과학회지
• /
• 제14권1호
• /
• pp.21-29
• /
• 1982

우리나라 주요식품에 대한 조직감 표현은 다양하며 이들을 정리, 분류함으로써 각 식품에 대한 우리나라 사람들의 조직감 기호를 조사할 수 있었다. 밥류에서는 견고성, 응집성, 탄력성, 부착성이 특히 중요하였으며 입자의 형태, 크기, 배열과 수분 및 지방함량들도 중요하게 나타났다. 이중에서 탄력성이 높고 씹힘성이 큰 쫄깃쫄깃한 성질에 대한 기호도가 높으며 응집성과 견고성이 낮은 푸석푸석한 성질에 대하여 싫어하는 경향이 뚜렷이 나타났다. 국수류에서도 견고성, 응집성, 탄력성이 중요한 성질로 나타났으며 특히 견고성, 응집성, 탄력성이 큰 쫄깃쫄깃한 성질과 탄력성이 큰 말랑말랑한 성질에 대한 선호도가 컸으며 견고성이 너무 강하거나 약한 것에 대하여 싫어하는 경향이 나타났다. 김치류에서도 견고성, 응집성, 탄력성이 중요한 조직감 요소임을 알 수 있었으며 특히 견고성이 크나 응집성이 약한 성질 즉 아삭아삭, 사각사각 등으로 표현되는 깨어지는 성질에 대한 선호도가 크게 나타났으며 견고성이 너무 약화되는 것에 대하여 싫어하는 경향이 뚜렷이 나타났다.

• 한국차세대컴퓨팅학회논문지
• /
• 제13권5호
• /
• pp.39-50
• /
• 2017

이동 객체에 대한 추적 기술은 최근 중요성이 강조되고 있는 동영상 이해에서 가장 핵심적인 기술의 하나라 할 수 있다. 하지만, 동영상이 가지는 조명의 불안정, 객체의 크기나 형태 변화, 카메라 움직임, 그리고 중첩 등으로 인해 동영상 내의 이동 객체 추적은 많은 어려움을 가지고 있다. 객체 추적의 가장 대표적인 종래의 방법인 칼만 필터와 파티클 필터의 문제점을 개선하는 방법으로 스웜 기반의 방법이 제안되어 있으나 동적으로 변화하는 이동 객체의 특징을 반영하는 개선된 알고리즘이 요구된다. 본 논문에서는 이러한 특징을 반영하여 파티클 스웜 최적화 방법에서 사용되는 파라미터 중 가중치 값을 동적으로 변화하는 적응적 파라미터 제어 방법을 제안한다. 각 파티클을 특성에 따라 3가지 종류로 구분하고 각각 서로 다른 가중치 값을 부여하는 방식으로 객체 추적의 성능을 개선할 수 있다. 제안된 알고리즘의 적용 결과 중첩 또는 예측하기 어려운 움직임 등과 같은 객체의 비선형적인 움직임이 있는 동영상에 대해 기존 파티클 스웜 방식에 비해 현저한 성능 개선을 보이는 것을 확인할 수 있었다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.98-106
• /
• 2001

The deformation characteristics of cohesionless soils in Korea were investigated using resonant column tests. Total 60 samples, which were sampled from sedimentary and residual soils and reconstituted using controlled particle-size distributions, were prepared. The confining pressure applied in the tests ranges from 20 kPa to 500 kPa. The test results ware categorized into 3 groups including clean sands, silt and silty sand, and residual soils. Based on test results, the small-strain shear modulus(G$_{max}$) and damping ratio(D$_{min}$) were determined and the effects of confinement on G$_{max}$ and D$_{max}$ were characterized. The empirical correlations predicting G$_{max}$ were suggested for 3 group soils. Nonlinear deformational characteristics of clean sands are significantly affected by confining pressure and the ranges and mean curves for G and D are suggested considering the range of confining Pressure. The silt and silty sand and residual soils were weakly affected by confining pressure, so the representative ranges and curves, independent of confining pressure, were proposed.d.posed.d.

• 상하수도학회지
• /
• 제21권6호
• /
• pp.717-726
• /
• 2007

Fully-grown flocs in a mixing tank of membrane filtration with dead-end membrane are ruptured while passing through a pump and the ruptured flocs are aggregated again in a Membrane-Feed-Pipe (MFP). To look at more details, this study tries to relate the reaggregation to a parameter of mixing intensity in MFP, i.e., G-value. The G-value is a function of Reynolds number, pipe diameter, friction factor and average velocity in MFP. To deal with polydispersity condition, we develop a representative particle size called in this study EDPD (Effective Diameter for Polydispersity condition in Dead-end filtration). The experimental results show that as the G-value increases, the EDPD decreases and also the cake resistance increases. Through comparison between EDPD and cake resistance, these results show that cake resistances are controlled by reaggregation phenomenon in MFP. The effect of detention time in MFP, however, does not affect the reaggregation of the broken flocs as G-values are increased.